CONSTRUCTION...Completely welded
cabinet construction and top corners, with
outer cabinet formed to base and welded.
All seams turned in to eliminate raw edges.
All exposed fasteners are tamper resistant.
No open crevices or holes. Cabinet divided
into two parts with insulated divider between
the sections.
CABINET MATERIAL...300 series stainless
steel construction; 18 gauge polished
exterior and 18 gauge interior.
BASE FRAME...12 gauge stainless steel full
depth bolsters with 1”x1” 16 gauge stainless
steel perimeter tube supports welded to
bolsters. Bottom of cabinet completely
covered to deter concealed contraband.
CASTERS...Six 8” diameter, industrial grade
semi-pneumatic casters. Sealed roller
bearing and double ball bearing swivel.
Zerk grease fittings. Plate mounted and
secured to base with tamper-resistant
fasteners and hub threads. Offset wheelahead pattern. 4 swivel (corners); 2 rigid
(center).
BUMPER... Heavy-duty 1/8 aluminum base
with non-marking gray vinyl insert.
Reinforced with brackets bolted and welded
to body of cabinet. Additional reinforcements
from bottom of bumper welded to base of
cabinet.
INSULATION...High density fiberglass
insulation. 2” thick in sides, bottom, top,
doors & center wall.
DOORS...Non-removable, welded double
panel stainless steel; 18 gauge polished
exterior and 18 gauge interior. Filled with
fiberglass insulation. 270 degree door
swing. Latchless design with magnetic
closures.
HINGES...Heavy-duty 12 gauge stainless
steel strap hinges with 3/8” stainless steel
pins welded to each door and cabinet
TRANSPORT LATCH...Welded-on 12
gauge stainless steel transport latch with
padlock provision.
PUSH HANDLES... Two 3/4” recessed
horizontal full width stainless steel tubular
push handles with back up plates. Set in 18
gauge recessed housing, reinforced and
welded in place.
NESTED TRAY TRANSPORT... Covered
trays nest and stack on floor. Optional tray
racks or tray retention system available.
THERMOMETERS...Each heater features
digital display with remote sensing bulb.
HEATING MODULES...Top mounted
heating systems, removable with tools.
Digital temperature control and display.
Reinforced cord grip. Inconel-sheathed
heating element. High impedence, inernally
cooled fan motor. Full range thermostat
concealed for tamper-resistance. Power
indicating light. Recessed covered controls
secured with tamper-proof fasteners,
accessed only with tools.
HEATER ELECTRICAL INFORMATION..
Each heater operates on 120 volts, 60 Hz,
1Ph, 1000 watts, 8 amps.
HEATER PERFORMANCE... Baffle system
to assure uniform heat distribution. Factory
pre-set temperature of 175
O
F (79OC).
Capable of heating to 200
O
F (94OC).
Preheat to 175
O
F (79OC) in approximately
25 minutes.
SINGLE POWER CORD... Heating systems
connect to covered junction box. Single ten
foot 3 wire rubber cord with 3 prong
grounding plug. NEMA 5-20P.
ACCESSORIES/OPTIONS...
Tow hitch (pin type)
Tray racks; universal slides for pans
Tray racks; for T-500 trays
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
SPECIFICATIONS
Printed in U.S.A. CHH144 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
CORRECTIONAL TRANSPORT CART
DUAL HEATED
for Compartment Trays
FOOD SERVICE EQUIPMENT
HEATED TRANSPORT CARTS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation
Model Cart Type Capacity (see chart above) Overall Dimensions Caster Shipping
Number Inside Working Height Height Width Depth Diameter Weight
(est.)
in (mm) in mm in mm in mm in mm lbs kg
CHH144 Heated/Heated 47
1
/
2
(1207) 68
3
/
8
1736 60 1308 31
1
/
2
800 8 203 530 240
CHH144
shown with optional tow hitch
* Capacity varies according to tray size. Trays NOT included. Contact individual manufacturers for trays. SAMPLE TRAY(S) REQUIRED WITH ORDER.
** Optional tray racks required.
Manufacturer Tray Model Covered Tray Size (in.) Capacity Each Side
Jones-Zylon 5000 Series 9.4 x 6.8 x 2.7 120
Jones Zylon 9000 Series 11 x 8.88 x 2.3 80
Plastocon 9113 11.19 x 9.19 x 2.75 68
Plastocon 9114 11.19 x 9.19 x 2.69 68
Design Specialties E-300 8.63 x 6.63 x 2 207
Design Specialties T-500 14 x 10.5 x 1.13 50**
Design Specialties FC-431 10.63 x 9.56 x 2.63 64
Design Specialties FC-442 10.63 x 9.56 x 2.63 64
Temp Tech T3 6.81 x 9.19 x 1.94 144
Temp Tech TK3 11.19 x 9.31 x 2.19 84
Temp Tech T3M 8.56 x 6.56 x 2.06 207
Temp Tech TVN3 9.44 x 6.81 x 2.5 108
Temp Tech TKM5 11.19 x 9.31 x 3.06 60
Cambro 853FCW 8.88 x 6.5 x 2.06 138
Cambro 853FHP 8.88 x 6.5 x 2.06 138
Cambro 853FH 8.88 x 6.5 x 2.06 138
Various Steam Table Pan 12” x 20” x 2.5” 30**
Various Bun Pan 18” x 26” x 1” 15**