CasaTunes CT-4S, musicBox 6 Quick Start Manual

CasaTunes Setup

(Cont)

Enable all of the music services you are interested in.

Some music services require setting up SqueezeBox. Follow the directions in
CasaSetup.

Some music services require paid accounts, as noted in CasaSetup.

Quick Start Guide for 6 Room Music System

Follow these steps to install your CasaTunes

music system for up to 6 rooms.

SEE IMPORTANT NOTE ON NEXT PAGE!

Included Items

Now, name all of your sources and rooms and set your Time Zone and Update
settings. Check the Hide check box for any Sources or Rooms not used. Click on
Advanced Settings and use the Project Information page to create a backup of

the project.

Control

Use our control apps.

OR

Go to http://musicBox/CasaTunes on any

PC, or http://musicBox.local/CasaTunes on

any Mac connected to the network

Need Help?

Check out the videos at

http://www.YouTube.com/CasaTunes

Check out our Tech Notes at

http://www.CasaTunes.com/guides

For live help, email us at

[e-mail] or phone us at

888-855-2272

Network Cable Qty 1

Keypad Controls and Keypad Hub Connection Plate

Serial Cable Qty 1

Power Cable
Qty 2

Audio Cables
Qty 4

Connect the

Components

NOTE: Make sure the controller switch on the back of the
amplifier is set correctly:
Master = Zones 1-6
Slave 1 = Zones 7-12
Slave 2 = Zones 13-18
NOTE: Do not plug a live internet cable into the Keypad Jack!

Connect to LAN

and Power

Power Cable

Network Cable

From

external devices

(tuners, cable

boxes, etc.)

To Speakers

Use Audio Cables

to connect

stream outputs

to amplifier

Use optical
cable for 5th
stream
(optional,
supplied by
customer)

Connect serial
control cable.

Power Cable

CasaTunes Setup

Turn on the system at this time.

Open any browser on the

LAN and go to CasaSetup:

Click on Sources. “Source inputs” are the inputs on the back of the amplifier. They are
in the same order as the sources listed in the Sources page of CasaSetup.

For any source input that CasaTunes supplies a music stream, pick CasaTunes Media
Player as the Source
type and set the Player
Settings to match the
audio jack you are us­ing for that source in­put. For example, if
you connect the first
CasaTunes stream to
the first Source input, click on Player 1 and set the settings as shown here. You can
assign any CasaTunes Media Player to any of the Source inputs.

For other source inputs, such as the audio from a set top box, pick “Unknown” as the
Source type. Hide sources that are not used.

PC: http://musicBox/CasaSetup
Mac: http://musicBox.local/CasaSetup

Continued on back....