Carter Hoffman PH1815 User Manual

Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
SPECIFICATIONS
Printed in U.S.A. F26 0612
Carter-Hoffmann is a trademark
PH1815 & PH1835
HEATED TRANSPORT CARTS
(top mounted heating system)
Universal Slides
CONSTRUCTION...Completely welded
cabinet construction and top corners, with outer cabinet formed to base and welded. All seams turned in to eliminate raw edges.
CABINET MATERIAL...All stainless steel construction; 20 gauge polished exterior and 24 gauge interior.
BASE FRAME...12 gauge stainless steel full depth bolsters with 1”x1” 14 gauge stainless steel perimeter tube supports welded to bolsters.
CASTERS...6” diameter, all swivel, polyurethane tread. Sealed roller bearing and double ball bearing swivel. Zerk grease fittings. Plated mounted and bolted to base in offset wheel-ahead pattern.
BUMPER... Non-marking gray vinyl bumper set in heavy-duty 3/16” thick extruded aluminum frame with reinforced corner cutouts.
INSULATION...High density fiberglass, full 1” thick continuous wrap-around type fiberglass insulation.
DOORS...Double panel stainless steel with heavy-duty vinyl gasket; 20 gauge polished exterior and 24 gauge interior. Filled with 1” thick high density fiberglass insulation.
HINGES...Adjustable edgemount hinges with chrome plated finish.
LATCH...Heavy-duty edge-mount latch for positive closing of door.
HANDLES... Two heavy-duty aluminum push handles, vertically mounted and welded to cabinet.
TRA Y RACK ASSEMBLIES... 16 gauge universal slides, fully adjustable at 1-3/4” spacing, placed into 18 gauge stainless steel baffles. Standard spacing at 3-1/2”. Each cabinet comes standard with a full set of slides for maximum capacity.
THERMOMETER...Dial type with remote sensing bulb. Set flush with control panel.
HEATING SYSTEM...Top mounted, all stainless steel construction. 1500 watt inconel-sheathed heating element. High impedence protected, internally cooled fan motor. Manual reset high-limit switch to protect all internal components.
Features include removable large capacity humidifying pan, on/off rocker switch, power indicating light, thermostat control knob, recessed 12 gauge stainless steel cord wrap, remote thermostat sensing bulb.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single phase, 1500 watts, 13 amps. Ten foot 3 wire rubber cord with 3 prong grounding plug. NEMA 5-15P.
PERFORMANCE...Capable of heating to 200OF (94OC). Preheat to 160OF (71OC) in approximately 25 minutes.
ACCESSORIES/OPTIONS...
Side-mounted transport latch with padlock hasp Locking Door Latch Tamper Resistant Fasteners Alternate Caster Sizes and Types Thermometer Protector Cover Rack & Heater Security Hold Downs Menu Card Holder PH1835 Only:
-pass-through door
-Dutch door
-pass-through, Dutch door (Dutch on
front, full solid on back)
Model Tray/Pan Slide Inside Working Overall Dimensions Caster Shipping
Number Capacity* Pairs Height Height Depth Width Diameter Weight
18”x 26” 12”x 20” Standard in mm in mm in mm in mm in mm lbs kgs
PH1815 12 24 12 45
3
/
4 1162 61
1
/
2 1562 38 965 31
1
/
2 800 6 152 425 193
PH1835 15 30 15 57
1
/
2 1461 75
1
/
4 1911 38 965 31
1
/
2 800 6 152 532 241
* Capacity shown at 3 1/2” spacing. Tray slides adjustable on 1 3/4” increments. Universal models will accommodate Gastronorm 2/1 pans (1 per slide), 1/1 pans (2 per slide) And 12’x20” glass racks.
FOOD SERVICE EQUIPMENT
HEATED TRANSPORTCARTS
CARTER-HOFFMANN
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
Top View
All Models
Front View
PH1835
Front View
PH1815
PH1835
PH1815 & PH1835
HEATED TRANSPORT CARTS
Since 1947, foodservice equipment that delivers!
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
COMPLETELY WELDED TURNED-IN SEAM CONSTRUCTION...Adds
rigidity to entire cabinet and eliminates raw edges for easy cleaning and safety.
OFFSET “WHEEL-AHEAD” PATTERN... Only one wheel can pass over uneven surfaces at a time for easy handling and steering.
DOUBLE WALL STAINLESS STEEL CABINET... Strongest,
most durable materials for longest life. Fully insulated for maximum heat retention. Energy Star.
POLYURETHANE TREAD CASTERS WITH SEALED ROLLER BEARING... Long lasting, easy rolling for
maximum load and minimum maintenance.
NON-MARKING BUMPER SET IN HEAVY-DUTY 3/16” THICK EXTRUDED ALUMINUM FRAME... Protects
doorways, walls and cart from damage. “Floating” bumper is attached to, but separate from cabinet base. Bumper absorbs the majority of impacts and protects integrity of entire cart from damage.
TOP MOUNTED HEATER...
Blower heating system with side mounted interior heat ducts for fast heat up, recovery and even heat distribution throughout cabinet. Removable without tools for easy maintenance and cleaning.
PH1835
HEAVY-DUTY CASTER BOLSTERS... 12 gauge full
depth bolsters with 1”x1” stainless steel perimeter channel supports. Provide greater load strength, accepting heavier shocks. Ideal for heavy loads and harsh transport conditions.
VERSATILE PAN SLIDES... Adjustable, universal pan slides accept both 12”x20” and 18”x26” pans as well as Gastronorm pans. Fully adjustable on 1.75” centers. Standard spacing at 3.5”. Cabinets come with a full set of slides for maximum capacity.
Loading...