Carter Hoffman HL7-18 User Manual
SPECIFICATIONS
Printed in U.S.A. E77 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
HL7 Series
hotLOGIX HEATED HOLDING CABINETS
(stainless steel with mechanical controls)
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to base. All seams turned in to
eliminate raw edges.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior and
18 gauge interior.
BASE FRAME...12 gauge stainless steel full
depth caster bolsters with 12 gauge
stainless steel perimeter supports welded to
bolsters.
CASTERS...5” diameter casters with rubber
tread (3” casters on HWU5). Four swivel
casters. Two casters fitted with brakes.
INSULATION...2” thick high density
continuous wrap-around type fiberglass
insulation.
DOOR...Welded double panel stainless steel
door; 20 gauge polished exterior and 20
gauge interior. Filled with 2” thick high
density fiberglass insulation. Field
reversible.
HINGES...Adjustable edge mount hinges
with chrome plate finish.
GASKET...High temperature Teflon gasket
mounted to cabinet.
HANDLES... Four recessed pull grips on
sides of cabinet.
LATCH...Heavy-duty edge mount latch with
magnetic catch.
TRAY RACK ASSEMBLY...Removable 18
gauge stainless steel ducts. with removable
16 gauge stainless steel universal slides,
fully adjustable at 1-1/2” spacing. Standard
spacing at 3” centers.
THERMOMETER...Dial thermometer with
remote sensing probe and sensing probe
protector.
CONTROLS...Dial temperature control knob
and temperature display.
HEATING SYSTEM...Top mounted blower
heater for even heat distriubution. High
impedence protected, internally cooled fan
motor. Single cooling fan. Full range
thermostat and on/off switch with power
indicating light.
ELECTRICAL CHARACTERISTICS...
HL7-5 & HL7-8 operate on 120 volts, 60
cycle, single phase, 1100 watts, 9.2 amps.
Ten foot rubber cord with 3 pring grounding
plug. NEMA 5-15P. HL7-14 & HL7-18
operate on 120 volts, 60 cycle, single
phase, 2100 watts, 17.5 amps. Ten foot
rubber cord with 3 prong grounding plug.
NEMA 5-20P.
PERFORMANCE...Capable of heating to
200
O
F (93OC). Preheat to 160OF (71OC) in
approximately 25 minutes.
ACCESSORIES/OPTIONS...
Menu card holder (solid door units only)
Alternate electrical configurations
Dutch door-add suffix “-D” (HL7-14 &
HL7-18 only)
Dutch door/pass-thru-add suffix “-DP”
(HL7-14 & HL7-18 only)
Pass-through: add suffix “-P”
Tempered glass double pane doors
Fixed angles for 18”x26” sheet pans
Additional slide pairs (universal models
only)
Model Pan/Tray Capacity Spacing Inside Working Overall Dimensions Caster Shipping
Number Height Height Depth Width Diameter Weight
12”x20” 18”x26” in mm in mm in mm in mm in mm in mm lbs kg
HL7-5* 10 5 3 76 16
15
/
16
430 33
1
/
2
851 33
1
/
16
840 28 711 3 76 271 123
HL7-8 16 8 3 76 26
9
/
16
675 45
1
/
2
1156 33
1
/
16
840 28 711 5 127 322 146
HL7-14 28 14 3 76 45
1
/
2
1156 64
3
/
8
1635 33
1
/
16
840 28 711 5 127 423 192
HL7-18 36 18 3 76 57
1
/
2
1461 76
3
/
8
1940 33
1
/
16
840 28 711 5 127 495 225
FOOD SERVICE EQUIPMENT
HEATED HOLDING CABINETS
CARTER-HOFFMANN
*Under-counter height.
Specifications subject to change through product improvement & innovation.
HL7-5
Front View
HL7-18
Front View
All Models
Top View
HL7-14
Front View
shown with
optional clear
door
HL7-18
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
HL7-8
Front View
ANSI/NSF 4
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
HL7 Series
hotLOGIX HEATED HOLDING CABINETS
(stainless steel with mechanical controls)
Since 1947, Foodservice Equipment That Delivers!
FIELD REVERSIBLE DOOR(S)... Double panel, fully
insulated, with magnetic door latch and heavy-duty
hinges. Full perimeter silicone gasket attached to
cabinet.
FOUR CABINET SIZES... Under-counter, 1/2 height, 3/4 height and full height cabinets with true
capacities. Cabinets have adjustable universal slides for 12”x20”, 18”x26” and Gastronorm pans.
Optional fixed angle sides for 18”x26” sheet pans.
SIMPLE DIAL CONTROL... Dial in temperature from
85oF to 200oF. Dial type temperature readout.
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
HL7-18
(shown with optional clear door)
PRECISION ENGINEERED HEAT DUCT SYSTEM...
Stainless steel heat duct provides even and efficient
heating throughout the entire cabinet for safe and
consistent results. Temperature stratification throughout
cabinet during preheat and hold is less than 2
o
F (NSF
test protocol). Quick heat recovery. Ducts removable
without tools for easy cleaning.
HL7-8
HL7-5
ANSI/NSF 4
HL7-18
Loading...