SPECIFICATIONS
Printed in U.S.A. E75 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
HL5 Series
hotLOGIX HEATED HOLDING CABINETS
(insulated aluminum with mechanical controls)
CONSTRUCTION...Riveted aluminum
double wall cabinet construction. All seams
turned in to eliminate raw edges. Four
recessed pull grips on sides of cabinet.
CABINET MATERIAL...All aluminum interior
and exterior double wall, insulated
construction; .063 aluminum exterior with 2V
finish.
BASE FRAME...Full depth caster bolsters
with perimeter supports welded to bolsters.
CASTERS...5” diameter casters with rubber
tread (3” casters on HL5-5). Four swivel
casters. Two casters fitted with brakes.
INSULATION...2” thick high density
continuous wrap-around type fiberglass
insulation.
DOOR...Double panel door; .063 brushed
aluminum exterior and stainless steel
interior. Filled with 2” thick high density
fiberglass insulation.
HINGES...Adjustable, self-closing, edge
mount hinges with chrome plate finish.
GASKET...High temperature magnetic
gasket mounted to cabinet.
LATCH...Side mounted, 12 gauge stainless
steel latch keeps door securely closed.
DOOR HANDLE...Full length integrated
door handle. Side-mounted transport
latch(es) for secure closure.
TRAY RACK ASSEMBLY...Removable
andodized aluminum ducts. Removable 16
gauge stainless steel universal slides, fully
adjustable at 1-1/2” spacing. Standard
spacing at 3” centers.
THERMOMETER...Dial thermometer with
remote sensing probe and sensing probe
protector.
CONTROLS...Dial temperature control knob
and temperature display.
HEATING SYSTEM...Top mounted blower
heater for even heat distriubution. High
impedence protected, internally cooled fan
motor. Single cooling fan. Full range
thermostat and on/off switch with power
indicating light.
ELECTRICAL CHARACTERISTICS...
HL5-5 & HL5-8 operate on 120 volts, 60
cycle, single phase, 1100 watts, 9.2 amps.
Ten foot rubber cord with 3 pring grounding
plug. NEMA 5-15P. HL5-14 & HL5-18
operate on 120 volts, 60 cycle, single
phase, 2100 watts, 17.5 amps. Ten foot
rubber cord with 3 prong grounding plug.
NEMA 5-20P.
PERFORMANCE...Capable of heating to
200
O
F (93OC). Preheat to 160OF (71OC) in
approximately 25 minutes.
ACCESSORIES/OPTIONS...
Menu card holder (solid door units only)
Alternate electrical configurations
Dutch door-add suffix “-D” (HL5-14 &
HL5-18 only)
Dutch door/pass-thru-add suffix “-DP”
(HL5-14 & HL5-18 only)
Pass-through: add suffix “-P”
Tempered glass double pane doors
Fixed angle slides for 18”x26” sheet pans
Electronic controls
Model Pan/Tray Capacity Spacing Inside Working Overall Dimensions Caster Shipping
Number Height Height Depth Width Diameter Weight
12”x20” 18”x26” in mm in mm in mm in mm in mm in mm lbs kg
HL5-5* 10 5 3 76 16
15
/
16
430 33
1
/
2
851 33
1
/
16
840 28 711 3 76 203 92
HL5-8 16 8 3 76 26
9
/
16
675 45
1
/
2
1156 33
1
/
16
840 28 711 5 127 241 109
HL5-14 28 14 3 76 45
1
/
2
1156 64
3
/
8
1635 33
1
/
16
840 28 711 5 127 317 143
HL5-18 36 18 3 76 57
1
/
2
1461 76
3
/
8
1940 33
1
/
16
840 28 711 5 127 371 168
FOOD SERVICE EQUIPMENT
HEATED HOLDING CABINETS
CARTER-HOFFMANN
*Under-counter height.
Specifications subject to change through product improvement & innovation.
HL5-5
Front View
HL5-18
Front View
All Models
Top View
HL5-14
Front View
HL5-18
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
HL5-8
Front View
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com