Carter Hoffman SR1820 User Manual
SPECIFICATIONS
Printed in U.S.A. F33 09612
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
SR188 & SR1820
ENDURAHEAT
TM
SATELLITE TRANSPORT CARTS
Heat Retention Carts for Bulk Food
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
formed and welded to base. All seams
turned in to eliminate raw edges.
CABINET MATERIAL...All stainless steel;
polished exterior.
BASE FRAME...12 gauge stainless steel
extended full depth bolsters.
CASTERS... 6” balloon casters. Plate
mounted and bolted to base in offset
wheel-ahead pattern. Delrin sleeve axle
bearings and double ball bearing swivel.
Zerk grease fittings. Two casters fitted
with brakes.
BUMPER...Non-marking grey vinyl
bumper set in heavy-duty 3/16” thick
extruded aluminum frame with reinforced
corner “cut-outs.”
INSULATION...High density fiberglass,
full 2” thick continuous wrap-around type
in top and sides.
THERMOMETER...Dial type with remote
sensing bulb.
DOOR...Recessed within cart walls, top
and base. Welded double panel stainless
steel pocket door. Polished exterior.
Filled with 2” thick high density fiberglass
insulation. Large curved door handle for
easy grasp.
HINGES...12 gauge stainless steel strap
hinges with 3/8” diameter stainless steel
pins, fully welded to cabinet and doors.
DOOR CLOSURE...Pocket-style door
with magnetic closure. Gasketless
design with side mount transport latch
with padlock provision.
HANDLES...SR188: Two 1” stainless
steel horizontal tubular handles mounted
to sides of cabinet on top edge. SR1820:
Four 1” stainless steel tubular handles.
Two vertically mounted and bolted with
backup plates to each side of the cabinet.
RACK ASSEMBLIES... Removable solid
stainless steel universal slides placed into
18 gauge stainless steel baffles. Tray
slides fully adjustable at 1 3/4” spacing.
Standard spacing at 3 1/2” centers.
HEATING SYSTEM... 1500 watt blower
heater. Patented solid to solid phase
change heat retention material located in
floor of cabinet. High impedance
protected, internally cooled fan motor.
Auto reset high-limit switch to protect all
internal electrical components. Recessed
control panel. Three-position toggle
switch with off, convection & EnduraHeat
settings. Power indicating light,
EnduraHeat charge ready light, full range
thermostat control knob.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1500 watts, 12.5 amps. Ten foot
3 wire rubber cord with 3 prong
grounding plug. NEMA 5-20P.
PERFORMANCE...Capable of heating to
200OF (94OC). Convection preheat to
160OF (71OC) in approximately 20
minutes. EnduraHeat mode
charge/preheat time in approximately one
hour.
ACCESSORIES/OPTIONS...
Alternate caster sizes and types
Four wheel brakes
Menu card holder (5”x7” or 8.5”x11”)
6” extended width tray slides
Alternate electrical configuration
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
Tel (847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Tray/Pan Slide Inside Working Overall Dimensions Caster Shipping
Number Capacity* Pairs Height Height Depth Width Diameter Weight
18”x26” 12”x20” Standard in mm in mm in mm in mm in mm lbs kgs
SR188 6 12 6 23
1
/2 597 451/2 1156 35 889 313/4 806 6 152 285 130
SR1820 12 24 12 45
3
/4 1162 671/2 1715 35 889 313/4 806 6 152 440 200
* Capacity shown at 3 1/2” spacing. Tray slides adjustable on 1 3/4” increments.
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
FOOD SERVICE EQUIPMENT
HEATED TRANSPORTCARTS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation.
SR1820
SR188
Front View
SR1820
Front View
SR188
Side View
SR1820
Side View
SR188 &
SR1820
Top View
US Patent Nos.
7,102,103 B2 &
7,394,042 B2
SR188 & SR1820
ENDURAHEAT
TM
TRANSPORT CARTS
Since 1947, Foodservice Equipment That Delivers!
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
ENDURAHEAT HEAT
RETENTION SYSTEM...
Blower system for fast heat
up, recovery and even heat
distribution throughout
cabinet. One hour
EnduraHeat charge/preheat
time. Flexible system can be
operated in convection or
EnduraHeat mode. Once
charged, EnduraHeat system
will maintain serve safe
temperatures for two hours.
EnduraHeat module can be
removed to make cart
cleaning easy.
RECESSED DOOR... Flush
mounted design protects door
from damage & coming out of
alignment during transport.
Gasketless for low
maintenance.
STAINLESS STEEL
CONSTRUCTION...All stainless
steel construction. Designed to
withstand the abuse of transport
applications and is easy to
clean.
HANDLES... Stainless steel
tubular handles bolted to all four
corners for easy maneuvering.
Allow secure tie-down support
for easy transport.
REMOVABLE STAINLESS
STEEL TRAY SLIDE
ASSEMBLIES...Baffles and
slides can be removed without
tools for easy cleaning and
adjusting pan spacing.
FULL PERIMETER
BUMPER... Heavy-duty wrap-
around aluminum bumper with
grey vinyl insert. Protects
entire cart and facility walls
from damage.
EASY ROLLING BALLOON
CASTERS IN OFFSET
WHEEL AHEAD PATTERN...
Only one wheel can pass over
uneven surfaces at one time.
Cabinet glides easily across
grates, thresholds and truck lift
gates.
SR1820
SR1820
HEAVY-DUTY HINGES...
Stainless steel strap hinges
with 3/8” stainless steel pins,
bolted and welded to door and
cabinet, with back-up plates
withstand abuse of transport.
Loading...