Carter Hoffman RTH12 User Manual
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
SPECIFICATIONS
Printed in U.S.A. H10 0911
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
RTH6, RTH9, RTH12, RTH18
CORRECTIONAL RETHERMALIZATION CABINETS
(18”x26” wire baskets)
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
formed to base and welded. All seams
turned in to eliminate raw edges.
Exposed fasteners tamper resistant.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior
and 20 gauge interior.
BASE FRAME...12 gauge stainless steel
full depth caster bolsters with 14 gauge
stainless steel perimeter supports welded
to bolsters.
INSULATION...High density fiberglass,
full 2” thick continuous wrap-around type
in top, bottom and sides.
DOOR...Non-removable welded double
panel stainless steel. 20 gauge polished
exterior and 20 gauge interior. Filled with
2” thick high density fiberglass insulation.
270 degree door swing.
HINGES...12 gauge stainless steel strap
hinges with 3/8” diameter stainless steel
pins, fully welded and bolted to cabinet
and doors.
LATCH...Heavy-duty edge mount latch
with magnetic catch.
CASTERS...5” diameter, industrial grade
casters with polyurethane tread. Delrin
sleeve axle bearing and double ball
bearing swivel. Zerk grease fittings. Plate
mounted and bolted to base. Two
casters fitted with brakes.
BASKET RACK ASSEMBLIES...
Removable18 gauge stainless steel racks
with welded stainless steel angle slides.
Hang on shoulder bolts.
BASKET SPECIFICATIONS... Designed
to accommodate 18”x26” wire baskets.
One basket per slide, end-loaded. Will
also accommodate 18”x26” sheet pans,
one per slide, end-loaded. BASKETS
SOLD SEPARATELY.
CONTROLLER...Solid state electronic
controller with digital display.
Programmable to store up to 10 four-step
heat/hold cycles. Factory preset for four
standard rethermalization modes and one
hold mode. Field programmable.
HEATING SYSTEM...Top mounted heater
secured in place with tamper-resistant
screws. Inconel-sheathed heating
elements. High impedance protected,
internally cooled fan motor. Precision
engineered interior heat duct system.
ELECTRICAL OPTIONS...
RTH6, RTH9 & RTH12
RTH18
PERFORMANCE...Capable of heating
from 700F. (210C.) to 2000F. (900C.) in five
minutes with a differential of + or - 2.5
0
F.
Recovery from 120
0
F (490C) to 2000F
(900C) in one minute (performance based
on empty cabinet.
ACCESSORIES/OPTIONS...
Alternate caster sizes & types
Alternate electrical configurations
18” x 26” stainless steel wire baskets
Pre-programmed menu settings.
Submit menu with order.
Polycarbonate control cover
Locking control cover
Stainless steel basket dolly
Transport cart/roll-in cassette rack
system (RTH6, RTH9, RTH12 only)
Locking door latches
Model Basket Basket Inside Working Overall Dimensions Caster Shipping
Number Capacity Spacing Height Height Depth Width Diameter Weight
18” x 26” in mm in mm in mm in mm in mm in mm lbs kgs
RTH6 6 3 76 18
1
/
8 460 41
1
/
8 1045 40
1
/
8 1019 24 610 5 127 288 131
RTH9 9 3 76 27
1
/
4 692 50
1
/
4 1276 40
1
/
8 1019 24 610 5 127 339 154
RTH12 12 3 76 36
3
/
8 924 59
3
/
8 1509 40
1
/
8 1019 24 610 5 127 500 227
RTH18 18 3 76 54
1
/
2 1384 78 1981 40
1
/
8 1019 24 610 5 127 670 304
RTH18
FOOD SERVICE EQUIPMENT
RETHERMALIZERS
CARTER-HOFFMANN
Top View
All Models
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
RTH6
Front View
RTH9
Front View
RTH12
Front View
NSF/ANSI 4
Volts Phase kW Amps
208 1 8 50
240 1 8 50
208 3 9 30
240 3 9 30
Volts Phase kW Amps
208 1 8 50
240 1 8 50
208 3 9 30
240 3 9 30
RTH18
Front View
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847367-8981
www.carter-hoffmann.com
RTH6, RTH9, RTH12, RTH18
CORRECTIONAL RETHERMALIZATION CABINETS
Since 1947, Foodservice Equipment That Delivers!
OPERATOR FRIENDLY SOLID STATE CONTROLLER... Easy
to use controls. Menu driven programmable rethermalization
cycles for up to ten menu cycles. Four-stage retherm cycle
allows user to control retherm time and temperatures with
precision. Retherm from refrigerated to serving temperatures in
an hour or less. Note: retherm times will vary, depending on
density and load of product. Submittal of menu with order for
pre-programming of menu settings is recommended.
EASY GRIP DOOR HANDLE WITH MAGNETIC CATCH...
Ergonomically designed for easy opening. Keeps door positively
closed for optimal cabinet performance, but can be opened
fromthe inside for safety.
PRECISION ENGINEERED HEAT DUCT SYSTEM... Even and
efficient heating throughout the entire cabinet assures uniform
temperatures for safe and consistent heating of product.
HEAVY-DUTY, WELDED STAINLESS STEEL
CONSTRUCTION... All welded stainless steel interior and exterior
for maximum security and long life; easy to clean.
RTH9
shown with baskets (sold separately)
OPTIONAL
BASKET DOLLY...
For easy
transport and
handling of
meals before,
during and after
serving.
OPTIONAL
WIRE BASKET
(shown with Design
Specialties E-300
meal trays; not sold
by Carter-Hoffmann)
NSF/ANSI 4
Loading...