Cartft CTFCAM-1 Series Quick Operation Manual

IP HD DOME CAMERA

QUICK OPERATION GUIDE

1. How to modify the IP address of PTZ

Current there is two method on modifying PTZ IP address: one via website;

another one via search tools.

Modify the PTZ IP address via IE website

1.1 set the computer network for connection testing

The PTZ camera default IP address is 192.168.1.18 ,so need to set the computer IP 1 address

in the same segment. Put the mouse on the computer desktop "network" icon,

press the right mouse button to click on the "properties" then you can open”the

network and sharing center”, then click “local connection”, click “properties” in the

pop-up dialog box (general),and then double-click the “Inter protocol version 4

(tcp/IPV4)”in the pop-up dialog box (Network). Last select "use the following IP

address” to configure a 0 segment of the IP.

0
1

0
3

0
2

0
6

0
5

1.2 IE login

Open the IE browser, in the tools / security / custom level (C)... make the"ActiveX

control and interpolation"all select "enable" or "tip", also make the security level to low.

01

02

Input the network PTZ IP address

(factory Default IP address:

192.168.1.18) then click”Enter”, which

02

03

will appear the browser landing interface.

In the login interface input the network

user name(default: admin) and pass

word(default: admin) then

click [log].

After the first time to enter the login

interface, it will appear”Click here to

download the plugin, please close the

browser when installation”tip as the follow

diagram,click to install the plugin. Last click

to download the controls : install and run

You can view the real time video by refreshing the website after the

installation finished.

this controls once it was downloaded.

1.3 modified IP

Then enter the settings - network -network, you can modify the PTZ IP address as

below picture: