SPECIFICATIONS
Printed in U.S.A. L15 0413
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
TE2S & TE3S SERIES
ENCLOSED MOBILE TRAY CARTS
Two and Three Door, One Tray Per Slide
(end-loaded)
CONSTRUCTION...Completely welded
cabinet construction. Cabinet formed and
welded to base. All seams turned in to
eliminate raw edges.
VENTS...Louvered vents on both ends to
allow escape of excess heat and
moisture.
CABINET MATERIAL...Nickel-bearing
type 300 series stainless steel; 18 gauge
polished exterior walls.
BASE FRAME...12 gauge stainless steel
full depth bolsters with 1” x 1” stainless
steel perimeter channel supports.
CASTERS...6” diameter, institutional
grade caster with polyurethane tread.
Sealed roller bearing and double ball
bearing swivel with Zerk grease fittings.
Plate mounted and bolted to base in
offset wheel ahead pattern. Two swivel
and two rigid
BUMPER...Non-marking gray vinyl
bumper set in heavy-duty 3/16” extruded
aluminum frame with reinforced corner
cut-outs.
DOORS...Double panel welded stainless
steel doors. Center hung for 180 degree
door swing. Cavity filled with with 1” thick
high density fiberglass insulation.
LATCHES...Flush mounted heavy duty
slide latch with adjustable door strike for
positive closing of doors.
HINGES...Concealed, 12 gauge all
stainless steel hinges with 3/8” pin.
PUSH HANDLE... 1” diameter tubular
stainless steel handle mounted on end or
top, depending on model. Mounted to
swivel end of cabinet. Push handle
extends the full depth of the cabinet.
TRAY RACK ASSEMBLIES...Complete
assemblies are removable without tools
and constructed of 18 gauge stainless
steel.
TRAY SLIDES...One 16” x 22”, 15” x 20”,
or 14” x 18” tray per slide, end-loaded.
Tray size must be specified when
ordered. SAMPLE TRAY REQUIRED.
ACCESSORIES/OPTIONS...
Polyurethane tread casters
Semi-pneumatic casters
Full pneumatic casters
Alternate caster sizes
Six-wheel caster configuration
Wheel brakes (swivel wheels only)
Floor drain and plug
Extra stainless steel push handle
3 or 4 sided top rail
Menu card holder
Top mounted transport latch
Trailer hitch
Pass through doors
Vinyl covered top and/or door stripe
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Tray Capacity* Inside Working Overall Dimensions Caster Shipping
Number 16x22, 15x20 or 14x18 Height Height Depth Width Diameter Weight
Vertical Spacing (specify)
3.75” 4.5” 5.25” 6” in mm in mm in mm in mm in mm lbs kgs
TE2S12 16 14 12 10 32
1
/2 826 423/8** 1076** 295/8 752 441/4 1124 6 152 212 96
TE2S16 22 18 16 14 43 1092 52
7
/8 1343 295/8 752 441/4 1124 6 152 226 103
TE2S20 28 22 20 16 53
1
/2 1359 633/8 1086 295/8 752 441/4 1124 6 152 279 127
TE3S24 33 27 24 21 43 1092 49
1
/16 1610 295/8 752 631/2 1613 6 152 288 131
TE3S30 42 33 30 24 53
1
/2 1359 633/8 1086 295/8 752 631/2 1613 6 152 352 160
TE2S16
Carter-Hoffmann C.A.D. Drawing Scale: 1/4” = 1’
FOOD SERVICE EQUIPMENT
ENCLOSED MOBILE TRAY CARTS
CARTER-HOFFMANN
*Specify tray size. SAMPLE TRAY REQUIRED WITH ORDER.
**Add 2-1/8” (54mm) to height of cart for top-mounted push handle.
Top View
Top View Top View
TE2S12
Front View
TE2S16
Front View
TE3S24
Front View
TE2S & TE3S SERIES
ENCLOSED MOBILE TRAY CARTS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED, ALL
STAINLESS STEEL, TURNEDIN SEAM CONSTRUCTION...
Corrosion-resistant 300 series
stainless steel; easy to clean
and structurally sound for long
life.
6” DIAMETER INDUSTRIAL GRADE CASTERS NON-MARKING GRAY RUBBER TREAD...
Rust resistant Delrin bearings with all axles and raceways equipped with Zerk grease fittings.
Long lasting and easy rolling, yet durable enough to withstand rigorous cart wash programs.
Two fixed and two swivel casters for easy maneuvering.
WHEEL-AHEAD CASTER CONFIGURATION...
Mounted to base in offset wheel-ahead pattern
for easy rolling over uneven surfaces. Allow for
easy handling and steering.
NON-MARKING BUMPER SET IN HEAVY-DUTY
3/16” EXTRUDED ALUMINUM FRAME... Floating
style, bolted to the base. Protects cart and
contents from impacts; protects doorways and
walls from damage.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bolsters with
perimeter frame for rugged use
and added durability.
TE3S24
VENTED END PANELS...
Allow excess heat and moisture
build-up to escape, while
maintaining highest food quality.
STAINLESS STEEL HINGES...
Heavy-duty, 12 gauge hinges
with 3/8” diameter pin for
trouble-free door operation. 270
degree door swing.
FLUSH MOUNTED SLIDING
DOOR LATCH & ADJUSTABLE
DOOR STRIKE... Designed
specifically for tray cart operation
for positive door closure during
transport. Full length door stop is
formed into the cabinet so doors
can’t cave in, even when closed
with force.
Loading...