Carter Hoffman TN1S, TN1S12 User Manual
SPECIFICATIONS
Printed in U.S.A. L09 0609
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
TN1S SERIES
ENCLOSED MOBILE TRAY CARTS
One Door, One Tray Per Slide
(end-loaded, two slide sets per door)
CONSTRUCTION...Completely welded
cabinet construction. Cabinet formed and
welded to base. All seams turned in to
eliminate raw edges.
CABINET MATERIAL...Nickel-bearing
type 300 series stainless steel; 18 gauge
polished exterior walls.
BASE FRAME...12 gauge stainless steel
full depth bolsters with 1” x 1” stainless
steel perimeter channel supports.
CASTERS...6” diameter, institutional
grade caster with polyurethane tread.
Sealed roller bearing and double ball
bearing swivel with Zerk grease fittings.
Plate mounted and bolted to base in
offset wheel ahead pattern.
BUMPER...Non-marking gray vinyl
bumper set in heavy-duty 3/16” extruded
aluminum frame with reinforced corner
cut-outs.
DOORS...Double panel welded stainless
steel doors. Cavity filled with with high
density fiberglass insulation.
LATCHES...Flush mounted heavy duty
slide latch for positive closing of doors.
HINGES...Concealed, all stainless steel
hinges permit 270 degree door operation.
HANDLES...Tubular stainless steel
handle mounted on swivel end of cabinet.
TRA Y RACK ASSEMBLIES...Complete
assemblies are removable without tools
and constructed of 18 gauge stainless
steel. (SAMPLE TRAY REQUIRED WITH
ORDER)
TRAY SLIDES...One 12” wide tray per
slide (up to 22” length), end loaded. Two
slide assembly pairs.
VENTS...Louvered vents on both ends to
allow escape of excessive heat and
moisture.
ACCESSORIES/OPTIONS...
Cart wash package
Polyurethane tread casters
Semi-pneumatic casters
Full pneumatic casters
Alternate caster sizes
Wheel brakes
Drain and plug
Extra stainless steel push handle
3 or 4 sided top rail
Menu card holder
Top mounted transport latch
Pass through door
All swivel casters
Vinyl covered top or door stripe
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Tray Capacity Inside Working Overall Dimensions Caster Shipping
Number 12” wide trays Height Height Depth Width Diameter Weight
Capacity Spacing in mm in mm in mm in mm in mm lbs kgs
TN1S10 10 5
1
/4 301/2 775 423/4 1086 28 711 351/2 902 6 152 220 100
TN1S12 12 4
3
/4 301/2 775 423/4 1086 28 711 351/2 902 6 152 220 100
TN1S14 14 4
1
/4 301/2 775 423/4 1086 28 711 351/2 902 6 152 220 100
TN1S16 16 4
3
/4 39 991 491/16 1246 28 711 351/2 902 6 152 238 108
TN1S18 16 4
1
/4 39 991 491/16 1246 28 711 351/2 902 6 152 238 108
TN1S14
Carter-Hoffmann C.A.D. Drawing Scale: 1/4” = 1’
End-loaded tray
configuration
Top View
All Models
Front View
TN1S10, TN1S12 &
TN1S14
Front View
TN1S16 &
TN1S18
FOOD SERVICE EQUIPMENT
ENCLOSED MOBILE TRAYCARTS
CARTER-HOFFMANN
TN1S SERIES
ENCLOSED MOBILE TRAY CARTS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED, ALL
STAINLESS STEEL, TURNEDIN SEAM CONSTRUCTION...
Corrosion-resistant 300 series
stainless steel; easy to clean
and structurally sound for long
life.
6” DIAMETER INDUSTRIAL GRADE CASTERS NON-MARKING GRAY RUBBER TREAD...
Rust resistant Delrin bearings with all axles and raceways equipped with Zerk grease fittings.
Long lasting and easy rolling, yet durable enough to withstand rigorous cart wash programs.
Two fixed and two swivel casters for easy maneuvering.
WHEEL-AHEAD CASTER CONFIGURATION...
Mounted to base in offset wheel-ahead pattern
for easy rolling over uneven surfaces. Allow for
easy handling and steering.
NON-MARKING BUMPER SET IN HEAVY-DUTY
3/16” EXTRUDED ALUMINUM FRAME... Floating
style, bolted to the base. Protects cart and
contents from impacts; protects doorways and
walls from damage.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bolsters with
perimeter frame for rugged use
and added durability.
TN1S14
VENTED END PANELS...
Allow excess heat and moisture
build-up to escape, while
maintaining highest food quality.
STAINLESS STEEL HINGES...
Heavy-duty, 12 gauge hinges
with 3/8” diamater pin for
trouble-free door operation. 270
degree door swing.
FLUSH MOUNTED SLIDING
DOOR LATCH & ADJUSTABLE
DOOR STRIKE... Designed
specifically for tray cart operation
for positive door closure during
transport. Full length door stop is
formed into the cabinet so doors
can’t cave in, even when closed
with force.
Loading...