Carter Hoffman E8623 Specifications
SPECIFICATIONS
Printed in U.S.A. J15 0609
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
E8600H Series (Heated)
ALUMINUM TRANSPORT & STORAGE CARTS
Non-Insulated Aluminum with Angle Slides for 18”x26” Sheet pans
CONSTRUCTION...Straight line modular
styling with all seams hemmed-in for
added strength & durability. Heavy
gauge aluminum construction is heli-arc
welded to form solid unit. Reinforced with
horizontal stabilizing bar and welded-on
top, corner & bottom reinforcements. Side
panels have heli-arc welded interlocking
inverted “V”s.
CABINET MATERIAL...Entire cabinet
constructed heavy gauge aluminum. Top
constructed of inner and outer panel,
each constructed of .063” aluminum and
heli-arc welded into solid piece. Back
constructed of .080” thick aluminum,
brake formed into “C” type section to join
near uprights with extra middle
reinforcements. Sides constructed of
.075” thick extruded aluminum panels
with interlocking, heli-arc welded “V”
seams.
BASE FRAME...Constructed of .190”
thick aluminum brake formed and heli-arc
welded into solid piece. Entire base
frame, bolster pads and supports are heliarc welded.
UPRIGHTS... Constructed of 1”x1”x.125”
thick extruded aluminum channels.
Uprights are heli-arc welded to base and
top of cabinet.
CASTERS...5” diameter polyurethane
tread casters with Delrin sleeve axle
bearing and full ball bearing swivel,
plated mounted and bolted to frame.
DOOR...Single panel construction .090”
thick aluminum with all sides hemmed in
and heli-arc welded.
LATCH...Flush mounted heavy duty
stainless steel sliding latch for positive
closure.
HINGES...Heavy-duty stainless steel
hinges with 270 degree swing. Top and
bottom hinges are integrally mounted to
cabinet to keep door square.
TRAY SLIDES...Horizontal, .100”
aluminum tray slides fixed on 1-1/2”
centers.
HEATING SYSTEM... Stainless steel
construction. Lift out type. Entire unit
removable without the use of tools. 1600
watt inconel-sheathed heating element.
High impedance protected, internally
cooled fan motor with self-lubricating
bearing. Adjustable full range thermostat
and power indicating light. Ten foot 16/3
appliance cord with 3-prong grounding
plug. Front mounted bracket served as
cord wrap and lift-out handle.
PERFORMANCE... Capable of heating to
200oF (93oC). Preheat time to 160oF
(71oC), approximately 20 minutes.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1650 watts, 13.7 amps. Ten foot,
3 wire rubber cord with 3 pring grounding
plug. NEMA 5-15P.
ACCESSORIES/OPTIONS...
Full perimeter bumper
Corner bumpers
Swing door catch
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Capacity Inside Overall Dimensions Caster Shipping
Number 18”x26” Trays Working Height Depth Width Diameter Weight
1-1/2” Spacing Height in mm in mm in mm in mm lbs kgs
E8623H 18 27
3
/
4
45
3
/
8
1153 30 762 23
3
/
4
603 5 127 131 59
E8631H 26 39
3
/
4
57
3
/
8
1457 30 762 23
3
/
4
603 5 127 141 64
E8639H 34 51
3
/
4
69
3
/
4
1762 30 762 23
3
/
4
603 5 127 151 68
*Standard capacity fixed on 1-1/2” centers.
FOOD SERVICE EQUIPMENT
ALUNINUM UTILITY CABINETS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation.
E8639H
SPECIFICATIONS
Printed in U.S.A. J15 0609
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
E8600 Series (Unheated)
ALUMINUM TRANSPORT & STORAGE CARTS
Non-Insulated Aluminum with Angle Slides for 18”x26” Sheet pans
FOOD SERVICE EQUIPMENT
ALUNINUM UTILITY CABINETS
CARTER-HOFFMANN
E8639
CONSTRUCTION...Straight line modular
styling with all seams hemmed-in for
added strength & durability. Heavy
gauge aluminum construction is heli-arc
welded to form solid unit. Reinforced with
horizontal stabilizing bar and welded-on
top, corner & bottom reinforcements. Side
panels have heli-arc welded interlocking
inverted “V”s.
CABINET MATERIAL...Entire cabinet
constructed heavy gauge aluminum. Top
constructed of inner and outer panel,
each constructed of .063” aluminum and
heli-arc welded into solid piece. Back
constructed of .080” thick aluminum,
brake formed into “C” type section to join
near uprights with extra middle
reinforcements. Sides constructed of
.075” thick extruded aluminum panels
with interlocking, heli-arc welded “V”
seams.
BASE FRAME...Constructed of .190”
thick aluminum brake formed and heli-arc
welded into solid piece. Entire base
frame, bolster pads and supports are heliarc welded.
UPRIGHTS... Constructed of 1”x1”x.125”
thick extruded aluminum channels.
Uprights are heli-arc welded to base and
top of cabinet.
CASTERS...5” diameter polyurethane
tread casters with Delrin sleeve axle
bearing and full ball bearing swivel,
plated mounted and bolted to frame.
DOOR...Single panel construction .090”
thick aluminum with all sides hemmed in
and heli-arc welded.
LATCH...Flush mounted heavy duty
sliding stainless steel latch for positive
closure.
HINGES...Heavy-duty stainless steel
hinges with 270 degree swing. Top and
bottom hinges are integrally mounted to
cabinet to keep door square.
TRAY SLIDES...Horizontal, .100”
aluminum tray slides fixed on 1-1/2”
centers.
ACCESSORIES/OPTIONS...
Full perimeter bumper
Corner bumpers
Swing door catch
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Capacity Inside Overall Dimensions Caster Shipping
Number 18”x26” Trays Working Height Depth Width Diameter Weight
1-1/2” Spacing Height in mm in mm in mm in mm lbs kgs
E8623 23 27
3
/
4
45
3
/
8
1153 30 762 23
3
/
4
603 5 127 113 51
E8631 31 39
3
/
4
57
3
/
8
1457 30 762 23
3
/
4
603 5 127 123 56
E8639 39 51
3
/
4
69
3
/
4
1762 30 762 23
3
/
4
603 5 127 133 60
*Standard capacity fixed on 1-1/2” centers.
Specifications subject to change through product improvement & innovation.
Loading...