Carter Hoffman CW1 User Manual
SPECIFICATIONS
Printed in U.S.A. E54 0808
Carter-Hoffmann is a registered
trademark
CW1
NACHO CHIP WARMER
(with forced air heating system)
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to cabinet liner.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior
and 20 gauge interior.
INSULATION...High density fiberglass,
full 1” thick continuous wrap-around type
in bottom and sides.
DOORS...Single panel polished stainless
steel. Product loading door features
hinged front for easy loading. Loading
door functions as chip ramp during
loading. Serving door features two
heavy-dity magnetic catches and
functions as a platform for holding
baskets in the open position.
HINGES...Integral and continuous rolled
butt type hinges. Removable stainless
steel full length hinge pin.
HANDLE... Bottom door and product
loading door feature integrally formed, full
width stainless steel handles.
BOTTOM CRUMB DRAWER...
Integrated bottom drawer with drawer
stop. Slides out for easy cleaning.
LEGS... 4” legs are standard. 1” rubber
feet or 2” casters are optional.
CONTROLS...Internal mechanical
thermostat. Factory pre-set temperature
of 175oF (79oC). Adjustable with tools via
access hole with grommet; located on
rear of cabinet. On/off switch with power
indicating light.
HEATING SYSTEM...Top mounted forced
air heating system. Incoloy-sheathed
heating elements, heavy duty fan motor.
ELECTRICAL CHARACTERISTICS...
Operates on 120v, 1040 watts, 8.7 amps,
60 cycle, single phase. Six foot 3 wire
rubber cord with 3 prong grounding plug.
NEMA 5-15P.
PERFORMANCE...Capable of heating to
190OF (88OC). Preheat to 160OF (71
O
C) in approximately 20 minutes.
ACCESSORIES/OPTIONS...
240 volt electrical configuration
1/4” thick clear polycarbonate doors
1” rubber feet
2” casters
(Note: ULeph listing does not apply if 1” rubber
feet or 2” caster options are chosen)
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
Tel (847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Capacity Overall Dimensions Legs Shipping
Number Height** Depth Width Weight
Cubic Feet* in mm in mm in mm in mm lbs kgs
CW1 2.75 27
1
/4692 251/
2
648 283/
8
721 4 102 135 64
*Approximately 20 gallons of chips.
** Height includes 4” legs. Ordering optional casters or rubber feet will decrease height.
CW1
(shown with optional clear doors)
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
FOOD SERVICE EQUIPMENT
NACHO CHIP WARMERS
CARTER-HOFFMANN
CW1
Front View
CW1
Side View
CW1
Top View
NSF/ANSI 4
CW1
NACHO CHIP WARMER
Since 1947, Foodservice Equipment That Delivers!
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel (847)362-5500
.
(800) 323-9793
.
Fax (847) 367-8981
www.carter-hoffmann.com
HIGH PERFORMANCE CONVECTION
HEATER... Heating system located in top
of cabinet with blower for quick heat up
and recovery and even heat distribution
throughout cabinet.
LARGE CHIP CAPACITY...
Provides ample supply of product, even
during peak hours. Approximatey 20
gallons. Interior chip ramp is removable
for easy cleaning.
PATENTED FIRST-IN FIRST-OUT
GRAVITY PRODUCT FEED... Facilitates
constant product rotation to ensure
freshness.
STAINLESS STEEL CONSTRUCTION...
All stainless steel for easy sanitation and
long lasting clean appearance.
EXCLUSIVE HEAT DUCT BAFFLING
SYSTEM... Warm air is directed through
duct and up through chips on the bottom.
Assures uniform temperatures throughout
cabinet for consistent holding of product.
BOTTOM CRUMB DRAWER.. Catches
broken chips and crumbs. Easily
removed without tools for cleaning.
EXCLUSIVE DOOR DESIGN... Top door
folds out and forms ramp to enable easy
product fill. Serving door folds out and
creates platform to rest baskets while
serving.
NSF/ANSI 4
CW1
(shown with optional clear doors)
Loading...