SPECIFICATIONS
Printed in U.S.A. E26 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
HL8 Series
hotLOGIX HEATED HOLDING CABINETS
(with forced air heating system)
for 12” x 20” pans
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to cabinet liner and bolted to
base.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior
and 24 gauge interior.
BASE FRAME...16 gauge stainless steel
with all sides turned down for rigidity.
CASTERS...5” diameter heavy-duty
casters with rubber tread. Double ball
bearing swivel. Zerk grease fittings. Plate
mounted and bolted to base. Two casters
fitted with brakes.
INSULATION...High density fiberglass,
full 1” thick continuous wrap-around type
in top, bottom and sides.
DOORS...Double panel stainless steel;
20 gauge polished exterior and 24 gauge
interior. Filled with 1” thick high density
fiberglass insulation. Field reversible door
swing and gasketless design.
HINGES...Adjustable edgemount hinges
with chrome plate finish.
LATCH...Heavy-duty edgemount latch
with magnetic catch.
TRAY RACK ASSEMBLIES...Removable
16 gauge stainless steel tray racks with
18 gauge stainless steel channel slides.
Channel slides welded to rack
assemblies and spaced on 2 3/4” centers.
CONTROLS... Solid state electronic
temperature controller with digital
temperature display and temperature
alarm. On/off switch and power
indicating light.
LOW TEMPERATURE ALARM...
Equipped with audible low temperature
alarm. Factory pre-set at 150O F (66OC).
Adjustable range of 110OF (43OC) to 150OF
(66OC).
HEATING SYSTEM... Forced air heating
system. Incoloy-sheathed heating
element, fan motor, solid state
temperature controller, digital temperature
display and on/off switch with power
indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1000 watts, 8.3 amps. Six foot 3
wire rubber cord with 3 prong grounding
plug. NEMA 5-15P.
PERFORMANCE...Capable of heating to
200OF (94OC). Preheat to 160OF (71OC)
in approximately 20 minutes.
ACCESSORIES/OPTIONS...
Stacking kit
Pass-through doors
Glass doors
3” casters
4” legs in lieu of casters
Alternate electrical configurations
Model Pan Capacity* Inside Working Overall Dimensions Caster Shipping
Number Height Height Depth Width Diameter Weight
12” x 20” in mm in mm in mm in mm in mm lbs kgs
HL8-125 5 15
3
/4 400 305/8 778 243/4 629 183/8 467 5 127 152 69
HL8-128 8 24 610 38
7
/8 987 243/4 629 183/8 467 5 127 210 95
*Capacity shown for 2 1/2” deep pans.
HL8-125
FOOD SERVICE EQUIPMENT
HEATED HOLDING CABINETS
CARTER-HOFFMANN
HL8-125
Front View
HL8-128
Front View
Top View
All Models
Carter-Hoffmann CAD Drawing Scale: 1/4”=1’
ANSI/NSF 4
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com