Casablanca Fan Company 59105, 59107, 59106, 59110 User Manual

Download

30 inches

7 feet

Ladder

Table of Contents

www.CasablancaFanCo.com

1.888.227.2178

Congratulations on purchasing your new Casablanca® ceiling fan! It will provide comfort and performance in your home

or ofce for many years. This installation

and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan, please visit:

www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

What to Expect with

Your Installation

Tools Needed

PAG E

Wiring CanopyDownrod

PAG E

Remote Control

Mounting Options

PAG E

Operation, Maintenance

& Cleaning

Ceiling Bracket

PAG E

TroubleshootingLight Kit

PAG E

Blades

PAG E

M8517-01 • 11/11/13 • © Casablanca Fan Company

PAG E

What to Expect with Your Installation

If you are unfamiliar with wiring, use a

qualied electrician.

Must be able to secure the fan to building structure or fan-rated outlet box

You may need a friend to help you.

Know your wiring

30 inches

from blade tip to nearest wall or obstruction

from bottom

edge of blade

Assess location

Standard Downrod

for ceilings 8-10 feet high

7 feet

to the oor

www.CasablancaFanCo.com

1.888.227.2178

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg)

and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage,

use only Casablanca Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

Check box to see fan weight

Ceiling angles greater

than 34° will require an

Angled Mounting Kit. See page 4 for details.

Assess ceiling angle

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Select a downrod length

M8517-01 • 11/11/13 • © Casablanca Fan Company

c.1 - All wiring must be in accordance with national and local

electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Tools Needed

www.CasablancaFanCo.com

1.888.227.2178

Ladder

Pliers Wire Strippers

Power Drill

(optional)

If mounting to a support structure, you will also need these tools.

9/64” Drill Bit

(optional)

M8517-01 • 11/11/13 • © Casablanca Fan Company

Screwdrivers

CEILING

Mounting Options

www.CasablancaFanCo.com

1.888.227.2178

OPTION

If you have a at ceiling:

WALL

Hang your fan by a standard downrod (included).

Standard Mounting

Support Structure

OPTION

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

Use the three steps below to determine if your ceiling angle is greater than 34°

Angled Mounting

Standard Mounting Style

Ceiling

Outlet Box

(required)

Angled Mounting Style

Ceiling

Outlet Box

(required)

FOLD

on dotted line

34°

Guide Touches

BOTH Ceiling & Wall

You need ONLY

a Longer

Downrod

*most common

2 3

PLACE

against wall

Guide Touches

but NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

SLIDE

toward ceiling

Wall

to hang the fan from a at ceiling.

M8517-01 • 11/11/13 • © Casablanca Fan Company

Use Standard Mounting

or Low-Prole Mounting

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

Ceiling Bracket

Turn Power

OFF

For angled ceilings, point

opening toward peak.

www.CasablancaFanCo.com

1.888.227.21781.888.227.2178

Make sure all four bumpers are

still attached.

Refer to warning w.1 on pg. 2

If you are unable to do this,

call Technical Support at

1-888-277-2178.

M8517-01 • 11/11/13 • © Casablanca Fan Company

Use wood screws

(included) when securing

to support structure with approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

To avoid possible electrical shock, before

installing your fan, disconnect the power by turning off the circuit breakers to the outlet

box associated with the wall switch location.

Downrod

www.CasablancaFanCo.com

1.888.227.2178

Standard Downrod

for ceilings 8-10’ high

Option 1Option 2

Shorter Downrod

for fans installed close to ceiling

Included

(pre-assembled)

Longer Downrod

for angled ceilings or

Option 3

ceilings 10’ or higher

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

1 2 3 4 5

Slide

678910

Included

Sold Separately

Steps 6-10 to reassemble with new pipe

M8517-01 • 11/11/13 • © Casablanca Fan Company

Downrod (continued)

www.CasablancaFanCo.com

1.888.227.2178

KEEP!

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

8”

M8517-01 • 11/11/13 • © Casablanca Fan Company

3/8”

8”

(not to scale)

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

3/8”

If the setscrew is not tightened securely, the fan may fall.

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

www.CasablancaFanCo.com

1.888.227.2178

Put the wires and downrod through the canopy.

Let the canopy sit loosely on top of the fan.

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

M8517-01 • 11/11/13 • © Casablanca Fan Company

Wiring

Using an orange wire

www.CasablancaFanCo.com

1.888.227.2178

Note: To connect the wires,

hold the bare metal leads together and place a wire

connector over them, then twist

clockwise until tight.

Refer to CAUTION c.1 on pg. 2

Green/Yellow Stripe

(grounding)

Green/Yellow Stripe

Green/Yellow

Stripe

connector from

the hardware bag,

connect the three

grounding wires

Black (ungrounded)

Black

(green, green/yellow

stripe, or bare copper)

coming from the ceiling,

downrod, and hanging

bracket.

White (grounded) White

Using orange wire

connectors from

the hardware bag,

connect the black wire

(ungrounded) from

the ceiling to the black

wire from the fan.

Connect the white wire

(grounded) from the

ceiling to the white wire

from the fan.

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

M8517-01 • 11/11/13 • © Casablanca Fan Company

Canopy

Screw

Holes

www.CasablancaFanCo.com

1.888.227.2178

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

M8517-01 • 11/11/13 • © Casablanca Fan Company

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

Blades

www.CasablancaFanCo.com

1.888.227.2178

Attach a blade tip to each blade using

two blade tip screws, found in

the hardware bag.

Insert four blade assembly screws and four

blade washers, found in the hardware bag, into each blade as shown. Install the

screws into the posts in each blade arm.

M8517-01 • 11/11/13 • © Casablanca Fan Company

Light Kit

Bulb

Tab

Notch

www.CasablancaFanCo.com

CONGRATULATIONS!

YOU’RE DONE!

1.888.227.2178

Install a halogen bulb in the light

socket. When necessary, replace with bulbs of the same type and

wattage.

Position the notches in the outer

rim of the globe so they line up

with the tabs on the inside of the

rim on the light kit.

Carefully lift the globe up inside the

light kit as far as it will go, then rotate

the globe clockwise until it is held

tightly in place by the four tabs.

See next page for fan operation instructions.

Remote Control

www.CasablancaFanCo.com

1.888.227.2178

Turn Power

Once the power is turned on, the

remote must be paired within 60 seconds. Pairing

is only required

once after initial

installation.

Battery

Door

ECEON

1234

Set

ON ECE

SET

1234

Battery

Remove battery door. Change the

dip switch settings if the frequency

matches a previously installed remote

transmitter. Install A23 or MN21

alkaline battery in the proper polarity

and replace the battery door. To pair

the remote, hold down the Set button

for 5 seconds. Pairing is complete

when LED button ashes twice.

ON ECE

1234

SET

If a light kit is installed on your

fan, choose the light bulb

mode by moving the toggle

switch. For halogen bulbs, set

the switch to “ON.” Replace the

battery door.

To install the transmitter

cradle, hand-tighten the

provided screws to mount the

cradle to the wall.

Operation, Maintenance & Cleaning

ON ECE

1234

SET

LED

Fan Speed

Off

Dial

www.CasablancaFanCo.com

1.888.227.2178

(Low)

To select fan speed press one of

the numbers on the Fan Speed

Dial. To calibrate the fan speed,

run the fan on “6” for 90 seconds

after each AC power reset. The

LED light ashes to indicate a

signal has been sent to the fan.

(High)

Reverse

Light

To reverse the air ow direction,

press the Reverse button while

fan is running. Press Light button

to turn lights off/on. To dim the

lights, press the light button for

more than one second. Light will

cycle from brightest to dimmest.

Release the light button when

desired brightness is achieved.

To change the battery, remove

the battery door. Remove battery

and replace with A23 or MN21

alkaline battery. Please observe

proper polarity placement.

For cleaning the fan, use soft

brushes or cloths to prevent

scratching. Cleaning products

may damage the nishes.

Troubleshooting

www.CasablancaFanCo.com

1.888.227.2178

Fan doesn’t work

• Press a fan speed button (1-4).

• Check the circuit breaker to

ensure the power is turned on.

• Check the wall control battery.

• Make sure that you have paired

the wall control.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy and check all the connections according to the wiring diagram on page 9.

Excessive wobbling

• Tighten all of the blade screws

until they are snug.

• Turn the power off, support

the fan carefully, and check that the hanger ball is properly seated.

• Use the provided balancing kit and instructions to balance the fan.

Remote doesn’t work

• Install a fresh battery in the wall control.

• Make sure you have paired the remote.

Noisy Operation

• Tighten the blade and blade

iron screws until they are snug.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

Fan speeds are incorrect

• Turn power from the circuit

breaker off and back on, then

run the fan on speed “6” for at

least 90 seconds and check the fan speeds again.

AUTHORIZED SERVICE

CENTERS

For the most updated list of

Casablanca Authorized Service

Centers, visit

www.CasablancaFanCo.com or

call toll free 1-888-227-2178.

Casablanca Fan Company 59105, 59107, 59106, 59110 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual