Casablanca Fan Company 59511, 59512, 59510 User Manual

30 inches

7 feet

Ladder

Table of Contents

www.CasablancaFanCo.com

1.888.227.2178

Congratulations on purchasing your new Casablanca® ceiling fan! It will provide comfort and performance in your home

or ofce for many years. This installation

and operation manual contains complete instructions for installing and operating

your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the

world.

To register your fan, please visit:

www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

Blades Troubleshooting

What to Expect with

Your Installation

2

Preparation

6

Switch Housing

Tools Needed

PAG E

Downrod

PAG E

Remote Control

Mounting Options

PAG E

3

Wiring Canopy

PAG E

7

Operation, Maintenance

& Cleaning

4

10

Ceiling Bracket

PAG E

?

PAG E

5

PAG E

11

12

13

PAG E

15

16

PAG E

?

PAG E

17

1

M6006-01 • 02/12/16 • © Casablanca Fan Company

What to Expect with Your Installation

If you are unfamiliar with wiring, use a

qualied electrician.

Must be able to secure the fan to building structure or

fan-rated outlet box

You may need a

friend to help you.

Know your wiring

30 inches

from blade tip to nearest wall or obstruction

from bottom

edge of blade

Assess location

Standard Downrod

1

for ceilings 8-10 feet high

7 feet

to the oor

www.CasablancaFanCo.com

1.888.227.2178

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or personal

injury, mount fan directly from building structure and/or an

outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch

location. If you cannot lock the circuit breakers in the off

position, securely fasten a prominent warning device, such as a

tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage, use only Casablanca Speed Control provided with this product.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades,

or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

Check box to see fan weight

Ceiling angles greater

than 34° will require an Angled Mounting Kit. See page 4 for details.

Assess ceiling angle

Shorter Downrod

2

for fans installed close to ceiling

Longer Downrod

3

for ceilings 10 feet or higher

Select a downrod length

2

M6006-01 • 02/12/16 • © Casablanca Fan Company

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Tools Needed

www.CasablancaFanCo.com

1.888.227.2178

Ladder

Pliers Wire Strippers

Power Drill

(optional)

If mounting to a support structure, you will also need these tools.

9/64” Drill Bit

(optional)

3

M6006-01 • 02/12/16 • © Casablanca Fan Company

Screwdrivers

O

34

CEILING

Mounting Options

www.CasablancaFanCo.com

1.888.227.2178

OPTION

If you have a at ceiling:

WALL

Hang your fan by a standard downrod (included).

Standard Mounting

1

Support Structure

OPTION

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

Use the three steps below to determine if your ceiling angle is greater than 34°

Angled Mounting

2

Standard Mounting Style

Ceiling

Outlet Box

(required)

Angled Mounting Style

Ceiling

Outlet Box

(required)

FOLD

on dotted line

1

N

O

I

T

A

U

T

I

S

1

34°

Guide Touches

BOTH Ceiling & Wall

You need ONLY

a Longer

Downrod

*most common

2 3

PLACE

against wall

2

N

O

I

T

A

U

T

I

S

Guide Touches

but NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

SLIDE

toward ceiling

Wall

to hang the fan from a at ceiling.

4

M6006-01 • 02/12/16 • © Casablanca Fan Company

Use Standard Mounting

or Low-Prole Mounting

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

Ceiling Bracket

Turn Power

OFF

www.CasablancaFanCo.com

For angled ceilings, point

opening toward peak.

1.888.227.21781.888.227.2178

Make sure all four bumpers are

still attached.

To avoid possible electrical shock, before

installing your fan, disconnect the power by turning off the circuit breakers to the outlet

box associated with the wall switch location.

Use wood screws

(included) when securing

to support structure with approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid in securing ceiling bracket

with hardware found in

the hardware bag.

5

M6006-01 • 02/12/16 • © Casablanca Fan Company

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

If you are unable to do this,

call Technical Support at

1-888-227-2178.

Refer to warning w.1 on pg. 2

Ceiling Bracket (continued)

Preparation

1.888.227.2178

www.CasablancaFanCo.com

E

P

K

!

D

I

S

C

A

R

D

1.888.227.2178

Remove the shipping blocks from the

motor. Save the screws. They will be

needed for blade iron installation.

Note: Some fans will have a shipping

ring instead of shipping blocks. Please

remove the ring and save the screws.

6

M6006-01 • 02/12/16 • © Casablanca Fan Company

Downrod

www.CasablancaFanCo.com

1.888.227.2178

Standard Downrod

for ceilings 8-10’ high

Option 1Option 2

Shorter Downrod

for fans installed close to ceiling

Included

(pre-assembled)

Longer Downrod

for angled ceilings or

Option 3

ceilings 10’ or

higher

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

1 2 3 4 5

Slide

678910

Included

Sold Separately

Steps 6-10 to reassemble with new pipe

7

M6006-01 • 02/12/16 • © Casablanca Fan Company

Downrod (continued)

www.CasablancaFanCo.com

1.888.227.2178

KEEP!

E

P

K

!

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

8”

M6006-01 • 02/12/16 • © Casablanca Fan Company

3/8”

T

U

C

P

I

R

T

S

&

8”

(not to scale)

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

3/8”

If the setscrew is not tightened

securely, the fan may fall.

8

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

www.CasablancaFanCo.com

1.888.227.2178

Put the wires and downrod through the canopy.

Let the canopy sit loosely on top of the fan.

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

9

M6006-01 • 02/12/16 • © Casablanca Fan Company

Wiring

Using an orange wire

coming from the ceiling,

www.CasablancaFanCo.com

1.888.227.2178

Note: To connect the wires,

E

C

I

L

I

M

N

O

R

F

G

hold the bare metal leads together and place a wire

E

C

I

L

I

M

O

R

F

N

G

connector over them, then twist

clockwise until tight.

O

R

F

Refer to CAUTION c.1 on pg. 2

Green/Yellow Stripe

(grounding)

F

A

M

N

Green/Yellow Stripe

Green/Yellow

Stripe

connector from

the hardware bag,

connect the three

grounding wires

Black (ungrounded)

Black

(green, green/yellow

stripe, or bare copper)

White (grounded) White

Using orange wire

connectors from

the hardware bag,

connect the black wire

(ungrounded) from

the ceiling to the black

wire from the fan.

Connect the white wire

downrod, and hanging

bracket.

(grounded) from the

ceiling to the white wire

from the fan.

F

R

O

M

C

E

I

L

I

G

N

T

E

K

C

A

R

B

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

F

R

N

O

A

F

M

10

M6006-01 • 02/12/16 • © Casablanca Fan Company

Canopy

Screw

Holes

www.CasablancaFanCo.com

1.888.227.2178

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

11

Blades

Lightly attach the blade irons to the

Remember the screws that

you kept after removing the

shipping blocks (page 6)? You

need them plus ve more from

the hardware bag for this step.

www.CasablancaFanCo.com

1.888.227.2178

Insert blade screws and washers found in

the hardware bag into the holes in the

blades, then secure each blade to a blade iron.

motor with screws found in

the hardware bag, then securely

tighten after both screws are attached.

12

Switch Housing

Feed the optional light kit wires through

housing, then wrap keyhole slots around

Insert the third screw, found in

www.CasablancaFanCo.com

1.888.227.2178

Screw two housing assembly screws from

the hardware bag halfway into the

mounting plate. It does not matter which

two screw holes you choose.

the center hole of the upper switch

the screws and twist counterclockwise.

13

the hardware bag, into place and

then tighten all three screws.

Make sure the upper switch housing is securely

attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch housing xture falling.

Switch Housing (continued)

www.CasablancaFanCo.com

CONGRATULATIONS!

YOU’RE DONE!

1.888.227.2178

Lift the lower switch housing up until the

holes line up with the screw holes in the

upper switch housing. Install the three

switch housing screws, found in

the hardware bag.

Make sure the lower switch housing is securely attached to the

upper switch housing. Failure to properly secure all 3 assembly screws could result in the switch housing xture falling.

14

Remote Control

www.CasablancaFanCo.com

1.888.227.2178

Turn Power

ON

Once the power is turned on, the

remote must be paired within 60 seconds. Pairing

is only required

once after initial

installation.

Battery Door

ECEON

1234

Set

ON

D

ON ECE

SET

1234

Battery

Remove battery door. Change

the dip switch settings if the

frequency matches a previously

installed remote transmitter. Install

A23 or MN21 alkaline battery in

the proper polarity and replace the

battery door. To pair the remote,

hold down the Set button for 5

seconds. Pairing is complete when

LED button ashes twice.

D

ON

D

ON ECE

1234

ON

SET

(If a light kit is installed)

If a light kit is installed on your

fan, choose the light bulb mode

by moving the toggle switch.

Move the switch towards the “D”

for CFL bulbs and toward “ON”

for standard bulbs. Replace the

battery door.

To install the transmitter cradle,

hand-tighten the provided

screws to mount the cradle to

the wall.

15

Operation, Maintenance & Cleaning

ON

D

ON ECE

1234

SET

LED

Fan

Speed

Off

Dial

www.CasablancaFanCo.com

1.888.227.2178

(Low)

To select fan speed press one of

the numbers on the Fan Speed Dial. To calibrate the fan speed,

run the fan on “6” for 90 seconds

after each AC power reset. The

LED light ashes to indicate a

signal has been sent to the fan.

(High)

Reverse

Light

(If light kit is installed)

To reverse the air ow direction,

press the Reverse button while

fan is running. Press Light button

to turn lights off/on. To dim the

lights, press the light button for

more than one second. Light will

cycle from brightest to dimmest.

Release the light button when

desired brightness is achieved.

+

_

To change the battery, remove

the battery door. Remove battery

and replace with A23 or MN21

alkaline battery. Please observe

proper polarity placement.

For cleaning the fan, use soft

brushes or cloths to prevent

scratching. Cleaning products

may damage the nishes.

16

Troubleshooting

www.CasablancaFanCo.com

1.888.227.2178

Fan doesn’t work

• Make sure the wall switch is on.

• Press a fan speed button (1-6).

• Check the circuit breaker to ensure the power is turned on.

• Check the transmitter battery.

• Make sure that you have paired the remote.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy and check all the connections according to the wiring diagram

on page 10.

Excessive wobbling

• Tighten all of the blade and

blade iron screws until they

are snug.

• Turn the power off, support

the fan carefully, and check that the hanger ball is

properly seated.

• Use the provided balancing

kit and instructions to balance

the fan.

Noisy Operation

• Tighten the blade and blade iron screws until they are snug.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

Remote doesn’t work

• Install a fresh battery in the wall control.

• Make sure you have paired the remote.

17

AUTHORIZED SERVICE CENTERS

For the most updated listing of Casablanca Authorized Service Centers, visit www.CasablancaFanCo.com or

call toll free 1-888-227-2178.

Casablanca Fan Company 59511, 59512, 59510 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual