SPECIFICATIONS
Printed in U.S.A. E55 0210
Carter-Hoffmann is a registered
trademark of Carter-Hoffmann LLC
CW2E & CW4
NACHO CHIP WARMERS
(with top-mounted forced air heating system)
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to cabinet liner.
CABINET MATERIAL...All stainless steel
construction
INSULATION...High density fiberglass,
full 1” thick continuous wrap-around type
in top, bottom and sides.
DOORS...16 gauge single panel polished
stainless steel.
HINGES...Integral and continuous rolled
butt type hinges. Removable stainless
steel full length pin.
LEGS... 4” adjustable legs
HANDLES... Bottom door and product
loading door feature integrally formed, full
width stainless steel handles.
BOTTOM CRUMB PAN... Standard
12”x20”x2.5” stainless steel pan, mounted
on bottom of unit to catch crumbs. Slides
out for easy cleaning.
CONTROLS...Internal mechanical
thermostat. Factory pre-set temperature
of 175oF (79oC). Adjustable with tools via
access hole with grommet; located on
rear of heating unit. On/off switch with
power indicating light.
HEATING SYSTEM...Top mounted lift off
forced air heating system. Incoloysheathed heating elements, heavy duty
fan motor. Air forced through rear duct
and up through bottom chip grates. Duct
and grates removable for cleaning.
ELECTRICAL CHARACTERISTICS...
CW2E & CW4 operate on 1530 watts,
12.6 amps, 60 cycle, single phase. Six
foot 3 wire rubber cord with 3 prong
grounding plug. NEMA 5-15P.
PERFORMANCE...Capable of heating to
190OF (88OC). Preheat to 160OF (71
O
C) in approximately 20 minutes.
ACCESSORIES/OPTIONS...
18 gauge stainless steel rolling stand
with 3”stem casters, two with brakes
1/4” thick clear polycarbonate viewing
window in bottom door
220 or 240 volt electrical
configuration
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
Tel (847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Capacity Overall Dimensions Legs Shipping
Number Height Depth Width Weight
Cubic Feet* in mm in mm in mm in mm lbs kgs
CW2E 3.00 38
3
/4984 23 584 223/
4
578 4 102 135 61
CW4 5.75 45
1
/21156 28 711 301/
8
765 4 102 160 73
*Approximately 22 gallons of chips in CW2 and 44 gallons of chips in CW4.
CW4
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
FOOD SERVICE EQUIPMENT
NACHO CHIP WARMERS
CARTER-HOFFMANN
NSF/ANSI 4
CW2E
Front View
CW2E
Side View
CW2E
Top View
CW4
Top View
CW4
Front View
CW4
Side View
CW2E & CW4
NACHO CHIP WARMERS
Since 1947, Foodservice Equipment That Delivers!
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel (847)362-5500
.
(800) 323-9793
.
Fax (847) 367-8981
www.carter-hoffmann.com
HIGH PERFORMANCE
CONVECTION HEATER...
Heating system located in top
of cabinet with blower for
quick heat up and recovery
and even heat distribution
throughout cabinet.
Thermostat for optimal
holding temperature located
on rear of cabinet; accessible
& adjustable with tools to
prevent easy tampering.
Heater lifts off for easy
cleaning and service.
LARGE CHIP CAPACITY...
Provides ample supply of
product, even during peak
rush periods. Approximatey
44 gallons in CW4 and 22
gallons in CW2.
PATENTED FIRST-IN,
FIRST-OUT GRAVITY
PRODUCT FEED...
Facilitates constant product
rotation to ensure freshness.
STAINLESS STEEL
CONSTRUCTION... All
stainless steel exterior for
easy sanitation and long
lasting clean appearance.
EXCLUSIVE HEAT DUCT BAFFLING SYSTEM...
Warm air is directed through duct in back of
cabinet and up through chips on the bottom.
Assures uniform temperatures throughout cabinet
for consistent holding of product.
BOTTOM CRUMB PAN... Catches broken
chips and crumbs. Easily removed
without tools for cleaning. Standard
steam table size is easily replaceable.
CW2E
(shown with optional clear bottom door)
NSF/ANSI 4
Loading...