CONSTRUCTION...Completely welded
cabinet construction and top corners, with
outer cabinet formed to base and welded.
All seams turned in to eliminate raw edges.
All exposed fasteners are tamper resistant.
No open crevices or holes. Cabinet divided
into two parts with foam insulated divider
between the sections.
CABINET MATERIAL...300 series stainless
steel construction; 18 gauge polished
exterior and 18 gauge interior.
BASE FRAME...12 gauge stainless steel full
depth bolsters with 1”x1” 16 gauge stainless
steel perimeter tube supports welded to
bolsters. Bottom of cabinet completely
covered to deter concealed contraband.
CASTERS...Six 8” diameter, industrial grade
semi-pneumatic casters. Sealed roller
bearing and double ball bearing swivel.
Zerk grease fittings. Plate mounted and
secured to base with tamper-resistant
fasteners and hub threads. Offset wheelahead pattern. 4 swivel (corners); 2 rigid
(center).
BUMPER... Heavy-duty 1/8 aluminum base
with non-marking gray vinyl insert.
Reinforced with brackets bolted and welded
to body of cabinet. Additional reinforcements
from bottom of bumper welded to base of
cabinet.
INSULATION...High density fiberglass
insulation. 2” thick wraparound in sides,
bottom, top, doors & center wall.
DOORS...Non-removable, welded double
panel stainless steel; 18 gauge polished
exterior and 18 gauge interior. Filled with
fiberglass insulation. 270 degree door
swing. Latchless design with magnetic
closures.
HINGES...Heavy-duty 12 gauge stainless
steel strap hinges with 3/8” stainless steel
pins welded to each door and cabinet
TRANSPORT LATCH...Welded-on 12
gauge stainless steel transport latch with
padlock provision.
PUSH HANDLES... Two 3/4” recessed
horizontal full width stainless steel tubular
push handles with back up plates. Set in 18
gauge recessed housing, reinforced and
welded in place.
NESTED TRAY TRANSPORT... Covered
trays nest and stack on floor. Optional tray
racks for 12x20x2.5” or 18”x26” sheet pans
or Design Specialties T-500 meal trays.
ACCESSORIES/OPTIONS...
Tow hitch (pin type)
Tray racks; universal slides for pans
Tray racks; for T-500 trays
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
SPECIFICATIONS
Printed in U.S.A. CAA144 1212
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
CORRECTIONAL TRANSPORT CART
AMBIENT
for Compartment Trays
FOOD SERVICE EQUIPMENT
HEATED TRANSPORT CARTS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation
Model Cart Type Capacity (see chart above) Overall Dimensions Caster Shipping
Number Inside Working Height Height Width Depth Diameter Weight
(est.)
in (mm) in mm in mm in mm in mm lbs kg
CAA144 Ambient/Ambient 47
1
/
2
(1207) 62
3
/
8
1584 60 1524 31
1
/
2
800 8 203 430 195
* Capacity varies according to tray size. Trays NOT included. Contact individual manufacturers for trays. SAMPLE TRAY(S) REQUIRED WITH ORDER.
** Optional tray racks required.
Manufacturer Tray Model Covered Tray Size (in.) Approx. Capacity* (each side)
Jones-Zylon 5000 Series 9.4 x 6.8 x 2.7 102
Jones Zylon 9000 Series 11 x 8.88 x 2.3 80
Plastocon 9113 11.19 x 9.19 x 2.75 68
Plastocon 9114 11.19 x 9.19 x 2.69 68
Design Specialties E-300 8.63 x 6.63 x 2 207
Design Specialties T-500 14 x 10.5 x 1.13 50**
Design Specialties FC-431 10.63 x 9.56 x 2.63 64
Design Specialties FC-442 10.63 x 9.56 x 2.63 64
Temp Tech T3 6.81 x 9.19 x 1.94 144
Temp Tech TK3 11.19 x 9.31 x 2.19 84
Temp Tech T3M 8.56 x 6.56 x 2.06 207
Temp Tech TVN3 9.44 x 6.81 x 2.5 108
Temp Tech TKM5 11.19 x 9.31 x 3.06 60
Cambro 853FCW 8.88 x 6.5 x 2.06 138
Cambro 853FHP 8.88 x 6.5 x 2.06 138
Cambro 853FH 8.88 x 6.5 x 2.06 138
Various Steam Table Pan 12” x 20” x 2.5” 30**
Various Bun Pan 18” x 26” x 1” 15**
Trays not included.
Contact individual
manufacturers for
trays. Sample tray(s)
required with order.
CAA144
shown with optional tow hitch
DURABLE DESIGN FOR
CORRECTIONAL ENVIRONMENT...
Heavy-duty features include tamperresistant fasteners, all-welded
construction, with strap hinges and
concealed bottom to prevent
concealment on contraband.
Transport latch with padlock provision
WHEEL-AHEAD CASTER
CONFIGURATION... For easy
moving over threshholds and
uneven seurfaces. Six semipneumatic 8” large diameter
casters for tight turning radius.
FULL PERIMETER BUMPER...
All aluminum with non-marking
gray vinyl insert to protect cart
and facility walls. Reinforced
with angle brackets and bolted
on to cabinet.
RECESSED PUSH HANDLES...
Welded and bolted to cabinet. Flush
with cabinet exterior for safety.
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
CORRECTIONAL TRANSPORT CART
AMBIENT
for Compartment Trays
CAA144
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
CAA144
Front View
CAA144
Side View
CAA144
Top View
OPTIONAL PAN RACKS... Welded on extended angle slides at 3”
spacing for 12”x20”x2.5” steam table pans and 18”x26” sheet pans
(shown); pan racks for uncovered Design Specialties T-500 trays
(not shown)
Loading...