CAS BI-100R, BI-100DB, BI-100D, BI-100RB Owner's Manual

BI Series

Weighing Indicator

OWNER’S MANUAL

CONTENTS

INTRODUCTION 4
CAUTIONS 4
FEATURES & MAIN FUNCTIONS 4
SPECIFICATIONS 5
PART NAME AND FUNCTION 5
SYSTEM MODE 7
GENERAL FUNCTION & DESCRIPTION 13
CONVERSION MODE 15
RS-232C COMMUNICATION 15
INSTALLING 18
USING & KEEPING 19
BATTERY 19
TEST FUNCTION 21
CALIBRATION MODE 23
SEALING & OPTIONAL DRAWING 26
ERROR MESSAGE DESCRIPTION

AND MANAGEMENT 27

INTRODUCTION

We greatly appreciate for you to purchase BI-SERIES of CAS. This
goods has the excellent performance and splendid properties through strict
test under severe quality management.
It is recommended to read this manual in full before using BI-SERIES
for good function application.

4

CAUTIONS!

Do not press the key strongly.
Do not use the inflammables at cleaning.
Do not install in the place with sudden temperature change.
Do not install in the place with high voltage and terrible electrical noises.
Do not use in the place exposed directly to the sun and including much
dust.
Do not use in the place with excessive electrical noises and shaking.
Charge a battery in full to use after negligence for a long time.
Install the platform on a flat place.

FEATURES

Simple outdoor using in use of battery
Using general (Mn, Alkaline) battery or rechargeable battery
Easy operation and various functions
SPAC Single pass automatic span calibration
Waterproof(IP65)
High precise resolution
Liquid crystal display of 5 place weight (LCD)
Using long-time battery
Various options (Wall mount, Fixed bracket, RS232)

Main functions

Weight averaging function(Hold function)
COUNT function (Unit weight setting, unit weight setting by sample)
Low/High weight comparing
Auto power OFF

TM

5

SPECIFICATION

BI-SERIES

ITEM

MODEL

LOADCELL PERMISSION
VOLTAGE

TEMPERATURE RANGE

ZERO CALIBRATION RANGE

REZERO RANGE

INITIAL ZERO RANGE

INPUT SENSITIVITY

A/ D INTERNAL RESOLUTION

A/ D EXTERNAL RESOLUTION

MAX. TARE RANGE

WEIGHT DISPLAY TYPE

CHARACTER DISPLAY

CONSUMPTION

5V DC

10 C 40 C

0.05mV 5mV

2% of Max. Capacity

20% of Max. Capacity

1 V/D more

1/ 100,000 (MAX.)

1/ 10,000 (MAX.)

Maximum capacity

5 place LCD(Char. size 23.5mm)

1.Stable ( ) 2. High, Normal, Low (HI, OK, LO)

3.Battery discharge (BAT) 4. quantity unit (PCS)

5.Weight unit (kg, lb)

Approx. 0.15W

Part name and function

Part name

Lcd Display

Loadcell

Contact output, RS232C

key

Top cover

Bottom Cover

Adapter connector

OPTIONAL

BI-100D BI-100R BI-100DB BI-100RB

DC1.5V(6EA)

Mn battery

DC1.2V(6EA)

Recharging

battery

DC12Vadapter

DC1.5V(6EA)

Mn battery

DC1.2V(6EA)

Recharging

battery

DC12Vadapter

BACK LIGHT

ZERO lamp : ON when the current weight is °∞0°±.
TARE lamp : ON when the TARE weight is saved.
GROSS weight lamp : ON at displaying the total weight.
NET weight lamp : ON at displaying the pure weight.
Hold lamp : ON at weighing the moving object.
BAT lamp : In case of rechargeable battery, display the battery

recharging time.
In case of general Mn/Alkaline battery, display the battery
replacing time.

CHARGE lamp : OFF when the charging is completed at charging

in use of adapter.

POWER lamp : ON at connecting DC 12V adapter.

lamp : ON when the current weight exceeds normal weight.
lamp : ON when the current weight is normal.

lamp : ON when the current weight is 80-90% of normal

weight

lamp: ON when the current weight is 50-80% of normal

weight

lamp: ON when the current weight is below 50% of normal

weight.

6

Display part

kg

lb

pc

s

HI

OK

LO

B A T

KEY PART

KEY FUNCTIONS

KEY:Use to power ON/OFF.

KEY:Use in case of rezero(within 2% of max. capacity)

or to enter the system mode by pressing for 2 sec.

KEY:Use at weighing in use of TARE.

KEY:Use to turn ON/OFF BACK LIGHT.(Option)

ZERO GROSS NET TARE HOLD

POWER

CHARGE

kg

lb

pcs

HI

OK

LO

HI

B A T

lb

pcs

HI

OK

kg

lb

pcs

HI

OK

LO

HI

OK

B A T

kg

lb

pcs

HI

OK

LO

HI

OK

B A T

kg

lb

pcs

HI

OK

LO

HI

OK

LO

B A T

ON/OFF

ZERO
MODE

TARE

Key functions in Simple weighing mode

& in Low/High comparing mode.

7

KEY: Use to display NET weight or GROSS weight.

KEY: Use to weigh the moving object.

(Manual, Automatic)

Key functions in COUNT mode

KEY: Use to display the unit weight.(for approx. 5 sec.)

KEY: Use to display the current weight.

(for approx. 5 sec.)

SYSTEM MODE

Simple weighing mode : Display the weight after weighing.
High/Low comparing mode : Determine that the weight is high,

normal or low value and perform the display.

Count mode : Display the quantity by setting the unit or sample

weight.

Quantity comparing mode : Perform the display after discrimination

by setting High/Low quantity.

MODE CONVERSION

Press key for 2 sec. to display the following message.

kg

LO

Execute depending on the below mode conversion and setting
method.

DIGIT INPUT METHOD

Input the digit in use of the below keys.

KEY: Use to set the inputted value to 0 .

KEY: Use to increase the first place of value by one.

NET

GROSS

HOLD

U.W.

W.

ZERO
MODE

8

KEY : Use to move the inputted value to the left by one place.
KEY: Use to input a decimal point.

KEY: Use to complete the input

Ex) For 20.5 input

DISPLAY KEY DESCRIPTION

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

ENTER

MODE

Press once
(Set to 0 )

Press twice

(Input 2 as the

first place value)

Press once
(Move to the left

by one place)

Press once

(Decimal point input)

Press five times

(Input 5 as the

first place value)

Input completion

SIMPLE WEIGHING MODE CONVERSION

DISPLAY KEY PLATFORM DESCRIPTION

Step 1

Step 2

Press once

Press once.
Generally operated

ENTER

Empty

LO

kg

ENTER

MODE

9

DISPLAY KEY PLATFORM DESCRIPTION

Step 1

Step 2

Press twice

Press once
Generally operated

ENTER

Empty

High/Low comparing mode conversion

In case of no resetting the High/Low value

In case of resetting the High/Low value

DISPLAY KEY PLATFORM DESCRIPTION

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Press twice

Press once
(Low weight input)

Refer to digit input
in page 8.

High value input

Refer to digit input
in page 8.

Generally operated

ZERO
MODE

Empty

kg

LO

kg

kg

kg

LO

10

DISPLAY KEY PLATFORM DESCRIPTION

Step 1

Step 2

Press three times

Press once.
Generally operated

ENTER

Empty

COUNT MODE CONVERSION

In case of no setting the unit/sample weight

In case of setting the unit weight

(Min. range of unit weight : Min. Division)

DISPLAY KEY PLATFORM DESCRIPTION

Step 1

Step 2

Step 3

Step 4

Step 5

Press three times

Press once

Display the set
weight

Input the unit weight

Press ‘Mode’ key to
round and display
unit weight.
Generally operated.

pcs

kg

kg

pcs

MODE

MODE

MODE

Set digit
input in
page 8.

Step 5. Ex) Min. division is 0.1
Input the unit weight as 0.532 and round off the second place of decimal to 0.5.

Empty