Page 1
CONSTRUCTION...Completely welded
cabinet construction and top corners, with
outer cabinet formed to base and welded.
All seams turned in to eliminate raw edges.
All exposed fasteners are tamper resistant.
No open crevices or holes. Cabinet divided
into two parts with insulated divider between
the sections.
CABINET MATERIAL...300 series stainless
steel construction; 18 gauge polished
exterior and 18 gauge interior.
BASE FRAME...12 gauge stainless steel full
depth bolsters with 1”x1” 16 gauge stainless
steel perimeter tube supports welded to
bolsters. Bottom of cabinet completely
covered to deter concealed contraband.
CASTERS...Six 8” diameter, industrial grade
semi-pneumatic casters. Sealed roller
bearing and double ball bearing swivel.
Zerk grease fittings. Plate mounted and
secured to base with tamper-resistant
fasteners and hub threads. Offset wheelahead pattern. 4 swivel (corners); 2 rigid
(center).
BUMPER... Heavy-duty 1/8 aluminum base
with non-marking gray vinyl insert.
Reinforced with brackets bolted and welded
to body of cabinet. Additional reinforcements
from bottom of bumper welded to base of
cabinet.
INSULATION...Heated side: 2” thick high
density fiberglass insulation in sides, bottom
& top. Refrigerated side: 1” foam board and
1” thick high density fiberglass insulation in
top, bottom, sides and center wall.
DOORS...Non-removable, welded double
panel stainless steel; 18 gauge polished
exterior and 18 gauge interior. Filled with
fiberglass insulation. 270Odoor swing.
Latchless design with magnetic closures.
HINGES...Heavy-duty 12 gauge stainless
steel strap hinges with 3/8” stainless steel
pins welded to each door and cabinet
TRANSPORT LATCH...Welded-on 12
gauge stainless steel transport latch with
padlock provision.
PUSH HANDLES... Two 3/4” recessed
horizontal full width stainless steel tubular
push handles with back up plates. Set in 18
gauge recessed housing, reinforced and
welded in place.
NESTED TRAY TRANSPORT... Covered
trays nest and stack on floor. Optional tray
racks for 12x20x2.5” or 18”x26” sheet pans
(6” extended angle slides at 3” spacing)
available.
THERMOMETERS...Heated and
refrigerated sections feature digital display
with remote sensing bulb.
HEATING MODULE...Top mounted heating
system, removable with tools. Digital
temperature control and display. Reinforced
cord grip. Inconel-sheathed heating element.
High impedence, inernally cooled fan motor.
Full range thermostat concealed for tamperresistance. Power indicating light. Recessed
covered controls secured with tamper-proof
fasteners, accessed only with tools.
HEATER ELECTRICAL INFORMATION..
Operates on 120 volts, 60 Hz, 1Ph, 1000
watts, 8 amps.
HEATER PERFORMANCE... Baffle system
to assure uniform heat distribution. Factory
pre-set temperature of 175
O
F (79OC).
Capable of heating to 200
O
F (94OC).
Preheat to 175
O
F (79OC) in approximately
25 minutes.
REFRIGERATION MODULE... Top mounted
self-contained refrigeration system,
removable without tools. Digital temperature
control and display. Concealed thermostat
for tamper resistance. Recessed covered
controls secured with tamper-proof
fasteners, accessed only with tools. Power
indicating light. Self-contained evaporator
coil and blower refrigeration system. 1/3
H.P. air cooled high torque condensing unit,
thermal expansion valve, filter/dehydrator,
large capacity exchanger. Temperature set
point of 34
O
to 40OF (1Oto 4OC). Refrigerant
charge of 25 oz. CFC-Free R134a.
REFRIGERATION PERFORMANCE...
Capable of cooling cabinet to 34
O
F (1OC).
Approximate pull down time to 40
O
F is 30
minutes.
REFRIGERATOR ELECTRICAL
INFORMATION... 120 volts, Hz, 1 Ph, 830
watts 9 running amps.
SINGLE POWER CORD... Refrigeration and
heating system connect to covered junction
box. Single ten foot 3 wire rubber cord with
3 prong grounding plug. NEMA 5-20P.
ACCESSORIES/OPTIONS...
Tow hitch (pin type)
Tray racks; universal slides for pans
Tray racks; for T-500 trays
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
SPECIFICATIONS
Printed in U.S.A. CHR120 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
CORRECTIONAL TRANSPORT CART
COMBINATION HEATED & REFRIGERATED
for Compartment Trays
FOOD SERVICE EQUIPMENT
HEATED TRANSPORT CARTS
CARTER-HOFFMANN
Specifications subject
to change through
product improvement &
innovation
Model Cart Type Capacity (see chart above) Overall Dimensions Caster Shipping
Number Inside Working Height Height Width Depth Diameter Weight
(est.)
in (mm) in mm in mm in mm in mm lbs kg
CHR120 Heated/Refrigerated 40
3
/
4
(1207mm) 69
1
/
2
1765 60 1524 31
1
/
2
800 8 203 520 236
* Capacity varies according to tray size. Trays NOT included. Contact individual manufacturers for trays. SAMPLE TRAY(S) REQUIRED WITH ORDER.
** Optional tray racks required.
Manufacturer Tray Model Covered Tray Size (in.) Hot Side Capacity Cold Side
Jones-Zylon 5000 Series 9.4 x 6.8 x 2.7 90 90
Jones Zylon 9000 Series 11 x 8.88 x 2.3 68 68
Plastocon 9113 11.19 x 9.19 x 2.75 56 56
Plastocon 9114 11.19 x 9.19 x 2.69 60 60
Design Specialties E-300 8.63 x 6.63 x 2 162 153
Design Specialties T-500 14 x 10.5 x 1.13 46** 46**
Design Specialties FC-431 10.63 x 9.56 x 2.63 56 56
Design Specialties FC-442 10.63 x 9.56 x 2.63 56 56
Temp Tech T3 6.81 x 9.19 x 1.94 120 120
Temp Tech TK3 11.19 x 9.31 x 2.19 72 72
Temp Tech T3M 8.56 x 6.56 x 2.06 171 171
Temp Tech TVN3 9.44 x 6.81 x 2.5 96 96
Temp Tech TKM5 11.19 x 9.31 x 3.06 52 52
Cambro 853FCW 8.88 x 6.5 x 2.06 114 171
Cambro 853FHP 8.88 x 6.5 x 2.06 114 171
Cambro 853FH 8.88 x 6.5 x 2.06 114 171
Various Steam Table Pan 12” x 20” x 2.5” 24** 24**
Various Bun Pan 18” x 26” x 1” 12** 12**
CHR120
shown with optional tow hitch
Page 2
DURABLE DESIGN FOR
CORRECTIONAL ENVIRONMENT...
Heavy-duty features include tamperresistant fasteners, all-welded
construction, with strap hinges and
concealed bottom to prevent
concealment on contraband.
Transport latch with padlock provision
LIFT-OFF HEATER AND
REFRIGERATION MODULES...
Removable with tools; secured in place
with tamper-resistant fasteners. Electric
from each module connected to junction
box located between the two systems.
Power is combined into single 20 amp
power cord.
WHEEL-AHEAD CASTER
CONFIGURATION... For easy
moving over threshholds and
uneven seurfaces. Six semipneumatic 8” large diameter
casters for tight turning radius.
FULL PERIMETER BUMPER...
All aluminum with non-marking
gray vinyl insert to protect cart
and facility walls. Reinforced
with angle brackets and bolted
on to cabinet.
RECESSED PUSH HANDLES...
Welded and bolted to cabinet. Flush
with cabinet exterior for safety.
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
CORRECTIONAL TRANSPORT CART
COMBINATION HEATED & REFRIGERATED
for Compartment Trays
CHR120
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
CHR120
Front View
CHR120
Side View
CHR120
Top View
Heated
Side
Refrigerated
Side
OPTIONAL PAN RACKS... Welded on
extended angle slides at 3” spacing for
12”x20”x2.5” steam table pans and
18”x26” sheet pans (shown); pan racks for
uncovered Design Specialties T-500 trays
(not shown)
HEATER & REFRIGERATION MODULE CONTROLS...
Electronic controls with digital display. Programmable
temperature settings. Refrigeration control has manual
override for defost cycle.
Loading...