SPECIFICATIONS
Printed in U.S.A. H20 0114
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
CH600, CH900 & CH1800
COOK & HOLD CABINETS
Cook to Time or Product Temperature
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to base. All seams turned in to
eliminate raw edges.
Gray vinyl bumper set
in channel on each side of cabinet.
CABINET MATERIAL...All stainless steel
double-wall, insulated construction.
BASE FRAME...stainless steel full depth
caster bolsters with stainless steel perimeter
supports welded to bolsters.
CASTERS...5” diameter casters with rubber
tread. Double ball bearing swivel. Zerk
grease fittings. Plate mounted and bolted to
base. Two casters fitted with brakes.
INSULATION...2” thick high density
continuous wrap-around type fiberglass
insulation.
DOOR...Welded double panel stainless steel
door; turned-in seam pocket construction.
Filled with 2” thick high density fiberglass
insulation. Field reversible. Dutch doors are
standard on CH18.
HINGES...Adjustable self-closing,
edgemount hinges with chrome plate finish.
GASKET...High temperature silicone gasket
mounted to cabinet.
LATCH...Heavy-duty edgemount latch with
magnetic catch.
TRAY RACK ASSEMBLIES...Removable
stainless steel tray racks with solid stainless
steel angle slides. Slides welded to
assemblies and spaced on 3” centers.
THERMOMETER...Digital thermometer with
remote sensing bulb for cabinet operating
temperature. Digital temperature displays in
temperature window of current mode (cook
or hold) by pushing “view actual temp”
button.
CONTROLS...User-friendly digital controls
with digital readout displays for settings.
Includes meat probe. Cook to time or
product temperature. Master on/off switch
with “start/cancel” button for cook cycles.
Touchpad to view actual temperature.
Separate controls & displays for cook
temperature and hold temperature. Eighteen
hour digital timer display shows cook
temperature in count down mode during
cook cycle. During hold cycle, automatically
switches to count up.
HEATING SYSTEM...Top mounted, built-in,
blower heater for even heat distribution.
High impedence protected, internally cooled
fan motor. Full range thermostat and on/off
switch with power indicating light and
“start/cancel” button. Water pan in top of
cabinet provides passive humidification.
HEAT DUCT SYSTEM... Side-mounted
precision engineered interior heat duct
system to provide gentle heat circulation
throughout cabinet to caramelize roasts for
less food shrinkage and more attractive
appearance.
ELECTRICAL CHARACTERISTICS...
All models are 60hz, single phase.
PERFORMANCE...Capable of slow cooking
to a maximum temperature of 325
O
F (161
O
C). Capable of holding at a range of 100OF
(38
O
C) to 200OF (93OC). Preheat to 160OF
(71
O
C) in approximately 25 minutes.
Temperature variance less than 5
O
F(3OC),
top to bottom.
ACCESSORIES/OPTIONS...
Legs in lieu of casters
Menu card holder
Tamper resistant fasteners
Locking door latch
208 volt operation, all models
120 volt operation, CH600 & CH900 only
230 volt CE operation
Wire shelves to accommodate 12”x20” pans
Model Capacity* Approximate Spacing Inside Working Overall Dimensions Caster Shipping
Number 18”x26” Meat Height Height Depth Width Diameter Weight
Trays Capacity in mm in mm in mm in mm in mm in mm lbs kg
CH600 6 80 lbs 3 76 18
1
/
8
460 38
1
/
2
948 32
3
/
4
832 26
1
/
8
664 5 127 312 142
CH900 9 120 lbs 3 76 27
1
/
4
692 47
1
/
2
1207 32
3
/
4
832 26
1
/
8
664 5 127 344 156
CH1800 18 240 lbs 3 76 54
1
/
2
1384 78 1981 32
3
/
4
832 26
1
/
8
664 5 127 460 209
FOOD SERVICE EQUIPMENT
COOK & HOLD CABINETS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation.
CH600
Front View
CH1800
Front View
All Models
Top View
CH1800
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
CH900
Front View
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Volts Watts Amps Plug
CH600 240 3200 13.3 NEMA 6-20P
CH900 240 3200 13.3 NEMA 6-20P
CH1800 240 6200 25.8 NEMA 6-30P
*Also accommodate 12”x20”x2.5” pans on optional wire shelves; 1 per shelf, end-loaded. Capacity is the same as 18”x26” trays.