Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
SPECIFICATIONS
Printed in U.S.A. F25 0412
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
PH185, PH181, PH1810, PH1830 & PH1860
HEATED TRANSPORT CARTS
(bottom mounted heating system)
Universal Slides
CONSTRUCTION...Completely welded
cabinet construction and top corners, with
outer cabinet formed to base and welded.
All seams turned in to eliminate raw edges.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior and
24 gauge interior.
BASE FRAME...12 gauge stainless steel full
depth bolsters with 1”x1” 14 gauge stainless
steel perimeter tube supports welded to
bolsters.
CASTERS... PH185: 3” rubber tread.
PH181, PH1810, PH1830, PH1860: 5” & 6”
diameter polyurethane tread. All swivel on
PH185, PH181, PH1820 and PH1830. Two
swivel and two rigid on PH1860. Sealed
roller bearing and double ball bearing
swivel. Zerk grease fittings. Plated mounted
and bolted to base in offset wheel-ahead
pattern. Two casters fitted with brakes.
BUMPER... Non-marking gray vinyl bumper
set in heavy-duty 3/16” thick extruded
aluminum frame with reinforced corner cutouts.
INSULATION...High density fiberglass, full
1” thick continuous wrap-around type
insulation.
DOOR(S)...Double panel welded stainless
steel with heavy-duty vinyl gasket. 20 gauge
polished exterior and 24gauge interior. Filled
with 1” thick high density fiberglass
insulation.
HINGES...Concealed, stainless steel hinge
with 5/15” pin. 180 degree door swing.
LATCH...Flush mounted heavy-duty sliding
latch for positive closing of door. Easy grip
handle bolted to door.
HANDLES... Two heavy-duty aluminum
push handles mounted to each end of
cabinet.
TRAY RACK ASSEMBLIES... 16 gauge
universal slides, fully adjustable at 1 3/4”
spacing, placed into 18 gauge stainless
steel rack post. Standard spacing at 3 1/2”.
THERMOMETER...Dial type with remote
sensing bulb. Located on side of cabinet.
Protected by lexan thermometer cover.
HEATING SYSTEM...Bottom-mounted, all
stainless steel construction. Removable
without tools.1600 watt inconel-sheathed
heating element. High impedence protected,
internally cooled fan motor. Full range
thermostat, remote sensing bulb & power
indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1650 watts, 13.7 amps. Ten foot 3
wire rubber cord with 3 prong grounding
plug. NEMA 5-15P.
PERFORMANCE...Capable of heating to
200
O
F (94OC). Preheat to 160OF (71OC) in
approximately 25 minutes.
ACCESSORIES/OPTIONS...
Transport latch with padlock hasp
Side mounted transport latch
Stainless steel tubular handle(s)
Locking door latch
Tamper resistant fasteners
Alternate caster sizes and types
Rack & heater security hold downs
Menu card colder
Correctional package
Alternate Electrical Configurations
High temperature stainless steel door
gaskets
Protective Lexan thermomter cover
Removable canned heat unit
Model Tray/Pan Slide Inside Working Overall Dimensions Caster Shipping
Number Capacity* Pairs Height Height Depth Width Diameter Weight
18”x26” 12”x20” Standard in mm in mm in mm in mm in mm lbs kgs
PH185 5 10 5 20
7
/8 530 301/2 775 36 914 305/8 778 3 76 225 102
PH181 6 12 6 23
1
/2 597 361/8 918 36 914 305/8 778 5 127 240 109
PH1810 13 26 13 46 1168 58 1473 36 914 30
5
/8 778 5 127 385 175
PH1830 16 32 16 57
1
/4 1454 71 1803 36 914 305/8 778 6 152 425 193
PH1860 26 52 26 46 1168 59
1
/4 1505 36 914 557/8 1419 6 152 568 258
* Capacity shown at 3 1/2” spacing. Tray slides adjustable on 1 3/4” increments.
FOOD SERVICE EQUIPMENT
HEATED TRANSPORT CARTS
CARTER-HOFFMANN
PH181
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
PH185, PH181,
PH1810, PH1830
Top View
PH1860
Top View
PH1860
Front View
PH185
Front View
PH181
Front View
PH1810
Front View
PH1830
Front View
PH185, PH181, PH1810, PH1830 & PH1860
HEATED TRANSPORT CARTS
Since 1947, foodservice equipment that delivers!
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
COMPLETELY WELDED
TURNED-IN SEAM
CONSTRUCTION... Outer
cabinet formed and welded to
base. All seams turned in the
eliminate raw edges. Adds
rigidity to entire cabinet.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bosters with 1”x1”
stainless steel perimeter
channel supports to withstand
heavy loads and harsh
transport conditions.
OFFSET “WHEEL AHEAD”
PATTERN... Only one wheel
can pass over uneven surfaces
at a time for easy handling and
steering.
POLYURETHANE TREAD
CASTERS WITH SEALED
ROLLER BEARING... Long
lasting, easy rolling for
maximum load and minimum
maintenance.
NON-MARKING GRAY VINYL
BUMPER... Set in heavy-duty
3/16” thick extruded aluminum
frame with reinforced corner
cut-outs. Protects doorways,
walls and cart from damage.
FLUSH MOUNTED SLIDING
DOOR LATCH... Exclusively
designed for transport
applications. Door remains
closed during transport. Flush
design protects latch from
damage.
UNIVERSAL TRAY/PAN
SLIDES... Heavy-duty stainless
steel slides are adjustable on 13/4” centers (standard spacing
at 3-1/2”. Accommodate
12”x20” steam table pans,
18”x26” sheet pans, 1/1 and 2/1
gastronorm pans, and 20”x20”
glass racks.
HIGH PERFORMANCE
HEATER... Blower heating
system with side mounted
interior heat ducts for fast
heat up, recovery and even
heat distribution throughout
cabinet. Removable without
tools for easy maintenance
and cleaning.
PH1830
Loading...