Carter Hoffman PTDST10 User Manual

SPECIFICATIONS
Printed in U.S.A. PTDST 0116
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
PERFORMANCE SERIES
ENCLOSED MOBILE TRAY CARTS
Two Door for 14”x18”, 15”x20”, 12”x19”, 12”x20”, and Room
Service Trays
cabinet construction. Ultra-quiet construction with sound-dampening features. Cabinet formed and welded to base. All seams turned in to eliminate raw edges. Two drain plug with tether.
VENTS...Vents on both ends to allow escape of excess heat and moisture.
TOP... Marine edge top to contain spills. Three-sided top rail with red corners.
CABINET MATERIAL...Nickel-bearing type 300 series stainless steel; 18 gauge polished exterior walls.
BASE FRAME...12 gauge stainless steel full depth bolsters.
CASTERS...6” Performa rubber casters with noise supression bearing covers Sealed roller bearing and double ball bearing swivel with cart wash resistant
Glacier FM grease. Plate mounted and bolted to base in offset wheel ahead pattern. Two swivel with brakes and two rigid.
BUMPER...Full perimeter, non-marking red vinyl bumper set in heavy-duty wrap­around 3/16” extruded aluminum frame with reinforced corner cut-outs.
DOORS...Double panel welded stainless steel doors. Two pin hinges bolted to cabinet; hinged on right. Cavity filled with with 1” thick high density fiberglass insulation. Full length integrated door handle with magnetic closure and magnetic door-open feature. 270 degree door swing.
HINGES...12 gauge all stainless steel hinges with 3/8” pin.
PUSH HANDLE... On shorter carts, the 3-sided top rail serves as the push
handle. On taller carts, two recessed 3/4” diameter tubular stainless steel handles are mounted vertically on each end for a total of four handles.
TRAY RACK ASSEMBLIES...Ultra-quiet with adjustable pin positions; assemblies are removable without tools and constructed of 18 gauge stainless steel. Welded-on tray slides with fixed standard spacing on 5.25” centers.
ACCESSORIES/OPTIONS...
Pass-through 4-sided top rail Alternate caster sizes and types 2 or 3 thermal airpots with rack Mini-Dome chillable condiment bin Condiment organizer Menu card holder (specify 8.5”x11” or
5”x7”)
Dry erase board Anti-slip mat for top of cart Remove top rail
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Carter-Hoffmann C.A.D. Drawing Scale: 1/4” = 1’
FOOD SERVICE EQUIPMENT
ENCLOSED MOBILE TRAY CARTS
CARTER-HOFFMANN
Top View
PTDST Models
Model Tray Capacity Inside Working Overall Dimensions Caster Shipping
Number 5.25” Standard Height Height Depth Width Diameter Weight
Spacing
1 tray/slide; end-loaded in mm in mm in mm in mm in mm lbs kgs
PTDST10 10 26
3
/
8 670 42
3
/
8 1076 26
3
/
8 670 41
1
/
2 1054 6 152 341 155
PTDST12 12 31
5
/
8 803 47
5
/
8 1209 26
3
/
8 670 41
1
/
2 1054 6 152 351 159
PTDST14 14 36
1
/
4 921 52
7
/
8 1343 26
3
/
8 670 41
1
/
2 1054 6 152 369 167
PTDST16 16 42
1
/
8 1070 58
1
/
8 1476 26
3
/
8 670 41
1
/
2 1054 6 152 379 172
PTDST18 18 47
3
/
8 1203 63
3
/
8 1609 26
3
/
8 670 41
1
/
2 1054 6 152 397 180
PTDST20 20 52
5
/
8 1337 68
5
/
8 1835 26
3
/
8 670 41
1
/
2 1054 6 152 407 185
PTDST16
Front View
PTDST12
Front View
PTDST10
Front View
PTDST14
Front View
PTDST18
Front View
PTDST20
Front View
PERFORMANCE SERIES
ENCLOSED MOBILE TRAY CARTS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
ULTRA-QUIET CONSTRUCTION... Sound-dampening features with corrosion-resistant 300 series stainless steel; easy to clean and structurally sound for long life.
PERFORMA CASTERS WITH NOISE SUPPRESSION BEARING COVERS... 6” diameter industrial grade casters with
non-marking red rubber cushioned tread. Rust resistant Delrin bearings with cart wash resistant Glacier FM grease. Long lasting and easy rolling, yet durable enough to withstand rigorous cart wash programs. Two fixed and two swivel casters for easy maneuvering.
WHEEL-AHEAD CASTER CONFIGURATION... Mounted to
base in offset wheel-ahead pattern for easy rolling over uneven surfaces. Allow for easy handling and steering.
FULL PERIMETER BUMPER... Non­marking bumper set in heavy-duty 3/15” extruded aluminum frame. Floating style, bolted to the base. Protects cart and contents from impacts; protects doorways and walls from damage.
ULTRA-QUIET RACKS... with adjustable pin positions to accommodate a variety of tray sizes. Tray spacing fixed on standard 5.25” centers.
PTDST12
VENTED END PANELS... Allow excess heat and moisture
build-up to escape, while maintaining highest food quality.
STAINLESS STEEL HINGES... Heavy-duty, 12 gauge hinges with 3/8” diameter pin for trouble-free door operation. 270 degree door swing.
DOUBLE PANEL DOORS... Insulated, flush mounted doors with fully-integrated door handle and stainless steel hinges. 270 degree door swing with magnetic closure and door-open feature.
Loading...