Cartoni P700 Users Manual
MAINTENANCE AND USER’S
MANUAL
P70 PLUS PEDESTAL
Rev. 2 – 10/2016
Rev.2 – 10/2016 1/18
END USER’S MANUAL P70 PLUS PEDESTAL
Thank you for choosing the P70 PLUS Pedestal manufactured by Cartoni S.p.A.
The P70 PLUS was designed and built using state-of-the-art technologies and procedures in
order to guarantee the maximum reliability over time, as well as total safety for its users.
In order to properly and safely use the P70 PLUS Pedestal read this manual very
carefully and follow the instructions.
All back-up material, and this manual in particular, should be stored in a safe place
for future reference.
CARTONI S.P.A.
VIA GIUSEPPE MIRRI, 13
ROMA – ITALIA
00159
TEL. 064382002 – FAX 0643588293
MAILTO:CARTONI@CARTONI.COM
WWW.CARTONI.COM
Cartoni S.p.A. — All rights reserved
Rev.2 – 10/2016 2/18
END USER’S MANUAL P70 PLUS PEDESTAL
This publication may not be reproduced in full or in part, or memorised, transmitted
or translated into any common or computer language, in any form or by any
electronic, mechanical, magnetic, optical, chemical, manual or other means without
the express authorisation in writing of Cartoni S.p.A.
Cartoni SpA holds the right to revise or change this publication without any prior
advice to any person or organization.
Rev.2 – 10/2016 3/18
END USER’S MANUAL P70 PLUS PEDESTAL
CONTENTS
1. PREFACE 5
1.1. FURTHER INFORMATION .................................................................................................................................. 5
1.2. W
1.3. A
1.4. R
2. TRANSPORTATION AND UTILISATION ENVIRONMENT 7
2.1. TRANSPORTATION AND HANDLING ................................................................................................................... 7
2.2. S
2.3. F
2.4. O
2.5. A
2.6. D
3. TECHNICAL SPECIFICATIONS 10
3.1. TECHNICAL SPECIFICATIONS ......................................................................................................................... 10
3.2. S
3.3. N
3.4. I
4. DESCRIPTION 11
ARRANTY .................................................................................................................................................. 5
UTHORIZED PERSONNEL .............................................................................................................................. 5
EGULATIONS AND RELEVANT DOCUMENTATION ............................................................................................... 6
TORAGE ..................................................................................................................................................... 7
LOORING .................................................................................................................................................... 7
PERATING CONDITIONS ................................................................................................................................ 8
SSEMBLY .................................................................................................................................................... 8
ISASSEMBLING ............................................................................................................................................ 9
PECIFICATION S OF P50 FITMENTS ............................................................................................................... 10
OISE …………………………………………………………………………………………………..…………..10
DENTIFICATION PLATE. ................................................................................................................................. 10
5. USE INSTRUCTIONS 12
5.1. PRESSURISING THE PEDESTAL ...................................................................................................................... 12
5.2. M
OUNTING THE CAMERA ............................................................................................................................... 14
5.3. C
AMERA HEIGHT ADJUSTMENT ..................................................................................................................... 14
5.4. M
OVING THE PEDESTAL ............................................................................................................................... 14
5.5. L
OCKING THE WHEELS ................................................................................................................................. 14
6. SAFETY SYSTEMS 15
6.1. WHEEL GUARDS ......................................................................................................................................... 15
6.2. P
RESSURE VALVE ....................................................................................................................................... 15
6.3. R
EBOUND CONTROL .................................................................................................................................... 15
7. IMPROPER USE 16
7.1. HANDLING .................................................................................................................................................. 16
7.2. O
PERATOR POSITION ................................................................................................................................... 16
7.3. P
EDESTAL STABILITY ................................................................................................................................... 16
7.4. P
ROPER USE .............................................................................................................................................. 16
8. MAINTENANCE 17
8.1. STANDARD MAINTENANCE ............................................................................................................................ 17
8.1.1. C
8.1.2. P
8.2. R
8.3. S
LEANING ....................................................................................................................................... 17
ERIODIC INSPECTION ...................................................................................................................... 17
EPAIRS ..................................................................................................................................................... 17
PARE PARTS ............................................................................................................................................. 17
9. DECOMMISSIONING 18
Rev.2 – 10/2016 4/18
END USER’S MANUAL P70 PLUS PEDESTAL
1. PREFACE
The present manual relates to the camera
support P70 PLUS Pedestal.
The Pedestal can only operate properly
and safely if it is used exactly as prescribed
in the present manual and in the other documentation relevant to the P70 PLUS Pedestal.
It is therefore essential to read all the said
documentation carefully and to keep it in a
safe place.
Always make sure that anyone required to
operate the pedestal has fully understood all
instructions and regulations governing its use
as well as all the symbols and controls on the
machine.
Although the equipment features safety
devices, not all the risks inherent its improper use can be avoided. Cartoni S.p.A
therefore accepts no responsibility for damage to persons or property deriving from improper use of the equipment.
The warranty covers replacement of any
defective parts and the labour required for
the purpose; it is the client’s responsibility to
bring any product requiring repair to the Car-
toni S.p.A. factory office in Rome or to a
Cartoni authorized service centre.
If it is merely a matter of replacing individual components, these will be supplied
free of charge from the Cartoni S.p.A. factory. Transport costs will be charged to the
client. The present warranty is only valid if
the pedestal has been properly used in accordance with the manufacturer’s instructions
and has not been mishandled. Cartoni S.p.A
immediately invalidates the warranty if
modifications and/or repairs are carried out
by persons not authorised to do so.
Components subject to wear and tear are
not covered by the warranty.
The warranty is also invalidated by one of
the following:
failure t o comply with payment condi-
tions;
failure to c arry out appropriate main-
tenance;
WARNING! Do not remove or erase
any label, indication or warning affixed to the Pedestal.
WARNING! Any modification to the
pedestal and/or its accessories require
prior authorisation by Cartoni S.p.A.
1.1. FURTHER INFORMATION
For a more detailed description of the
components please refer to the exploded
views of the equipment available from Cartoni S.p.A. and its authorized resellers.
1.2. WARRANTY
The P70 PLUS Pedestal is covered by a
warranty against manufacturing defects for 5
years from the date of shipment (three years
basic warranty + two years upon online registration to www.cartoni.com).
removal or mistreatment of plates
and/or labels containing data and technical specifications.
The warranty absolves Cartoni S.p.A. of
all responsibility for any direct or indirect
damage deriving from the equipment malfunction.
Cartoni S.p.A. accepts no responsibility
for damage to the pedestal caused by improper use or the malfunction of other
equipment connected to the camera support.
The warranty only covers the Pedestal
damage and/or malfunction and does not entitle the Purchaser to claim any damages for
loss of production time due to assumed or
proven damage caused by and/or connected
to the pedestal itself.
The present warranty forms an integral
part of the sales contract and is included into
the selling price of the machine.
Rev.2 – 10/2016 5/18
END USER’S MANUAL P70 PLUS PEDESTAL
Presidential Decree 17/2010 of
1.3. AUTHORIZED PERSONNEL
Extraordinary maintenance and repairs to
the pedestal can only be carried out by competent persons who are either employed or
authorised by Cartoni S.p.A.
Information regarding repair/maintenance
can be obtained by Cartoni website
www.cartoni.com.
1.4. REGULATIONS AND RELEVANT DOCUMENTATION
The design and construction of the ma-
27/01/2010: regulation implementing
EU Directive 2006/42/CE and subsequent amendments (Italian implementation of the Machine Directive)
UNI EN ISO 12100:2010 - Safety of
machinery – General principles for design – Risk assessment and risk reduction
UNI EN ISO 13857:2008 - Safety of
machinery – Safety distances to prevent hazard zones being reached by
upper and lower limbs
chine comply with the regulations listed below:
EU Directive 2006/42/CE covering the
harmonisation of member States’ laws
on machinery (Machine Directive)
Rev.2 – 10/2016 6/18
Loading...