Carter-Hoffmann BB100 General Manual
SPECIFICATIONS
Printed in U.S.A. B45 0911
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
BB100
CONVERTIBLE BANQUET CARTER
for Pre-plated Banquet Meals, Trays and Pans
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
formed and welded to base. All seams
turned in to eliminate raw edges.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior
and 24 gauge interior.
BASE FRAME...12 gauge stainless steel
full depth caster bolsters with 14 gauge
1” x 1” stainless steel perimeter channel
supports welded to bolsters.
CASTERS...6” diameter, industrial grade
caster with polyurethane tread. Sealed
roller axle bearing and double ball
bearing swivel. Plate mounted and
bolted to base in offset “wheel ahead”
pattern. Two casters fitted with brakes.
BUMPER...Non-marking gray vinyl
bumper set in heavy-duty 3/16” thick
extruded aluminum frame with reinforced
corner cutouts.
INSULATION...1” thick high density
continuous wrap-around type fiberglass
insulation in walls, door and top.
GASKET...High temperature silicone
gasket mounted to cabinet.
DOOR...Welded double panel stainless
steel door. Filled with 1” thick fiberglass
insulation. Decorative red vinyl door
stripe.
HINGES...Concealed stainless steel
hinges with 5/16” pin.
PUSH HANDLES... Two horizontal 1”
diameter stainless steel tubular handles
bolted to cabinet.
LATCH...Flush mounted heavy-duty
sliding latch with exclusive grip handle.
SHELVES...Welded, duplex nickel-plated
removable wire shelves.
OPTIONAL PAN/TRAY RACK
ASSEMBLIES... Optional stainless steel
tray slide assemblies are interchangeable
with wire shelves. Tray capacities are: 15
18”x26” (G/N 2/1) pans or 30 12”x20”
(G/N 1/1) pans.
THERMOMETER...Dial type with remote
sensing bulb and sensing bulb protector.
Mounted to mullion.
HEATING SYSTEM...Bottom mounted
heater. Stainless steel construction.
Removable without tools. 1600 watt
inconel-sheathed heating element. High
impedence protected, internally cooled
fan motor with long life bearings. Full
range thermostat & power indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1650 watts, 13.7 amps. Ten foot
rubber cord with 3 prong grounding plug.
NEMA 5-15P.
PERFORMANCE...Capable of heating to
200OF (94OC). Preheat to 160OF (71OC)
in approximately 25 minutes.
ACCESSORIES/OPTIONS...
Optional stainless steel tray racks
Top mounted transport latch
Locking paddle latch
Menu card holder
Lexan thermometer cover
4 wheel brakes
Alternate caster sizes and types
Alternate electrical configurations
Passive humidity pan
Cold plate
Plate carriers: specify covered “C”
type or open “P” type
Model Capacity Clearance Shelf Overall Dimensions Caster Shipping
Number
Plates Covered **Tray Slides Number Between Size Height Depth Width Diameter Weight
in “P” Plates (optional) of Shelves in
carriers Shelves in (mm) (mm) in mm in mm in mm in mm lbs kg
BB100
96 Plates 96 to 120* 15 pair at 4 13 (330) 23 x 22
9
/16691/21765 34 863 641/41632 6 152 378 172
in 12 (8P) with/without 3.5” (87mm)
(840 x 673)
carriers
12 (8C) carriers spacing
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
BB100
FOOD SERVICE EQUIPMENT
HEATED SERVERS
CARTER-HOFFMANN
NSF/ANSI 4
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Specifications subject to change through product improvement & innovation.
BB100
Front View
* Requires shallow dome and plate. See “Clearance Between Shelves.”
** Optional tray slides may be used in lieu of shelves (see accessories/options)
BB100
Top View
BB100
CONVERTIBLE BANQUET CARTER
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED TURNED-IN SEAM
CONSTRUCTION... Adds rigidity and stregth to entire
cabinet for long life and eliminates raw edges for ease of
cleaning and safety.
POLYURETHANE TREAD CASTERS
WITH SEALED ROLLER BEARING...
Long lasting and easy rolling for
maximum load and minimum
maintenance.
HIGH PERFORMANCE
HEATER... Blower system for
fast heat up, recovery and
even heat distribution
throughout cabinet. Unit is
removable without tools for
easy cleaning.
HEAVY-DUTY NON-MARKING BUMPER... Set in 3/16”
thick extruded aluminum frame with reinforced corner
cut-outs. Protects doorways, walls and cart from
damage.
OFFSET “WHEEL AHEAD”
PATTERN... Only one wheel can pass
over uneven surfaces at a time for easy
handling and steering.
FLUSH-MOUNTED SLIDING
DOOR LATCH WITH GRIP
HANDLE... Designed for
transport applications. Door
remains closed during
transport. Flush design
protects cart from damage.
HEAVY-DUTY STAINLESS STEEL BASE FRAME... 12
gauge caster bolsters with 1”x1” stainless steel perimeter
frame for rugged use and added durability.
DOUBLE WALL STAINLESS STEEL CABINET...
Strongest, most durable materials for long life. High
density fiberglass insulation for maximum heat retention.
NSF/ANSI 4
BB100
CONCEALED
STAINLESS STEEL
HINGE WITH 5/16” PIN...
Keeps doors properly
aligned and withstands
rugged use.
Loading...