ANSI/NSF 4
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
SPECIFICATIONS
Printed in U.S.A. E70 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
HL10 Series
hotLOGIX HUMIDIFIED HOLDING CABINETS
(stainless steel with electronic controls)
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to base. All seams turned in to
eliminate raw edges.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior and
18 gauge interior.
BASE FRAME...12 gauge stainless steel full
depth caster bolsters with 12 ga. stainless
steel perimeter supports welded to bolsters.
CASTERS...5” diameter casters with rubber
tread (3” casters on HL10-5). Four swivel
casters. Two casters fitted with brakes.
INSULATION...2” thick high density
continuous wraparound fiberglass insulation.
DOOR...Welded double panel stainless steel
door; 20 gauge polished exterior and 20
gauge interior. Filled with 2” thick high
density fiberglass insulation. Field
reversible. Removable stainless steel drip
trough at base of door. High temperature
Teflon gasket mounted to cabinet.
HINGES...Adjustable edge mount hinges
with chrome plate finish.
HANDLES...4 recessed pull grips on sides.
LATCH...Heavy-duty edge mount latch with
magnetic catch.
TRAY RACK ASSEMBLY...Removable 18
gauge stainless steel ducts. Removable 16
gauge stainless steel universal slides, fully
adjustable at 1-1/2” spacing. Standard
spacing at 3” centers.
THERMOMETER...digital thermometer with
remote sensing probe and sensing probe
protector.
CONTROLS...Separate digital controls for
heat and humidity. Digital readout displays
settings. Touchpad to view actual
temperature & humidity. Low water and
temperature sensors and indicating lights.
Audible alarm. Water probe is adjustable to
variations in water quality.
WATER RESERVOIR...Water bath slides
out for manual filling. Clear amber color high
temperature polycarbonate pan allows for
viewing of water level. Slides out for easy
filling & removal. Easy to remove for
cleaning and inexpensive to replace. HL1014 & HL10-18: 5.7 quart (5.4 liter) capacity.
HL10-5 & HL10-8: 3.8 quart, 3.6 liter
capacity.) Autofill capability.
HEAT & HUMIDITY SYSTEM...Top mounted
heater with one 1000 watt coiled incoloysheathed heating element. High impedence
protected, internally cooled fan motor. Single
cooling fan. Water reservoir with immersed
1000 watt heating element. Blower fan
circulates air and humidity. Extra large
surface area to quickly recover humidity
level. Full range thermostats and on/off
switch with power indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 2100 watts, 17.5 amps. Ten foot
rubber cord with 3 prong grounding plug.
NEMA 5-20P (USA); NEMA 5-30P
(Canada).
PERFORMANCE...Capable of heating to
200
O
F (93OC). Preheat to 160OF (71OC) in
approximately 25 minutes. 90% maximum
relative humidity.
ACCESSORIES/OPTIONS...
Menu card holder (solid door units only)
Alternate electrical configurations
Dutch door-add suffix “-D” (HL10-14 &
HL10-18 only)
Dutch door/pass-thru add suffix “-DP”(HL10-14
& HL10-18 only)
Pass-through: add suffix “P”
Tempered glass double pane door
Additional universal slide pairs
Fixed angle slides for 18”x26” sheet pans
Model Pan/Tray Capacity Spacing Inside Working Overall Dimensions Caster Shipping
Number Height Height Depth Width Diameter Weight
12”x20” 18”x26” in mm in mm in mm in mm in mm in mm lbs kg
HL10-5* 10 5 3 76 15
5
/
16
389 33
1
/
2
851 33
1
/
16
840 28 711 3 76 271 123
HL10-8 16 8 3 76 24
15
/
16
634 45
1
/
2
1156 33
1
/
16
840 28 711 5 127 322 146
HL10-14 28 14 3 76 42
1
/
2
1080 64
7
/
8
1635 33
1
/
16
840 28 711 5 127 423 192
HL10-18 36 18 3 76 54
1
/
2
1384 76
3
/
8
1940 33
1
/
16
840 28 711 5 127 495 225
HL10-5
Front View
HL10-8
Front View
HL10-18
Front View
All Models
Top View
HL10-14
Front View
FOOD SERVICE EQUIPMENT
HUMIDIFIED HOLDING CABINETS
CARTER-HOFFMANN
*Under-counter height.
shown with
optional glass
Dutch doors
HL10-18-D
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’