Carter Hoffman PHF825 User Manual

CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
SPECIFICATIONS
Printed in U.S.A. C15 0312
Carter-Hoffmann is a trademark
of Carter-Hoffmann, LLC
MOBILE FREEZERS
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet formed and welded to base. All seams turned in to eliminate raw edges.
CABINET MATERIAL...All stainless steel construction; 20 gauge polished exterior and 24 gauge interior.
BASE FRAME...12 gauge stainless steel full depth caster bolsters with 1” x 1” 14 gauge stainless steel perimeter tube supports welded to bolsters.
CASTERS...6” diameter, all swivel, polyurethane tread. Sealed roller bearing and double ball bearing swivel. Zerk grease fittings. Plate mounted and bolted to base in offset, wheel-ahead pattern. Two casters fitted with brakes.
BUMPER...Non-marking gray vinyl bumper set in heavy-duty 3/16” thick extruded aluminum frame with reinforced corner cutouts.
INSULATION...1 1/2” thick high density continuous wrap-around type fiberglass insulation.
PUSH HANDLES...Two heavy-duty aluminum handles mounted on sides of the cabinet. Reinforced back-up plates.
DOOR...Recessed within cart walls, top and base. Welded double panel stainless steel. 20 gauge polished exterior and 24 gauge interior. Filled with 1 1/2” thick high density fiberglass insulation.
HINGES...Stainless steel 12 gauge butt type hinges with 3/8” stainless steel pins.
LATCH...Flush mounted heavy-duty sliding latch with grip handle.
THERMOMETER...Flush mounted dial type with remote sensing bulb
TRA Y RACK ASSEMBLIES...Model PHF900: removable extruded aluminum rackes with extruded aluminum channel slides. Slides fixed at 1 1/2” centers; accommodate 18” x 26” sheet pans. Model PHF900: Removable 16 gauge stainless steel tray racks with 16 gauge stainless steel universal tray slides. Slides fully adjustable at 1 3/4” spacing; accommodate 18” x 26” sheet pans, 12” x 20” pans, gastronorm pans and 20” x 20” glass racks.
ON/OFF SWITCH... Toggle style with guard.
REFRIGERATION SYSTEM...Self­contained evaporator coil and blower refrigeration system. 1/3 H.P. air cooled high torque condensing unit, thermal expansion valve, filter/dehydrator, large capacity exchanger. Temperature range of -5OF to 32OF (-21OC to 0OC). Power indicating light illuminates when unit is plugged in. Refrigerant charge of approximately 25 oz. CFC-free R404a.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single phase, 8.5 running amps. Ten foot 3-wire rubber cord with 3 prong grounding plug. NEMA 5-15P.
PERFORMANCE...Capable of cooling cabinet to -5OF (-21OC). Approximate pull down time to 0
O
F(-18OC) approximately 45
minutes.
ACCESSORIES/OPTIONS...
Locking transport latch Locking door latch Menu card holder Lexan thermometer cover Alternate caster sizes and treads 4 wheel brakes Alternate electrical configurations Tamper-resistant screws Enhanced polyiso insulation Marine package
Model Pan/Tray Slide Pairs Inside Overall Dimensions Caster Shipping
Number Capacity Standard Working Height Height Depth Width Diameter Weight
18”x26” 12”x20” in mm in mm in mm in mm in mm lbs kgs
PHF900 30 - 30 45
3
/
4
1162 73
3
/
4
1873 35
3
/
8
899 30
5
/
8
778 6 152 408 185
PHF825* 12 24 12 45
3
/
4
1162 73
3
/
4
1873 37
3
/
4
959 33
3
/
4
857 6 152 498 226
FOOD SERVICE EQUIPMENT
MOBILE REFRIGERATORS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation.
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
* Indicates universal slides. Tray slides in universal models are adjustable in 1 3/4” increments. Standard capacity shown at 3 1/2” spacing.
PHF900
MOBILE FREEZERS
Since 1947, foodservice equipment that delivers!
COMPLETELY WELDED TURNED-IN SEAM CONSTRUCTION... All
stainless steel construction. Adds rigidity to entire cabinet for maximum durability and reliable performance, and eliminates raw edges for easy cleaning and safety.
OFFSET “WHEEL AHEAD” PATTERN... Only one wheel can pass over uneven surfaces at a time for easy handling and steering.
POLYURETHANE TREAD CASTERS WITH SEALED ROLLER BEARING... Long lasting, easy rolling for maximum load and minimum
maintenance.
HIGH EFFICIENCY REFRIGERATION SYSTEM WITH ENVIRONMENTALLY SAFE COOLANT... Blower
system provides consistent top to bottom air flow as well as quick “pull down” to operating temperatures and quick recovery during heavy usage periods.
HEAVY-DUTY BOTTOM MOUNTED CONDENSING UNIT... Provides low center of
gravity for transport application.
NON-MARKING BUMPER SET IN HEAVY-DUTY 3/16” THICK EXTRUDED ALUMINUM FRAME...
Protects doorways, walls and cart from damage.
FLUSH MOUNTED SLIDING DOOR LATCH WITH GRIP HANDLE...
Exclusively designed for transport applications. Door remains firmly closed during transport. Flush design protects latch from damage.
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
HEAVY-DUTY STAINLESS STEEL BASE FRAME... 12
gauge caster bolsters with tubular perimeter frame to withstand heavy loads and harsh transport conditions.
PHF825