Congratulations on purchasing
www.CasablancaFanCo.com/register
Table of Contents
30 inches
7 feet
Ladder
www.CasablancaFanCo.com
1.888.227.2178
your new Casablanca® ceiling
fan! It will provide comfort and
performance in your home or ofce
for many years. This installation
and operation manual contains
complete instructions for installing
and operating your fan.
We are proud of our work and
appreciate the opportunity to
supply you with the best ceiling fan
available anywhere in the world.
To register your fan please visit:
What to Expect with
Your Installation
2
Preparation
6
Blades
Tools Needed
PAG E
PAG E
Switch Housing
3
7
Mounting Options
PAG E
Wiring
PAG E
Maintenance &
Cleaning
3
10
Ceiling Bracket
Installation
PAG E
CanopyDownrod
PAG E
Troubleshooting
?
PAG E
5
PAG E
11
?
PAG E
12
1
M6002-01 • 06/07/12 • Casablanca Fan Company
13
PAG E
ON
15
PAG E
?
PAG E
16
What to Expect with Your Installation
If you are unfamiliar
with wiring, use a
qualied electrician.
Must be able to
secure the fan to
building structure or
fan-rated outlet box
You may need a
friend to help you.
Know your wiring
30 inches
from blade tip to
nearest wall or
obstruction
From bottom
edge of blade
Assess location
Standard Downrod
1
for ceilings 8-10 feet high
7 feet
to the oor
www.CasablancaFanCo.com
1.888.227.2178
Read and Save These Instructions
This product conforms to UL Standard 507.
WARNINGS
w.1 - To reduce the risk of re, electrical shock, or personal
injury, mount fan directly from building structure and/or an
outlet box marked acceptable for fan support of 70 lbs (31.8 kg)
and use the mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or
servicing your fan, disconnect the power by turning off the
circuit breakers to the outlet box and associated wall switch
location. If you cannot lock the circuit breakers in the off
position, securely fasten a prominent warning device, such as a
tag, to the service panel.
w.3 - To reduce the risk of re, electrical shock, or motor damage,
use only Casablanca Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade
brackets when installing the blade brackets, balancing the blades,
or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
CAUTIONS
Check box to see
fan weight
Ceilings that are more
than 34° will require an
angled mounting kit.
See page 3 for details.
Assess ceiling angle
Shorter Downrod
2
for fans installed close to ceiling
Longer Downrod
3
for ceilings 10 feet or higher
Select a downrod length
2
M6002-01 • 06/07/12 • Casablanca Fan Company
c.1 - All wiring must be in accordance with national and local
electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring,
use a qualied electrician.
c.2 - Use only Casablanca replacement parts.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions may cause
harmful interference to radio communications.
Tools Needed
Mounting Options
www.CasablancaFanCo.com
CEILING
O
34
1.888.227.2178
Ladder
Pliers
If installing an outlet box, you will also need:
Wire Strippers
1
OPTION
2
OPTION
1
FOLD
on dotted line
Flat
Angled
Use this guide to determine
which mounting option is
appropriate for your ceiling type.
skip to next page
1. You will need a Longer Downrod
sold separately
2. You may need an Angle Mounting Kit
sold separately
Use the 3 steps below to determine if
your ceiling angle is greater than 34°
2 3
PLACE
against wall
SLIDE
toward ceiling
WALL
Screwdrivers
Power Drill
(optional)
9/64” Drill Bit
(optional)
3
M6002-01 • 06/07/12 • Casablanca Fan Company
Guide Touches
BOTH Ceiling & Wall
1
N
O
I
T
A
U
T
I
S
You need ONLY
a Longer
Downrod
*most common
N
O
I
T
A
U
T
I
S
2
Guide Touches
but NOT Ceiling
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
Wall
Mounting Options (continued)
Use Standard or Low-Prole Mounting
Use Angled Mounting to hang the
www.CasablancaFanCo.com
1.888.227.2178
Support Brace
Standard
Mounting
Style
to hang the fan from a at ceiling by a
standard downrod (included).
Ceiling
Outlet Box
(required)
Support Brace
Ceiling
Outlet Box
(required)
8
12
Angled
Mounting
Style
fan from a vaulted or angled ceiling
(see previous page).
4
M6002-01 • 06/07/12 • Casablanca Fan Company
Ceiling Bracket Installation
Turn Power
OFF
www.CasablancaFanCo.com
www.CasablancaFanCo.com
For angled ceilings, point
opening toward peak.
1.888.227.2178
1.888.227.2178
Make sure all four (4) bumpers
are still attached.
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Use wood screws
(included) when securing
to support structure with
approved electrical outlet
box. Drill 9/64” pilot holes
in support structure to aid
in securing ceiling bracket
with hardware found in
the hardware bag.
5
M6002-01 • 06/07/12 • Casablanca Fan Company
Use machine screws
(provided with outlet
box) when securing to
existing ceiling fan-rated
outlet box. Make sure
it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
If you are unable to do this,
call Technical Support at
1-888-227-2178.
Refer to warning w.1 on pg. 2
Ceiling Bracket Installation (continued)
Remove the shipping blocks from
Time Saver Tip:
next couple of steps.
Preparation
E
E
P
K
!
D
I
S
C
A
R
D
the motor. Save the ve screws.
They will be needed for blade iron
installation.
www.CasablancaFanCo.com
Get a helper
to insert grommets, found in
the hardware bag, into the
blades while you’re doing the
1.888.227.2178
6
M6002-01 • 06/07/12 • Casablanca Fan Company
Downrod
www.CasablancaFanCo.com
1.888.227.2178
Standard
Downrod
for ceilings 8-10’ high
Option 1Option 2
Shorter
Downrod
for fans installed
close to ceiling
Included
(pre-assembled)
Longer
Downrod
for angled
ceilings or
Option 3
ceilings 10’ or
higher
skip to next page
If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe
1 2 3 4 5
Slide
Slide
678910
Included
Sold Separately
Steps 6-10 to reassemble with new pipe
7
M6002-01 • 06/07/12 • Casablanca Fan Company
Downrod (continued)
www.CasablancaFanCo.com
1.888.227.2178
KEEP!
E
E
P
K
!
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
8”
M6002-01 • 06/07/12 • Casablanca Fan Company
3/8”
T
U
C
P
I
R
T
S
&
8”
(not to scale)
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
3/8”
If the setscrew is not tightened
securely, the fan may fall.
8
Downrod (continued)
DO NOT PICK THE FAN UP BY THE
Put the wires and downrod through the
canopy. Let the canopy sit loosely on top
www.CasablancaFanCo.com
1.888.227.2178
of the fan.
CANOPY OR WIRES. Place the downrod
ball into the slot in the ceiling bracket.
9
M6002-01 • 06/07/12 • Casablanca Fan Company
Wiring
Using an orange wire
connect the 3 grounding
copper) coming from the
www.CasablancaFanCo.com
1.888.227.2178
Note: To connect the wires,
E
C
I
L
I
M
O
R
F
N
G
hold the bare metal leads
together and place a wire
E
C
I
L
I
M
O
R
F
N
G
connector over them, then twist
clockwise until tight.
green/yellow stripe
(grounding)
F
A
M
N
O
R
F
Refer to CAUTION c.1 on pg. 2
green/yellow stripe
F
R
O
M
C
E
I
L
green/yellow stripe
I
N
Using orange wire
connectors from
the hardware bag,
connector from
the hardware bag,
connect the black wire
(ungrounded) from the
ceiling to the black and
wires (green, green/
yellow stripe, or bare
the blue wires from the
fan. Connect the white
wire (grounded) from
ceiling, downrod, and
hanging bracket.
T
E
K
C
A
R
B
G
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
F
R
O
M
N
A
F
the ceiling to the white
wire from the fan.
10
M6002-01 • 06/07/12 • Casablanca Fan Company
Canopy
Screw
Holes
www.CasablancaFanCo.com
1.888.227.2178
Position the canopy so that, when
lifted into place, the canopy ts into
the hanging bracket as shown.
Lift the canopy into place so that
the screw holes are aligned.
M6002-01 • 06/07/12 • Casablanca Fan Company
Insert the two canopy screws
found in the hardware bag.
Note: Fan style may vary.
11
Blades
Insert grommets found in the hardware
Lightly attach the blade irons to the
Remember the screws that
you kept after removing the
shipping blocks (page 5)? You
need them plus ve more from
hardware bag for this step.
www.CasablancaFanCo.com
1.888.227.2178
bag into the holes in the blades, then
secure each blade to a blade iron with
screws found in the hardware bag.
motor with screws found in
the hardware bag, then securely
tighten after both screws are attached.
12
12
M6002-01 • 06/07/12 • Casablanca Fan Company
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the nishes.
Switch Housing
Feed the wire plug through the center
wrap keyhole slots around the screws and
Screw two (2) housing assembly screws
Insert the third screw, found in
www.CasablancaFanCo.com
1.888.227.2178
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
hole of the upper switch housing, then
twist counterclockwise.
13
M6002-01 • 06/07/12 • Casablanca Fan Company
the hardware bag, into place and then
tighten all three (3) screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
Switch Housing (continued)
www.CasablancaFanCo.com
1.888.227.2178
Connect the plugs from the upper and
lower switch housings. Make sure to
line up the colored markings on the
connectors.
Lift the lower switch housing up until the
holes line up with the screw holes in the
upper switch housing. Install the three (3)
switch housing screws, found in
the hardware bag.
14
M6002-01 • 06/07/12 • Casablanca Fan Company
Connect the fandangle to the short chain
coming from the switch housing.
Make sure the lower switch housing is securely attached to the
upper switch housing. Failure to properly secure all 3 assembly
screws could result in the switch housing xture falling.
Switch Housing (continued)
CONGRATULATIONS!
YOU’RE DONE!
Maintenance & Cleaning
Turn Power
ON
www.CasablancaFanCo.com
1.888.227.2178
The pull chain controls the fan:
high, medium, low, and off.
15
M6002-01 • 06/07/12 • Casablanca Fan Company
To switch the direction of air
ow, move the reverse switch
to the opposite position.
Cleaning the fan - use soft
brushes or cloths to prevent
scratching. Cleaning products
may damage the nishes.
Troubleshooting
?
?
www.CasablancaFanCo.com
CLICK!
1.888.227.2178
ON
?
Fan doesn’t work
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 10-11.
• Check the plug connection in
the switch housing.
Excessive wobbling
• Tighten all of the blade and
blade iron screws until they
are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to balance
the fan.
16
M6002-01 • 06/07/12 • Casablanca Fan Company
CLICK!
CLICK!
Noisy Operation
• Tighten the blade and blade
iron screws until they are snug.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Loading...