ANSI/NSF 4
SPECIFICATIONS
Printed in U.S.A. E82 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
HL8 Series
hotLOGIX HEATED HOLDING CABINET
WITH 2-DRAWER WARMER
(stainless steel with electronic controls)
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to base. All seams turned in to
eliminate raw edges.
CABINET MATERIAL...All stainless steel
construction with polished exterior and
interior.
BASE FRAME...12 gauge stainless steel full
depth caster bolsters with 12 gauge
stainless steel perimeter supports welded to
bolsters.
CASTERS...5” diameter casters with rubber
tread. Four swivel casters. Two casters fitted
with brakes.
INSULATION...2” thick high density
continuous wrap-around type fiberglass
insulation.
DOOR...Welded double panel stainless steel
door; polished exterior and interior. Filled
with 2” thick high density fiberglass
insulation. Field reversible.
HINGES...Adjustable edge mount hinges
with chrome plate finish.
GASKET...High temperature Teflon gasket
mounted to cabinet.
HANDLES... Four recessed pull grips on
sides of cabinet.
DOOR LATCH...Heavy-duty edge mount
latch with magnetic catch.
TRAY RACK ASSEMBLY...Removable 18
gauge stainless steel ducts. Removable 16
gauge stainless steel universal slides, fully
adjustable on 1-1/2” centers. Standard
spacing at 3” centers.
THERMOMETER...digital thermometer with
remote sensing probe and sensing probe
protector.
DRAWER WARMER... Built-in drawer twodrawer warmer. Self-latching mechianism
with stainless steel tracks and bearings.
Stainless steel pan provided with each
drawer and is capable of holding a 12”x20”
pan up to 6” deep (end-loaded).
CONTROLS...
HOLDING CABINET: Digital controls and
readout displays for settings. Touchpad to
view actual temperature. Low temperature
sensor and indicating light. Audible alarm.
DRAWER WARMER: Individual thermostatic
dial temperature control - one on each
drawer. Adjustable front vent on each
drawer. Heat indicating lights.
HEATING SYSTEM...
HOLDING CABINET: Top mounted blower
heater for even heat distriubution. High
impedence protected, internally cooled fan
motor. Single cooling fan. Full range
thermostat and on/off switch with power
indicating light.
DRAWER WARMER: Static heating system.
Full range thermostat with dial controls and
power indicating light.
ELECTRICAL CHARACTERISTICS...
Holding cabinet operates on 120 volts, 60
cycle, single phase, 1100 watts, 9.2 amps.
Drawer warmer operates on 120 volts, 60
cycle, single phase, 900 watts, 7.5 amps.
Combined operation on 120 volts, 60 cycle,
2000 watts 16.7 amps. NEMA 5-20P plug.
Ten foot rubber cord with 3 prong grounding
plug.
PERFORMANCE...Capable of heating to
200
O
F (93OC). Preheat to 160OF (71OC) in
approximately 25 minutes.
ACCESSORIES/OPTIONS...
Menu card holder (solid door units only)
Alternate electrical configurations
Pass-through: add suffix “-P”
Tempered glass double pane door
Additional universal slide pairs
Fixed angle slides for 18”x26” sheet pans
Model Pan/Tray Capacity Spacing Inside Working Overall Dimensions Caster Shipping
Number Height Height Depth Width Diameter Weight
12”x20” 18”x26” in mm in mm in mm in mm in mm in mm lbs kg
HL8-10-RW 20 10 3 76 35
1
/
2
902 76
3
/
8
1940 32
5
/
8
829 28
1
/
4
718 5 127 458 208
drawer warmer 2* -
FOOD SERVICE EQUIPMENT
HEATED HOLDING CABINETS
CARTER-HOFFMANN
*Pans can be up to 6” deep
Specifications subject to change through product improvement & innovation.
Front View
Top View
shown with optional glass door
HL8-10-RW
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Side View