SPECIFICATIONS
Printed in U.S.A. E70 0211
Carter-Hoffmann is a trademark of
Carter-Hoffmann LLC
CNH SERIES
CRISP ‘N HOLD CRISPY FOOD STATIONS
(with forced air heating system)
CONSTRUCTION...Welded cabinet
construction with outer cabinet welded to
cabinet liner. Fasteners attach top and
back panels for access to heater
components. Rear-mounted cord with
stainless steel cord wrap.
CABINET MATERIAL...All stainless steel
construction: 20 gauge polished exterior
and 20 gauge interior. High temperature
polycarbonate rail on front of cabinet to
minimize hot surface temperatures in
serving area.
INSULATION...High density fiberglass,
full 1” thick continuous wrap-around type
in bottom and sides.
FOOD BAY... Removable all stainless
steel food grate. Embossed surface with
precision engineered holes to allow even
heating. Slotted to accommodate
stainless steel product dividers: one
divider provided with CNH14, two
provided with CNH18 and three provided
with CNH28. “XD” models are 4” longer
for added food bay capacity.
FILTER...Removable filter traps oils.
Dishwasher-safe.
COLLECTION PAN... Integrated bottom
mounted pan collects excess oils and
pulls out for cleaning.
LEGS... 1” rubber feet on CNH14 and
CNH18. 4” legs on CNH28 (NSF
requirement).
CONTROLS...Electrcial mechanical
thermostat mounted inside electrical
portion of cabinet. Factory preset
temperature of 190OF (88OC). Accessible
with tools. On/off toggle switch with
rubber boot.
HEATING SYSTEM...Forced air heating
system located in rear housing. Motor
isolated from heated air for extended life.
Electrical resistance 900 watt heaters
with forced air blowers and ducts to direct
warm air. Heated air is discharged
through circular openings in the bottom of
a grate. Grate embossed with circular
texture to reduce hot metal contact with
food.
ELECTRICAL CHARACTERISTICS...
CNH14 and CNH18 operate on 120 volts,
1820 watts, 15.1 amps, 60 Hz, single
phase. NEMA 5-20P. CNH28 operates
on 208 volts, 2890 watts, 14 amps, 60
Hz, single phase. NEMA 6-20P. Six foot
rubber cord with grounded plug.
PERFORMANCE...Capable of heating to
190OF (88OC). Preheat to 190OF (88OC)
in approximately 10 minutes.
ACCESSORIES/OPTIONS...
240 volt electrical configuration
Additional product dividers
Fry scoop holder
Fry bag holder
Specifications subject to change through product improvement & innovation.
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
Tel (847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Capacity Overall Dimensions Number of Sections Shipping
Number Height Depth Width
(with all product Weight
Cubic Inches in mm in mm in mm
dividers installed) lbs kgs
CHN14 837 17
3
/4451 29 737 141/
4
362 2 60 25
CNH18 1050 17
3
/4451 29 737 179/
16
446 3 67 30
CNH28 1780 20
3
/4* 527 29 737 281/
8
714 4 98 44
CNH14XD 1045 17
3
/4451 33 838 141/
4
362 2 65 29
CNH18XD 1306 17
3
/4451 33 838 179/
16
446 3 72 33
CNH28XD 2196 20
3
/4* 527 33 838 281/
8
714 4 103 47
FOOD SERVICE EQUIPMENT
FRIED FOOD STATIONS
CARTER-HOFFMANN
* Height includes 4” legs (NSF requirement for units over 80 lbs).
CNH14
Front
View
CNH18
Front
View
CNH28
Front
View
CNH14
Top View
CNH18
Top View
CNH28
Top View
All Models
Side View
CNH18
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
CNH SERIES
CRISPY FOOD STATIONS
Since 1947, Foodservice Equipment That Delivers!
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel (847)362-5500
.
(800) 323-9793
.
Fax (847) 367-8981
www.carter-hoffmann.com
EXCLUSIVE HEATER DESIGN... Heater components isolated in rear of cabinet, protected from oil
migration. Provides a stream of warm air to maintain crispy food serving temperatures and extend
holding time. Warm air is forced through bottom food grate and drawn through filter to maintain
constant circulation and warm blanket over and through the food. Controls moisture accumulation
and maintains food crispness. Extends the life of fried food by as much as 4 times over heat lamps.
Factory pre-set temperature of 190
o
F. Internal thermostat accessible with tools for adjustment.
LARGE FOOD BAY..
Precision engineered food
holes and textured pattern
to minimize hot metal
contact with food and
optimize air circulation.
Product tray and dividers
are removable for easy
cleaning. “XD” models are
4” longer for added food
bay capacity.
STAINLESS STEEL
CONSTRUCTION... All
stainless steel for durable
wear and easy cleaning.
Rear-mounted cord wrap
to stow excess cord when
not needed.
COLLECTION PAN... Fully
integrated, bottom mounted
pan collects excess oil drawn
away from the food to keep
food crisp. Removable for
easy cleaning.
EXPANDED HOLDING...
Product dividers expand
holding capability by dividing
food bay into separate
compartments for multiple
products. Or take them all
out to create one large bay
to hold more of a single
product.
REMOVABLE OIL FILTER...
Exclusive design collects oil
and vapors and protects
heater components from oil
accumulation. Easily removed
for cleaning. Dishwasher safe.
CNH28
COUNTER-TOP
DESIGN... Unit can be
placed on any counter
top, eliminating the need
for heat lamps.
COOL RIM...
Polycarbonate bar
mounted to front of
cabinet stays cool to
touch and protects users
from burns.
Loading...