Carter-Hoffmann BB1000, BB1200 General Manual

SPECIFICATIONS
Printed in U.S.A. B15 0811
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
BB1000 & BB1200
CONVERTIBLE BANQUET CARTERS
for Pre-plated Banquet Meals, Trays and Pans
CONSTRUCTION...Completely welded
CABINET MATERIAL...All stainless steel construction; 20 gauge polished exterior and 24 gauge interior.
BASE FRAME...12 gauge stainless steel full depth caster bolsters with 14 gauge stainless steel channels welded to bolsters.
CASTERS...6” diameter, industrial grade caster with polyurethane tread. Sealed roller axle bearing and double ball bearing swivel. Plate mounted and bolted to base in offset “wheel ahead” pattern. Two casters fitted with brakes.
BUMPER...Non-marking gray vinyl bumper set in heavy-duty 3/16” thick extruded aluminum frame with reinforced corner cutouts.
INSULATION...1” thick high density continuous wrap-around type fiberglass insulation in walls, door and top.
GASKET...High temperature silicone gasket mounted to cabinet.
DOOR...Welded double panel stainless steel door. Filled with 1” thick fiberglass insulation. Decorative red vinyl door stripe.
HINGES...Concealed stainless steel hinges with 5/16” pin.
PUSH HANDLES... Two horizontal 1” diameter stainless steel tubular handles bolted to cabinet.
LATCHES...Flush mounted heavy-duty sliding latch with exclusive grip handle.
SHELVES...Welded, duplex nickel-plated removable wire shelves.
OPTIONAL PAN/TRAY RACK ASSEMBLIES... Removable stainless
steel tray rack assemblies for 12”x20” or GN 2/1 pans. One pair per door.
THERMOMETER...Dial type with remote sensing bulb and sensing bulb protector. Mounted to mullion.
CANNED FUEL DRAWERS... Two canned fuel drawers slide out for easy access. Each with latch for secure closure during transport.
HEATING SYSTEM...Bottom mounted heater. Stainless steel construction. Removable without tools. 1600 watt inconel-sheathed heating element. High impedence protected, internally cooled fan motor. Full range thermostat and power indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single phase, 1650 watts, 13.7 amps. Ten foot rubber cord with 3 prong grounding plug. NEMA 5-15P.
PERFORMANCE...Capable of heating to 200OF (94OC). Preheat to 160OF (71OC) in approximately 25 minutes.
ACCESSORIES/OPTIONS...
Stainless steel tray racks for GN and 12”x20” pans Top mounted transport latch Locking paddle latch Menu card holder Lexan thermometer cover 4 wheel brakes Alternate caster sizes and types Alternate electrical configurations Passive humidity pan Cold plate Covered plate “C” carriers
Model Capacity Clearance Shelf Overall Dimensions Caster Shipping
Number
Plates* **Slides **Slides Number Between Size Height Depth Width Diameter Weight
up to for for GN 1/1 of Shelves in
12.75” dia. GN 2/1 12”x20” Shelves in (mm) (mm) in mm in mm in mm in mm lbs kg
BB1000 96 13 26 6 14
5
/16(364) 273/4x 22 59 1499 321/2826 641/41632 6 152 575 261
per door per door 3 per door (705 x 559)
BB1200 120 17 34 6 17
5
/8(448) 273/4x 22 70 1778 321/2826 641/41632 6 152 646 294
per door per door 3 per door (705 x 559)
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
BB1000
FOOD SERVICE EQUIPMENT
HEATED SERVERS
CARTER-HOFFMANN
NSF/ANSI 4
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Specifications subject to change through product improvement & innovation.
BB1000
Front View
* Plate capacity with or without optional carriers. Capacity depends on stacked height of plate with cover (see “Clearance Between Shelves”). Maximum cover diameter 12.75” (324mm). Carriers not availabile with BB1200. ** Optional tray slides may be used in lieu of shelves (see accessories/options)
BB1200
Front View
BB1000 & BB1200
Top View
BB1000 & BB1200
CONVERTIBLE BANQUET CARTERS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED TURNED-IN SEAM CONSTRUCTION... Adds rigidity and stregth to entire
cabinet for long life and eliminates raw edges for ease of cleaning and safety.
POLYURETHANE TREAD CASTERS WITH SEALED ROLLER BEARING...
Long lasting and easy rolling for maximum load and minimum maintenance.
HIGH PERFORMANCE HEATER... Blower system for
fast heat up, recovery and even heat distribution throughout cabinet. Unit is removable without tools for easy cleaning.
OPTIONAL STAINLESS STEEL TRAY SLIDES...
cart is convertible, in minutes, to hold Gastronorm 1/1 or 12”x20”x2.5”, or Gastronorm 2/1 pans
(specify pan size when ordering)
HEAVY-DUTY NON-MARKING BUMPER... Set in 3/16” thick extruded aluminum frame with reinforced corner cut-outs. Protects doorways, walls and cart from damage.
OFFSET “WHEEL AHEAD” PATTERN... Only one wheel can pass
over uneven surfaces at a time for easy handling and steering.
FLUSH-MOUNTED SLIDING DOOR LATCH WITH GRIP HANDLE... Designed for
transport applications. Door remains closed during transport. Flush design protects cart from damage.
HEAVY-DUTY STAINLESS STEEL BASE FRAME... 12 gauge caster bolsters with 1”x1” stainless steel perimeter frame for rugged use and added durability.
DOUBLE WALL STAINLESS STEEL CABINET...
Strongest, most durable materials for long life. High density fiberglass for maximum heat retention.
NSF/ANSI 4
BB1000
DOUBLE DOOR ACCESS... For heat efficient loading
and unloading.
CONCEALED STAINLESS STEEL HINGE WITH 5/16” PIN...
Keeps doors properly aligned and withstands rugged use.