Carter Hoffman CRR144 User Manual

CONSTRUCTION...Completely welded

cabinet construction and top corners, with
outer cabinet formed to base and welded.
All seams turned in to eliminate raw edges.
All exposed fasteners are tamper resistant.
No open crevices or holes. Cabinet divided
into two parts with insulated divider between
the sections.

CABINET MATERIAL...300 series stainless
steel construction; 18 gauge polished
exterior and 18 gauge interior.

BASE FRAME...12 gauge stainless steel full
depth bolsters with 1”x1” 16 gauge stainless
steel perimeter tube supports welded to
bolsters. Bottom of cabinet completely
covered to deter concealed contraband.

CASTERS...Six 8” diameter, industrial grade
semi-pneumatic casters. Sealed roller
bearing and double ball bearing swivel.
Zerk grease fittings. Plate mounted and
secured to base with tamper-resistant
fasteners and hub threads. Offset wheel­ahead pattern. 4 swivel (corners); 2 rigid
(center).

BUMPER... Heavy-duty 1/8 aluminum base
with non-marking gray vinyl insert.
Reinforced with brackets bolted and welded
to body of cabinet. Additional reinforcements
from bottom of bumper welded to base of
cabinet.

INSULATION...1” thick foam board and 1”
thick high density fiberglass insulation in
sides, bottom, top, doors and center wall.

DOORS...Non-removable, welded double
panel stainless steel; 18 gauge polished
exterior and 18 gauge interior. Filled with
foam insulation. 270 degree door swing.
Latchless design with magnetic closures.

HINGES...Heavy-duty 12 gauge stainless
steel strap hinges with 3/8” stainless steel
pins welded to each door and cabinet

TRANSPORT LATCH...Welded-on 12
gauge stainless steel transport latch with
padlock provision.

PUSH HANDLES... Two 3/4” recessed
horizontal full width stainless steel tubular
push handles with back up plates. Set in 18
gauge recessed housing, reinforced and
welded in place.

NESTED TRAY TRANSPORT... Covered
trays nest and stack on floor. Optional tray
racks for 12x20x2.5” or 18”x26” sheet pans
or Design Specialties T-500 meal trays.

THERMOMETERS...Each refrigeration
module features digital display with remote
sensing bulb.

REFRIGERATION MODULES... To p
mounted self-contained refrigeration system,
removable with tools. Digital temperature
control and display. Concealed thermostat
for tamper resistance. Recessed covered
controls secured with tamper-proof
fasteners, accessed only with tools. Power
indicating light. Self-contained evaporator
coil and blower refrigeration system. 1/3
H.P. air cooled high torque condensing unit,
thermal expansion valve, filter/dehydrator,
large capacity exchanger. Temperature
range of 34

O

to 40OF (1Oto 4OC).

Refrigerant charge of 25 oz. CFC-Free
R134a.

REFRIGERATION PERFORMANCE...

Capable of cooling cabinet to 34

O

F (1OC).

Approximate pull down time to 40

O

F is 30

minutes.

REFRIGERATOR ELECTRICAL
INFORMATION... Each module operates on

120 volts, Hz, 1 Ph, 830 watts 9 running
amps.

SINGLE POWER CORD... Refrigeration
systems connect to covered junction box.
Single ten foot 3 wire rubber cord with 3
prong grounding plug. NEMA 5-20P.

ACCESSORIES/OPTIONS...

Tow hitch (pin type)
Tray racks; universal slides for pans
Tray racks; for T-500 trays

CARTER-HOFFMANN

1551 McCormick Ave., Mundelein, IL 60060

[phone] • [phone] • Fax [phone]

www.carter-hoffmann.com

SPECIFICATIONS

Printed in U.S.A. CRR144 1212

Carter-Hoffmann is a trademark

of Carter-Hoffmann LLC

CORRECTIONAL TRANSPORT CART

DUAL REFRIGERATED

for Compartment Trays

FOOD SERVICE EQUIPMENT

HEATED TRANSPORT CARTS

CARTER-HOFFMANN

Specifications subject to change through product improvement & innovation

Model Cart Type Capacity (see chart above) Overall Dimensions Caster Shipping

Number Inside Working Height Height Width Depth Diameter Weight

(est.)

in (mm) in mm in mm in mm in mm lbs kg

CRR144 Heated/Refrigerated 47

1

/

2

(1207) 77

1

/

8

1959 60 1524 31

1

/

2

800 8 203 570 259

* Capacity varies according to tray size. Trays NOT included. Contact individual manufacturers for trays. SAMPLE TRAY(S) REQUIRED WITH ORDER.
** Optional tray racks required.

Manufacturer Tray Model Covered Tray Size (in.) Approx. Capacity* (each side)

Jones-Zylon 5000 Series 9.4 x 6.8 x 2.7 102
Jones Zylon 9000 Series 11 x 8.88 x 2.3 80
Plastocon 9113 11.19 x 9.19 x 2.75 68
Plastocon 9114 11.19 x 9.19 x 2.69 68
Design Specialties E-300 8.63 x 6.63 x 2 207
Design Spacilaties T-500 14 x 10.5 x 1.13 50**
Design Specialties FC-431 10.63 x 9.56 x 2.63 64
Design Specialties FC-442 10.63 x 9.56 x 2.63 64
Temp Tech T3 6.81 x 9.19 x 1.94 144
Temp Tech TK3 11.19 x 9.31 x 2.19 84
Temp Tech T3M 8.56 x 6.56 x 2.06 207
Temp Tech TVN3 9.44 x 6.81 x 2.5 108
Temp Tech TKM5 11.19 x 9.31 x 3.06 60
Cambro 853FCW 8.88 x 6.5 x 2.06 207
Cambro 853FHP 8.88 x 6.5 x 2.06 207
Cambro 853FH 8.88 x 6.5 x 2.06 207
Various Steam Table Pan 12” x 20” x 2.5” 30**
Various Bun Pan 18” x 26” x 1” 15**

Trays not included.
Contact individual
manufacturers for
trays. Sample tray(s)
required with order.

CRR144

shown with optional tow hitch

DURABLE DESIGN FOR
CORRECTIONAL ENVIRONMENT...

Heavy-duty features include tamper­resistant fasteners, all-welded
construction, with strap hinges and
concealed bottom to prevent
concealment on contraband.
Transport latch with padlock provision

LIFT-OFF REFRIGERATION
MODULES... Removable with tools;

secured in place with tamper-resistant
fasteners. Electric from each module
connected to junction box located
between the two systems. Power is
combined into single 20 amp power cord.

WHEEL-AHEAD CASTER
CONFIGURATION... For easy

moving over threshholds and
uneven seurfaces. Six semi­pneumatic 8” large diameter
casters for tight turning radius.

FULL PERIMETER BUMPER...

All aluminum with non-marking
gray vinyl insert to protect cart
and facility walls. Reinforced
with angle brackets and bolted
on to cabinet.

RECESSED PUSH HANDLES...

Welded and bolted to cabinet. Flush
with cabinet exterior for safety.

FEATURES & BENEFITS

1551 McCormick Avenue, Mundelein, Illinois 60060

Tel. [phone]

.

[phone]

.

Fax [phone]

www.carter-hoffmann.com

Since 1947, Foodservice Equipment That Delivers!

CORRECTIONAL TRANSPORT CART

DUAL REFRIGERATED

for Compartment Trays

CRR144

Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’

CRR144

Front View

CRR144

Side View

CRR144

Top View

REFRIGERATION MODULE CONTROLS...

Electronic controls with digital display.
Programmable temperature settings.
Refrigeration control has manual override for
defost cycle.

OPTIONAL PAN RACKS...

Welded on extended angle slides
at 3”spacing for 12”x20”x2.5”
steam table pans and 18”x26”
sheet pans (shown); pan racks for
Design Specialties T-500 trays
(not shown)