Carter Hoffman CHA144 User Manual

CONSTRUCTION...Completely welded

cabinet construction and top corners, with
outer cabinet formed to base and welded.
All seams turned in to eliminate raw edges.
All exposed fasteners are tamper resistant.
No open crevices or holes. Cabinet divided
into two parts with insulated divider between
the sections.

CABINET MATERIAL...300 series stainless
steel construction; 18 gauge polished
exterior and 18 gauge interior.

BASE FRAME...12 gauge stainless steel full
depth bolsters with 1”x1” 16 gauge stainless
steel perimeter tube supports welded to
bolsters. Bottom of cabinet completely
covered to deter concealed contraband.

CASTERS...Six 8” diameter, industrial grade
semi-pneumatic casters. Sealed roller
bearing and double ball bearing swivel.
Zerk grease fittings. Plate mounted and
secured to base with tamper-resistant
fasteners and hub threads. Offset wheel­ahead pattern. 4 swivel (corners); 2 rigid
(center).

BUMPER... Heavy-duty 1/8 aluminum base
with non-marking gray vinyl insert.
Reinforced with brackets bolted and welded
to body of cabinet. Additional reinforcements
from bottom of bumper welded to base of
cabinet.

INSULATION...High density fiberglass
insulation. 2” thick in sides, top, bottom and
center wall.

DOORS...Non-removable, welded double
panel stainless steel; 18 gauge polished
exterior and 18 gauge interior. Filled with
fiberglass insulation. 270Odoor swing.
Latchless design with magnetic closures.

HINGES...Heavy-duty 12 gauge stainless
steel strap hinges with 3/8” stainless steel
pins welded to each door and cabinet

TRANSPORT LATCH...Welded-on 12
gauge stainless steel transport latch with
padlock provision.

PUSH HANDLES... Two 3/4” recessed
horizontal full width stainless steel tubular
push handles with back up plates. Set in 18
gauge recessed housing, reinforced and
welded in place.

NESTED TRAY TRANSPORT... Covered
trays nest and stack on floor. Optional tray
racks for 12x20x2.5” or 18”x26” pans or
Design Specialties T-500 meal trays.

THERMOMETER...Features digital display
with remote sensing bulb.

HEATING MODULE...Top mounted heating
system, removable with tools. Digital
temperature control and display. Reinforced
cord grip. Inconel-sheathed heating element.
High impedence, inernally cooled fan motor.
Full range thermostat concealed for tamper­resistance. Power indicating light. Recessed
covered controls secured with tamper-proof
fasteners, accessed only with tools.

HEATER ELECTRICAL INFORMATION..

Operates on 120 volts, 60 Hz, 1Ph, 1000
watts, 8 amps.

HEATER PERFORMANCE... Baffle system
to assure uniform heat distribution. Factory
pre-set temperature of 175

O

F (79OC).

Capable of heating to 200

O

F (94OC).

Preheat to 175

O

F (79OC) in approximately

25 minutes.

SINGLE POWER CORD... Heating system
connects to covered junction box. Single ten
foot 3 wire rubber cord with 3 prong
grounding plug. NEMA 5-20P.

ACCESSORIES/OPTIONS...

Tow hitch (pin type)
Tray racks; universal slides for pans
Tray racks; for T-500 trays

CARTER-HOFFMANN

1551 McCormick Ave., Mundelein, IL 60060

[phone] • [phone] • Fax [phone]

www.carter-hoffmann.com

SPECIFICATIONS

Printed in U.S.A. CHA120 1212

Carter-Hoffmann is a trademark

of Carter-Hoffmann LLC

CORRECTIONAL TRANSPORT CART

COMBINATION HEATED & AMBIENT

for Compartment Trays

FOOD SERVICE EQUIPMENT

HEATED TRANSPORT CARTS

CARTER-HOFFMANN

Specifications subject to change through product improvement & innovation

Model Cart Type Capacity (see chart above) Overall Dimensions Caster Shipping

Number Inside Working Height Height Width Depth Diameter Weight

(est.)

in (mm) in mm in mm in mm in mm lbs kg

CHA144 Heated/Ambient 47

1

/

2

(1207) 68

3

/

8

1736 60 1524 31

1

/

2

800 8 203 480 218

* Capacity varies according to tray size. Trays NOT included. Contact individual manufacturers for trays. SAMPLE TRAY(S) REQUIRED WITH ORDER.
** Optional tray racks required.

Manufacturer Tray Model Covered Tray Size (in.) Approx. Capacity* (each side)

Jones-Zylon 5000 Series 9.4 x 6.8 x 2.7 102
Jones Zylon 9000 Series 11 x 8.88 x 2.3 80
Plastocon 9113 11.19 x 9.19 x 2.75 68
Plastocon 9114 11.19 x 9.19 x 2.69 68
Design Specialties E-300 8.63 x 6.63 x 2 207
Design Specialties T-500 14 x 10.5 x 1.13 50**
Design Specialties FC-431 10.63 x 9.56 x 2.63 64
Design Specialties FC-442 10.63 x 9.56 x 2.63 64
Temp Tech T3 6.81 x 9.19 x 1.94 144
Temp Tech TK3 11.19 x 9.31 x 2.19 84
Temp Tech T3M 8.56 x 6.56 x 2.06 207
Temp Tech TVN3 9.44 x 6.81 x 2.5 108
Temp Tech TKM5 11.19 x 9.31 x 3.06 60
Cambro 853FCW 8.88 x 6.5 x 2.06 138
Cambro 853FHP 8.88 x 6.5 x 2.06 138
Cambro 853FH 8.88 x 6.5 x 2.06 138
Various Steam Table Pan 12” x 20” x 2.5” 30**
Various Bun Pan 18” x 26” x 1” 15**

Trays not included.
Contact individual
manufacturers for
trays. Sample tray(s)
required with order.

CHA144

shown with optional tow hitch

DURABLE DESIGN FOR
CORRECTIONAL ENVIRONMENT...

Heavy-duty features include tamper­resistant fasteners, all-welded
construction, with strap hinges and
concealed bottom to prevent
concealment on contraband.
Transport latch with padlock provision

LIFT OFF HEATER MODULE...

Removable with tools. Ambient section
to have stainless steel filler plate,
secured in place with tamper-resistant
fasteners. Electric connected to junction
box. Power is combined into single 20
amp power cord.

WHEEL-AHEAD CASTER
CONFIGURATION... For easy

moving over threshholds and
uneven seurfaces. Six semi­pneumatic 8” large diameter
casters for tight turning radius.

FULL PERIMETER BUMPER...

All aluminum with non-marking
gray vinyl insert to protect cart
and facility walls. Reinforced
with angle brackets and bolted
on to cabinet.

RECESSED PUSH HANDLES...

Welded and bolted to cabinet. Flush
with cabinet exterior for safety.

FEATURES & BENEFITS

1551 McCormick Avenue, Mundelein, Illinois 60060

Tel. [phone]

.

[phone]

.

Fax [phone]

www.carter-hoffmann.com

Since 1947, Foodservice Equipment That Delivers!

CORRECTIONAL TRANSPORT CART

COMBINATION HEATED & AMBIENT

for Compartment Trays

CHA144

Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’

CHA144

Front View

CHA144

Side View

CHA144

Top View

Heated

Side

Ambient

Side

OPTIONAL PAN RACKS... Welded
on extended angle slides at 3”
spacing for 12”x20”x2.5” steam table
pans and 18”x26” sheet pans
(shown); pan racks for uncovered
Design Specialties T-500 trays (not
shown).

HEATER MODULE CONTROLS...

Electronic controls with digital
display. Programmable
temperature settings.