Page 1
SPECIFICATIONS
Printed in U.S.A. B07 0412
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
BR SERIES
ENDURAHEATTMBANQUET CARTERS
Heat Retention Carts For Preplated Banquet Meals
CONSTRUCTION...Completely welded
double wall cabinet construction with
outer cabinet formed and welded to base.
All seams turned in to eliminate raw
edges.
CABINET MATERIAL...All stainless steel
construction; polished exterior.
BASE FRAME...12 gauge stainless steel
full depth caster bolsters with 16 gauge
stainless steel square tubing welded to
bolsters.
CASTERS...6” diameter, industrial grade
balloon casters. Sealed roller axle
bearing and double ball bearing swivel.
Zerk grease fittings. Plate mounted and
bolted to base in offset “wheel ahead”
pattern. Two casters fitted with brakes.
BUMPER...Non-marking gray vinyl
bumper set in heavy-duty 3/16” thick
extruded aluminum frame with reinforced
corner cutouts. Reinforced with 12 gauge
angle bracket welded to cart and bolted
through bumper.
INSULATION...2” thick high density
continuous wrap-around type fiberglass
insulation.
GASKET...High temperature silicone
gasket mounted to cabinet.
DOORS...Welded double panel pocket
style stainless steel door. 20 gauge
polished exterior and 20 gauge interior.
Filled with 1
1
/
2
” thick high-density
fiberglass insulation. “No Canned Fuel”
decal.
HINGES...16 gauge stainless steel full
length 1” tubular hinge, mounted with 12
gauge stainless steel brackets and 16
gauge backup plates, with five 5/16-18
bolts and brass bushings.
PUSH HANDLES... Two 1” diameter
stainless steel tubular handles bolted to
cabinet with backup plates.
DOOR HANDLES & ROLLER
LATCHES...Two 1” diameter stainless
steel door handles mounted with backup
plates. Roller latches with stainless steel
strike plates.
TRANSPORT LATCH... Stainless steel
top mounted transport latch with padlock
provision; flips down to secure both
doors.
SHELVES...Welded, double nickel-plated
removable wire shelves.
THERMOMETER...Dial type with remote
sensing bulb and sensing bulb protector.
Mounted to center mullion.
HEATING SYSTEM...Bottom mounted
heater. Stainless steel construction with
black anodized exterior. Removable
without tools. 1900 watt inconelsheathed heating element. High
impedence protected, internally cooled
fan motor. Patented solid to solid phase
change heat retention material. 3-way
toggle switch for convection mode,
EnduraHeat mode or OFF. Full range
thermostat and power indicating lights for
convection heat mode and EnduraHeat
mode. Enduraheat charge ready light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1950 watts, 15.3 amps. Ten foot
power cord with reinforced cord grip and
3 prong grounding plug. NEMA 5-20P.
PERFORMANCE...Capable of heating to
200OF (94OC). Convection mode
preheat to 160
O
F (71OC) in
approximately 20 minutes. EnduraHeat
mode charge/preheat time to 180
O
F
(82
O
C) in approximately one hour.
ACCESSORIES/OPTIONS...
Lift-up pull handle
Alternate caster sizes & types
Alternate electrical configurations
Menu card holder (5”x7” or 8.5”x11”)
Donut style door bumpers
Swivel-lock casters
4 Wheel brakes
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Plate Capacity* Number Clearance Shelf Overall Dimensions Caster Shipping
Number (covered only) of Shelves Between Shelves Size Height Depth Width Diameter Weight
8
3
/
4
” - 11” dia. in mm in mm in mm in mm in mm in mm lbs kgs
BR96 96 3 13
1
/
4
337 22
1
/
8
x47 546x1194 60 1524 32
1
/
2
826 57
5
/
8
1464 6 152 504 229
BR120 120 3 16
1
/
2
419 22
1
/
8
x47 546x1194 69
3
/
4
1772 32
1
/
2
826 57
5
/
8
1464 6 152 557 253
BR150 150 3 16
1
/
2
419 22
1
/
8
x58
1
/
2
546x1486 69
3
/
4
1772 32
1
/
2
826 69
3
/
8
1762 6 152 582 264
*Capacity depends on stacking height of plates and covers (see “Clearance Between Shelves”). Maximum diameter includes cover. Due tot he wide
variety of plate thicknesses and depths, as well as plate cover heights, actual capacity may vary.
FOOD SERVICE EQUIPMENT
BANQUET CARTS
CARTER-HOFFMANN
US Patent Nos.
7,102,103 B2
& 7,394,042 B2
Carter-Hoffmann CAD Drawing Scale 1/4” = 1’
Specifications subject to
change through product
improvement &
innovation.
BR150
Front
View
BR96 & BR120
Top View
BR150
Top View
BR96 Front View BR120 Front View
Page 2
BR SERIES
ENDURAHEAT
TM
BANQUET CARTERS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
BALLOON TREAD CASTERS WITH SEALED ROLLER BEARING... Long lasting and easy rolling for
maximum load and minimum maintenance. Mounted to base in offset wheel-ahead pattern for easy rolling.
HIGH PERFORMANCE HEATER... Blower
system for fast heat up, recovery and even
heat distribution throughout cabinet. One
hour EnduraHeat charge/preheat time. 20
Minute preheat in convection mode. Toggle
switch to select convected heat or
EnduraHeat with indicator lights and
EnduraHeat ready light. Simple dial
controls for setting temperature.
Removable without tools for easy cleaning.
HEAVY-DUTY 1” STAINLESS
STEEL TUBULAR HINGE... Full
length eliminates torque on top
hinge. Mounted with 1” bushing
and 12 gauge stainless steel
mounting bracket. Keeps doors
properly aligned and withstands
rugged use.
NON-MARKING BUMPER SET IN
HEAVY-DUTY 3/16” THICK EXTRUDED
ALUMINUM FRAME... Protects doorways,
walls and cart from damage. Reinforced
with 12 gauge angle bracket for added
strength.
STAINLESS STEEL HANDLES
WITH ROLLER LATCH...
Stainless steel tubular handle for
comfortable grip. Mounted with
backup plates for added
durability. Roller latch design has
been a proven performer for over
10 years.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bolsters with
perimeter frame for rugged
use and added durability.
DOUBLE WALL,
COMPLETELY WELDED,
TURNED-IN SEAM
STAINLESS STEEL
CONSTRUCTION...
Strongest, most durable
materials for long life. High
density 2” thick fiberglass
insulation in walls, top, floor
and doors for maximum
heat retention. Turned-in
seams add rigidity to entire
cabinet and eliminates raw
edges for ease of cleaning
and safety.
BR120
PUSH HANDLES... 1” Tubular
stainless steel mounted to
cabinet with backup plates.
Designed for comfort grip and
easy steering.
WELDED, DOUBLE
NICKEL-PLATED
REMOVABLE WIRE
SHELVES WITH
REINFORCED SHELF
CLIPS... Wires run from
front to back for easier plate
loading and unloading.
Loading...