Casablanca Fan Company 55019 User Manual

Download

Table of Contents

30 inches

7 feet

Ladder

To register your fan, please visit:

www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

Congratulations on purchasing your new Casablanca® ceiling fan! It will provide comfort and performance in

your home or ofce for many years. This installation and

operation manual contains complete instructions for

installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere

in the world.

What to Expect with

Your Installation

www.CasablancaFanCo.com

Tools Needed

PAG E

WiringDownrodPreparation

Mounting Options

PAG E

Wall Control

Ceiling Bracket

PAG E

1.888.227.2178

PAG E

Canopy

Blades

PAG E

Switch Housing

PAG E

Operation

PAG E

Maintenance

& Cleaning

Troubleshooting

PAG E

What to Expect with Your Installation

If you are unfamiliar with wiring, use a

qualied electrician.

Must be able to secure the fan to building structure or

fan-rated outlet box

You may need a

friend to help you.

Know your wiring

30 inches

from blade tip to nearest wall or obstruction

from bottom

edge of blade

Assess location

Standard Downrod

for ceilings 8-10 feet high

7 feet

to the oor

www.CasablancaFanCo.com

1.888.227.2178

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or personal

injury, mount fan directly from building structure and/or an

outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch

location. If you cannot lock the circuit breakers in the off

position, securely fasten a prominent warning device, such as a

tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage, use only Casablanca Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades,

or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

Check box to see fan weight

Ceiling angles greater

than 34° will require an Angled Mounting Kit. See page 4 for details.

Assess ceiling angle

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Select a downrod length

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Tools Needed

www.CasablancaFanCo.com

1.888.227.2178

Ladder

Pliers Wire Strippers

Power Drill

(optional)

If mounting to a support structure, you will also need these tools.

9/64” Drill Bit

(optional)

Screwdrivers

CEILING

Mounting Options

www.CasablancaFanCo.com

1.888.227.2178

OPTION

If you have a at ceiling:

WALL

Hang your fan by a standard downrod (included).

Standard Mounting

Support Structure

OPTION

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

Use the three steps below to determine if your ceiling angle is greater than 34°

Angled Mounting

Standard Mounting Style

Ceiling

Outlet Box

(required)

Angled Mounting Style

Ceiling

Outlet Box

(required)

FOLD

on dotted line

34°

Guide Touches

BOTH Ceiling & Wall

You need ONLY

a Longer

Downrod

*most common

2 3

PLACE

against wall

Guide Touches

but NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

SLIDE

toward ceiling

Wall

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

Ceiling Bracket

Turn Power

OFF

For angled ceilings, point

opening toward peak.

www.CasablancaFanCo.com

1.888.227.21781.888.227.2178

Make sure all four bumpers are

still attached.

Refer to warning w.1 on pg. 2

If you are unable to do this,

call Technical Support at

1-888-277-2178.

Use wood screws

(included) when securing

to support structure with approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

To avoid possible electrical shock, before

installing your fan, disconnect the power by turning off the circuit breakers to the outlet

box associated with the wall switch location.

Preparation

Time Saver Tip: Get a helper

to insert grommets, found in

the hardware bag, into the

blades while you’re doing the

next couple of steps.

www.CasablancaFanCo.com

Remove the shipping blocks from the

motor. Save the screws. They will be

needed for blade iron installation.

Note: Some fans will have a shipping

ring instead of shipping blocks. Please

remove the ring and save the screws.

1.888.227.2178

Downrod

www.CasablancaFanCo.com

1.888.227.2178

Standard Downrod

for ceilings 8-10’ high

Option 1Option 2

Shorter Downrod

for fans installed close to ceiling

Included

(pre-assembled)

Longer Downrod

for angled ceilings or

Option 3

ceilings 10’ or

higher

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

1 2 3 4 5

Slide

678910

Included

Sold Separately

Steps 6-10 to reassemble with new pipe

Downrod (continued)

www.CasablancaFanCo.com

1.888.227.2178

KEEP!

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

8”

3/8”

8”

(not to scale)

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

3/8”

If the setscrew is not tightened

securely, the fan may fall.

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

www.CasablancaFanCo.com

1.888.227.2178

Put the wires and downrod through the canopy.

Let the canopy sit loosely on top of the fan.

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

Wiring

Place the receiver on top of the downrod

Receiver

Note: To connect the wires, hold

the bare metal leads together and place a wire connector over them,

then twist clockwise until tight.

www.CasablancaFanCo.com

1.888.227.2178

assembly as shown.

Refer to CAUTION c.1 on pg. 2

Using an orange wire connector

from the hardware bag:

Connect the 3 grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling, downrod, and ceiling bracket.

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

green/yellow

stripe (grounding)

green/yellow stripe

green/yellow

stripe

Wiring (continued)

www.CasablancaFanCo.com

1.888.227.2178

Using the orange wire connectors from the remote control hardware bag:

• Connect the yellow wire from the receiver to the black wire

from the fan.

• Connect the blue wire from the receiver to the blue wire (or

possibly black with white stripe

wire) from the fan.

Refer to CAUTION c.1 on pg. 2

yellow

black

blue

Using the orange wire connectors

black

(ungrounded)

white (grounded)

from the hardware bag:

• Connect the black (ungrounded)

wire from the ceiling to the black

wire from the receiver.

white

blue

• Connect the white (grounded)

wire from the ceiling to both the white wire from the receiver and

black

the white wire from the fan.

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Wall Control

Template

Drill Holes

Painter’s

Tape

Template

Screw

Cut-Out

Drywall

Anchors

Template

Drywall

www.CasablancaFanCo.com

Before

Cover Plate

After

1.888.227.2178

1. Tape the provided wall control

template with painter’s tape at

the desired installation area.

2. Drill holes inside the four corners of the template.

Note: Make sure the wall control template is level before

proceeding to the next step.

If you are using a outlet box for wall control installation, the wires coming from the wall

control must be grounded using the attached green wire. If not placed in an outlet box, cap

the green wire coming from the wall control with an included wire nut.

1. Using a 9/64 drill bit, drill a hole in each screw cut-out on the wall control template.

2. Using a hammer, tap a drywall

anchor found in the wall control hardware bag into each hole

until the drywall anchor is ush with the wall.

1. Using a drywall punch saw,

cut out the interior shape of the template using one of the four drilled corners as a

starting point.

2. Remove the template and the cut-out section of drywall.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

1. Insert the wall control into the dry wall cut out.

2. Align the screw holes in the wall control with the drywall anchors.

3. Install the cover plate using

a Phillips Head screwdriver to secure the two cover plate screws found in the wall control hardware bag through the wall control and into the drywall

anchors.

Canopy

Screw

Holes

www.CasablancaFanCo.com

1.888.227.2178

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

Blades

Lightly attach the blade irons to the

Insert grommets found in the hardware

Remember the screws that

you kept after removing the

shipping blocks (page 6)? You

need them plus ve more from

the hardware bag for this step.

www.CasablancaFanCo.com

1.888.227.2178

Blades sold separately

bag into the holes in the blades, then

secure each blade to a blade iron with

screws found in the hardware bag.

motor with screws found in

the hardware bag, then securely

tighten after both screws are attached.

Switch Housing

Feed the wire plug through the center

wrap keyhole slots around the screws and

Screw two housing assembly screws

www.CasablancaFanCo.com

1.888.227.2178

from the hardware bag halfway into

the motor housing. It does not matter

which two screw holes you choose.

hole of the upper switch housing, then

twist counterclockwise.

Insert the third screw, found in

the hardware bag, into place and

then tighten all three screws.

Make sure the upper switch housing is securely

attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch housing xture falling.

Switch Housing (continued)

www.CasablancaFanCo.com

CONGRATULATIONS!

YOU’RE DONE!

1.888.227.2178

Connect the plugs from the upper and

lower switch housings. Make sure to

line up the colored markings on the

connectors.

Lift the lower switch housing up until the

holes line up with the screw holes in the

upper switch housing. Install the three

switch housing screws, found in

the hardware bag.

Make sure the lower switch housing is securely attached to the

upper switch housing. Failure to properly secure all 3 assembly screws could result in the switch housing xture falling.

Operation

www.CasablancaFanCo.com

1.888.227.2178

Battery

Holder

Battery Door

Before operating the wall control,

press on the battery door to eject it.

Unscrew the battery holder. Insert the

battery, found in the control hardware

bag, with the positive (+) side facing

downward. Reinstall the battery

holder and reinsert the battery door

into the wall control.

Turn Power

The remote transmitter is already paired

to the receiver and ready to use.

Note: If you would like to operate

multiple fans or multiple remotes,

or if your remote is not working,

please see the Troubleshooting

section at the end of this manual.

Fan

(Low)

Speed

(High)

Lights Down

Reverse

Battery

Holder

Quickly press the up or down arrow to turn the

lights off and on. Hold the up or down arrow to

dim or raise the light level. The reverse button

changes the direction that the blades turn. The

power button turns the fan off and on.

Dimming Mode: If you are using dimmable

bulbs, you must rst set your remote to

Dimming Mode. To toggle Dimming Mode on

or off, hold down the Fan Power button while

pressing the Light Down arrow twice.

Fan

Speed

Lights

Fan

Power

Maintenance & Cleaning

Reverse

Button

www.CasablancaFanCo.com

1.888.227.2178

(a)

Turn Power

(b)

The reverse button on the wall

control changes the air ow

direction. In warm weather, use

(a) downward air ow pattern.

In cold weather, use (b) upward

air ow pattern.

Battery

Battery Door

To change the battery, push on

the battery door to eject it. Remove

the battery using a small Phillip’s

head screwdriver. Replace with

same type battery, making sure

the (+) side is facing down. Replace

battery holder and battery door.

For cleaning the fan, use soft

brushes or cloths to prevent

scratching. Cleaning products

may damage the nishes.

Casablanca fans have the power to cut your cooling

costs up to 40%.

Beat the High Cost of Cooling

The air movement created by a Casablanca ceiling

fan lets you set your thermostat higher and still stay

comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. So, you can cut back on expensive air conditioning ... and save up to 40%* on cooling. In winter, your Casablanca fan recirculates warm air and saves up to 10%* on heating bills. * On average at low speed settings. Your savings may

vary based on climate, building type and thermostat

setting.

Save Energy and Money While Protecting the Environment

Congratulations! You’re saving energy and money while protecting the environment by purchasing this ENERGY

STAR qualied Casablanca ceiling fan! With this purchase, you are doing your part to protect the environment. Your new ceiling fan has earned the ENERGY STAR label because it meets high energy efciency specications set by the Environmental Protection Agency (EPA). ENERGY STAR labeled ceiling fans save energy because they have more efcient fan motors and air delivery due to more aerodynamic blade congurations. Ceiling fan models bearing the ENERGY STAR label move air 14 - 20% more efciently than typical ceiling fan models. For more information on ENERGY STAR, visit www.energystar.gov.

Troubleshooting

www.CasablancaFanCo.com

1.888.227.2178

Fan doesn’t work

• Press a fan speed button (1-4).

• Check the circuit breaker to ensure the power is turned on.

• Check the wall control battery.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy and check all the connections according to the wiring diagram

on pages 10-11.

• Check the plug connection in the switch housing.

Excessive wobbling

• Tighten all of the blade and

blade iron screws until they

are snug.

• Turn the power off, support

the fan carefully, and check that the hanger ball is

properly seated.

• Use the provided balancing

kit and instructions to balance

the fan.

Noisy Operation

• Tighten the blade and blade iron screws until they are snug.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

Remote does not work

• Make sure the battery is installed correctly.

• Install a new battery.

• If the remote still does not

work, you may need to pair

your remote. To prevent faulty operation, please disconnect power (at the wall switch, breaker, or fan) from all other ceiling fans within range while pairing. To pair: cycle power

to the fan by turning power off and back on at the wall switch

(or circuit breaker if necessary).

Within three minutes, press and

hold both the Fan Off button and the 4 button for four seconds to pair the remote. If applicable, the

fan will turn on and the lights

will ash and stay on to indicate successful pairing.

AUTHORIZED SERVICE

CENTERS

For the most updated list of

Casablanca Authorized Service Centers, visit

www.CasablancaFanCo.com or call toll free 1-888-227-2178.

Troubleshooting (continued)

www.CasablancaFanCo.com

1.888.227.2178

Installing Multiple Fans with Independently Operating Remote Controls

To install multiple fans with independently operating remote controls, there is no need to

perform any pairing procedures. Each set of receiver/transmitter is already paired. Simply

install each receiver into a fan and use the appropriate transmitter to operate each fan.

If your remote is not working, see the “Remote does not work” section on the previous page.

Installing Multiple Fans Operating on a Single Remote Control

To have multiple fans operated by a single remote control, you must pair the transmitter to each

additional receiver. The receiver that shipped with your fan is already paired to the transmitter.

Note: To prevent faulty operation, you MUST disconnect power (at the wall switch,

breaker, or fan) from all other ceiling fans within range while pairing each fan.

For each additional fan, ensure that a compatible receiver is installed. Disconnect power from all

other fans while pairing. To pair: cycle power to the fan by turning power off and back on at

the wall switch (or circuit breaker if necessary). Within three minutes, press and hold both

the Fan Off button and the 4 button for four seconds to pair the remote. If applicable, the

fan will turn on and the lights will ash and stay on to indicate successful pairing.

Installing One Fan Operating on Multiple Remote Controls

To have multiple remote controls operate one fan, you must pair each additional transmitter

to the receiver in the fan. The transmitter that shipped with your fan is already paired.

Note: To prevent faulty operation, please disconnect power (at the wall switch,

breaker, or fan) from all other ceiling fans within range while pairing.

For each additional transmitter, cycle power to the fan by turning power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes, press and hold both the Fan Off button and the 4 button for four seconds to pair the remote. If applicable, the

fan will turn on and the lights will ash and stay on to indicate successful pairing.

“Unpairing” Procedure for Faulty Operation of Remote Controls

If a transmitter is mistakenly operating a fan, you need to “unpair” the transmitter from that

fan’s receiver. The “unpairing” procedure is the same as the pairing procedure.

Note: To prevent faulty operation, you MUST disconnect power (at the wall switch,

breaker, or fan) from all other ceiling fans within range while “unpairing” a fan.

Disconnect power from all other fans while “unpairing.” Then, cycle power to the fan you

wish to “unpair” by turning power off and back on at the wall switch (or circuit breaker

if necessary). Within three minutes, press and hold both the Fan Off button and the 4

button for four seconds to “unpair” the remote. If applicable, the fan will turn off and the

lights will ash and turn off to indicate successful “unpairing.”

Casablanca Fan Company 55019 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual