Carter Hoffman HWC10A1GM User Manual

Page 1
SPECIFICATIONS
Printed in U.S.A. E74 1110
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
Logix4 Series
hotLOGIX HEATED HOLDING & PROOFING CABINETS
(insulated aluminum with mechanical controls)
CONSTRUCTION...Welded & riveted double
CABINET MATERIAL...All aluminum interior and exterior double wall, insulated construction; .063 aluminum exterior with 2V finish.
BASE FRAME... .125 natural aluminum
CASTERS...5” diameter casters with rubber
tread. Four swivel casters. Two casters fitted with brakes.
DOOR...Single panel tempered glass door set in extruded aluminum frame. Field reversible. Full width aluminum drip trough with 1/2” drain at base of door. Removable plastic catch pan mounted under base of cabinet. High temperature silicone gasket mounted to door.
HINGES...Adjustable edge mount hinges with chrome plate finish.
LATCH...Heavy-duty edge mount latch with magnetic catch.
INSULATION... 1” thick high density continuous wrap-around insulation in sides and top.
TRA Y RACK ASSEMBLIES... Three slide styles with removable assemlies.
HWU: Universal 16 gauge stainless steel slides, removable and fully adjustable at 1-1/2” spacing. Standard spacing at 3” centers. Hold 18”x26” sheet pans, 12”x20” steam table pans, 2/1 or 1/2 GN pans. HWF: Universal wire slide at fixed spacing of 3”. Assemblies removable. Hold 18”x26” sheet pans, 12”x20” steam table pans, 2/1 or 1/2 G/N pans HWC: Fixed stainless steel angle slides on 1-1/2” centers hold 18”x26” sheet
pans.
THERMOMETER...Digital thermometer with remote sensing bulb and sensing bulb protector. Displays temperature in one degree increments.
CONTROLS...Dial type controls. One dial for heat and one dial for humidity level. Set temperature dial at 3 and humidity dial at 7+ for proofing (approximate temperature of 85
O
-100OF and 90-95% humidity).
WATER RESERVOIR...Bottom mounted stainless steel water reservoir is part of heater assembly. Element mounted below pan to provide active humidification. Manual fill. Capacity 2.5 quarts.
HEAT & HUMIDITY SYSTEM...Bottom mounted heater with one 1700 watt coiled incoloy-sheathed heating element. High impedence protected fan motor. Water reservoir with 350 watt element affixed to bottom. Blower fan circulates air and humidity. Full range thermostat and on/off switch with power indicating light. Separate dial controls for heat and humidity.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single phase, 2100 watts, 17.5 amps. Eight foot rubber cord with 3 prong grounding plug. NEMA 5-20P.
PERFORMANCE...Capable of heating to 190
O
F (88OC). Preheat to 160OF (71OC) in approximately 20 minutes. 95% maximum relative humidity.
ACCESSORIES/OPTIONS...
Menu card holder (solid door units only) Solid aluminum door with black anodized finish on
interior and exterior-replace “G” with “X” in model
number Extra slide pairs (HWU units only)
Model Pan/Tray Capacity Spacing Inside Working Overall Dimensions Caster Shipping
Number Height Height Depth Width Diameter Weight
12”x20” 18”x26” in mm in mm in mm in mm in mm in mm lbs kg
HWU5A1GM 10 5 3 76 15
1
/
4
387 31
5
/
8
803 31
1
/
2
800 26
1
/
2
673 5 127 113 51
HWC10A1GM -10 1
1
/
2
38 15
1
/
4
387 31
5
/
8
803 31
1
/
2
800 26
1
/
2
673 5 127 100 45
HWF5A1GM 10 5 3 76 15
1
/
4
387 31
5
/
8
803 31
1
/
2
800 26
1
/
2
673 5 127 104 47
HWU8A1GM 16 8 3 76 24
1
/
4
616 40
5
/
8
1032 31
1
/
2
800 26
1
/
2
673 5 127 159 72
HWC16A1GM -16 1
1
/
2
38 24
1
/
4
616 40
5
/
8
1032 31
1
/
2
800 26
1
/
2
673 5 127 141 64
HWF8A1GM 16 8 3 76 24
1
/
4
616 40
5
/
8
1032 31
1
/
2
800 26
1
/
2
673 5 127 147 67
HWU14A1GM 28 14 3 76 42
1
/
4
1073 58
5
/
8
1489 31
1
/
2
800 26
1
/
2
673 5 127 183 83
HWC28A1GM -28 1
1
/
2
38 42
1
/
4
1073 58
5
/
8
1489 31
1
/
2
800 26
1
/
2
673 5 127 163 74
HWF14A1GM 28 14 3 76 42
1
/
4
1073 58
5
/
8
1489 31
1
/
2
800 26
1
/
2
673 5 127 170 77
HWU18A1GM 36 18 3 76 54
1
/
4
1378 70
5
/
8
1794 31
1
/
2
800 26
1
/
2
673 5 127 235 107
HWC36A1GM -36 1
1
/
2
38 54
1
/
4
1378 70
5
/
8
1794 31
1
/
2
800 26
1
/
2
673 5 127 205 93
HWF18A1GM 36 18 3 76 54
1
/
4
1378 70
5
/
8
1794 31
1
/
2
800 26
1
/
2
673 5 127 218 99
FOOD SERVICE EQUIPMENT
HUMIDIFIED HOLDING CABINETS
CARTER-HOFFMANN
HWF18A1GM
Carter-Hoffmann CAD Drawing
Scale: 1/4” = 1’
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
HW undercounter
Front View
HW 1/2 size
Front View
HW 3/4 size
Front View
HW full size
Front View
All Models
Top View
Specifications subject to change
through product improvement &
innovation.
Page 2
Logix4 Series
hotLOGIX HUMIDIFIED HOLDING & PROOFING CABINETS
(insulated aluminum with mechanical controls)
Since 1947, Foodservice Equipment That Delivers!
EASY-TO-USE DIAL CONTROLS... From proofing to holding, control heat and humidity with separate analog dials and master on/off switch. Temperature range of 85OF to 190OF. Easy to read digital thermometer and recessed control dials, angled for easier reach. Proofing and holding capability in single cabinet. Cabinet can be operated without humidity.
FIELD REVERSIBLE DOOR(S)...
Single pane tempered glass door for easy viewing of cabinet contents, with magnetic door latch and heavy-duty hinges. Full perimeter silicone gasket attached to door for best seal.
DRIP TROUGH... Located at base of cabinet to catch condensation. Drain hole in center. Plastic drip pan below trough (provided) to catch condensation.
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
HWF18A1GM
(full size cabinet)
PRECISION ENGINEERED ACTIVE HEAT & HUMIDITY SYSTEM... Heat duct provides
even and efficient heating throughout the entire cabinet for safe and consistent results. Quick heat and humidity recovery. Proofing and holding can be accomplished in one cabinet. Unit provides full power to both heating and humidity elements regardless of whether you are holding or proofing.
FOUR SIZES... Logix4 series cabinets are available in under­counter (31-5/8” high), 1/2 size (40-5/8” high), 3/4 size (58-5/8” high) and full size (70-5/8” high).
THREE SLIDE STYLES... with removable assemblies.
HWU: Universal 16 gauge stainless steel slides,
removable and fully adjustable at 1-1/2” spacing. Standard spacing at 3” centers. Hold 18”x26” sheet pans, 12”x20” steam table pans, 2/1 or 1/2 GN pans.
HWF: Universal wire slide at fixed spacing of 3”. Assemblies removable. Hold 18”x26” sheet pans, 12”x20” steam table pans, 2/1 or 1/2 G/N pans
HWC: Fixed stainless steel angle slides on 1-1/2” centers hold 18”x26” sheet pans.
HWU adjustable universal slides
HWF fixed universal wire slides
HWC fixed angle slides
Loading...