Cart-Tek GRX-860 User Manual
GRX-860
Electric Golf Cart
User Manual
Electric Golf Cart User Manual
Page 1 of 15
Index
1 Introduction
2 Identification – main components
3 Assembly
4 Handle and LED display
5 Operating functions and modes
6 Drive wheels
7 Use and maintenance
8 Troubleshooting
9 Safety
10 Contact details
Electric Golf Cart User Manual
Page 2 of 15
1 Introduction
Thank you for purchasing this golf cart. Please read this manual carefully before use.
After unpacking please keep the carton and all internal sections in safe storage. In the unlikely
possibility that you need to return the whole unit due to a defective component, you will need to
repack the unit in the original manner to ensure safe and secure transit.
Check all components are included in the package –
• Main cart frame.
• Drive wheels
• Battery complete with battery bag
• Battery charger
• User Manual
• Tool kit
After unpacking the cart place the battery on charge whilst you assemble the unit. The battery will
be delivered with a charge but should always be placed on charge overnight before using.
Contents of this manual cover assembly from the delivery carton – operating instructions and
conditions – maintenance – and troubleshooting. Please note that our design and manufacturing
policy is aimed at continuous improvement – this can result in changes without notice to the
specifications contained in our websites and in this manual.
Electric Golf Cart User Manual
Page 3 of 15
2
Main component identification
1
On/off switch 5 Battery 9 Front wheel assembly
2
Handle 6 Drive wheel 10 Bag support and strap
3
Up bag support 7 Wheel hub 11 Battery support
4
Central hinge lock 8 Motor/Gearbox
Electric Golf Cart User Manual
Page 4 of 15
3 Assembly
Take cart and all of component parts
out of carton
Standing at the handle end of the cart,
put the wheel marked “L” on the left
end of the axle and the wheel marked
“R”on the right end of axle. And then
slide and hold the knob on the centre
hub cap and push the wheel fully on to
the axle.
Pull up on the handle and unfold the cart.
Erect frame by unfolding and
connecting the main frame tube
together at the central hinge and locking
the Y-shape lower support structure to
the main frame with the frame lock
catch
Loading...