SPECIFICATIONS
Printed in U.S.A. E73 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
HL3 Series
hotLOGIX HEATED HOLDING CABINETS
(insulated aluminum with mechanical controls)
CONSTRUCTION...Welded & riveted double
wall, insulated cabinet construction with
cabinet welded to base.
CABINET MATERIAL...All aluminum interior
and exterior double wall, insulated
construction; .063 aluminum exterior with 2V
finish.
BASE FRAME... .125 natural aluminum
CASTERS...5” diameter casters with rubber
tread. Four swivel casters. Two casters fitted
with brakes.
DOOR...Single panel tempered glass door
set in extruded black anodized aluminum
frame. Field reversible. Full width aluminum
drip trough with 1/2” drain located at base of
door. Removable plastic catch pan mounted
under base of cabinet. High temperature
santoprene gasket mounted to door.
HINGES...Adjustable edge mount hinges
with chrome plate finish.
LATCH...Heavy-duty edge mount latch with
magnetic catch.
INSULATION... 1” thick high density
continuous wrap-around insulation in sides
and top.
TRAY RACK ASSEMBLIES... Universal
wire slides at fixed spacing of 3”.
Assemblies removable. Hold 18”x26” sheet
pans, 12”x20” steam table pans, 2/1 or 1/2
G/N pans.
THERMOMETER...Digital thermometer with
remote sensing bulb and sensing bulb
protector. Displays temperature in one
degree increments.
CONTROLS...Single dial for heat setting.
WATER RESERVOIR...Bottom mounted
stainless steel water reservoir is part of
heater assembly. Passive evaporative
humidification provided. Manual fill. Capacity
2.5 quarts.
HEATING SYSTEM...Bottom mounted
heater with one 1700 watt coiled incoloysheathed heating element. High impedence
protected fan motor. Blower fan circulates
air. Full range thermostat and on/off switch
with power indicating light. Dial control for
heat settings.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1750 watts, 15 amps. Eight foot
rubber cord with 3 prong grounding plug.
NEMA 5-20P. See low wattage options
below.
PERFORMANCE...Capable of heating to
190
O
F (88OC). Preheat to 160OF (71OC) in
approximately 30 minutes. Low wattage
options will affect cabinet performance.
ACCESSORIES/OPTIONS...
Menu card holder (solid door units only)
Solid aluminum door with black anodized finish on
interior and exterior
Adjustable universal tray slides for 12”x20” and
18”x26” pans; 3” spacing
Fixed angle slides for 18”x26” pans at 1.5” spacing
Low wattage: 120v, 12.5A, 1500w, NEMA 5-15P
CSA low wattage: 120v, 12A, 1400w, NEMA5-15P
Dutch doors (HL3-18 only)
Model Pan/Tray Capacity Spacing Inside Working Overall Dimensions Caster Shipping
Number Height Height Depth Width Diameter Weight
12”x20” 18”x26” in mm in mm in mm in mm in mm in mm lbs kg
HL3-5
10 5 3 76 15
1
/
4
387 31
5
/
8
803 31
1
/
2
800 26
1
/
2
673 5 127 104 47
HL3-8
16 8 3 76 24
1
/
4
616 40
5
/
8
1032 31
1
/
2
800 26
1
/
2
673 5 127 147 67
HL3-14
28 14 3 76 42
1
/
4
1073 58
5
/
8
1489 31
1
/
2
800 26
1
/
2
673 5 127 170 77
HL3-18
36 18 3 76 54
1
/
4
1378 70
5
/
8
1794 31
1
/
2
800 26
1
/
2
673 5 127 218 99
HL3-5
Front View
HL3-8
Front View
HL3-14
Front View
HL3-18
Front View
FOOD SERVICE EQUIPMENT
HOLDING CABINETS
CARTER-HOFFMANN
HL3-18
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Carter-Hoffmann CAD Drawing
Scale: 1/4” = 1’
All Models
Top View
Specifications subject to change through product improvement & innovation.