SPECIFICATIONS
Printed in U.S.A. B08 0412
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
BR1000
ENDURAHEATTMBANQUET CARTER
Heat Retention Carts For Preplated Banquet Meals
Large Plate Diameter up to 12 3/4”
CONSTRUCTION...Completely welded
double wall cabinet construction with
outer cabinet formed and welded to base.
All seams turned in to eliminate raw
edges.
CABINET MATERIAL...All stainless steel
construction; polished exterior.
BASE FRAME...12 gauge stainless steel
full depth caster bolsters with 16 gauge
stainless steel square tubing welded to
bolsters.
CASTERS...6” diameter, industrial grade
balloon casters. Sealed roller axle
bearing and double ball bearing swivel.
Zerk grease fittings. Plate mounted and
bolted to base in offset “wheel ahead”
pattern. Two casters fitted with brakes.
BUMPER...Non-marking gray vinyl
bumper set in heavy-duty 3/16” thick
extruded aluminum frame with reinforced
corner cutouts. Reinforced with 12 gauge
angle bracket welded to cart and bolted
through bumper.
INSULATION...2” thick high density
continuous wrap-around type fiberglass
insulation.
GASKET...High temperature silicone
gasket mounted to cabinet.
DOORS...Welded double panel pocket
style stainless steel door. 20 gauge
polished exterior and 20 gauge interior.
Filled with 1
1
/
2
” thick high-density
fiberglass insulation. “No Canned Fuel”
decal.
HINGES...16 gauge stainless steel full
length 1” tubular hinge, mounted with 12
gauge stainless steel brackets and 16
gauge backup plates, with five 5/16-18
bolts and brass bushings.
PUSH HANDLES... Two 1” gauge
diameter stainless steel tubular handles
bolted to cabinet with backup plates.
DOOR HANDLES & ROLLER
LATCHES...Two 1” diameter stainless
steel door handles mounted with backup
plates. Roller latches with stainless steel
strike plates.
TRANSPORT LATCH... Stainless steel
top mounted transport latch with padlock
provision; flips down to secure both
doors.
SHELVES...Welded, double nickel-plated
removable wire shelves.
THERMOMETER...Dial type with remote
sensing bulb and sensing bulb protector.
Mounted to center mullion.
HEATING SYSTEM...Bottom mounted
heater. Stainless steel construction with
black anodized exterior. Removable
without tools. 1900 watt inconelsheathed heating element. High
impedence protected, internally cooled
fan motor. Patented solid to solid phase
change heat retention material. Toggle
switch for convection mode, EnduraHeat
mode or OFF setting. Full range
thermostat and power indicating lights for
convection heat mode and EnduraHeat
mode. Enduraheat charge ready light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1950 watts, 15.3 amps. Ten foot
power cord with 3 prong grounding plug.
NEMA 5-20P.
PERFORMANCE...Capable of heating to
200OF (94OC). Preheat to 160OF (71OC)
in approximately 30 minutes.
EnduraHeat charge time in approximately
one hour.
ACCESSORIES/OPTIONS...
Lift-up pull handle
Alternate caster sizes & types
Alternate electrical configurations
Menu card holder (5”x7” or 8.5”x11”)
Donut style door bumpers
Swivel-lock casters
4 wheel brakes
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Plate Capacity* Number Clearance Shelf Overall Dimensions Caster Shipping
Number plate/cover dia of Shelves Between Shelves Size Height Depth Width Diameter Weight
8
3
/
4
-11”11
1
/
8
-12
3
/
4”
in mm in mm in mm in mm in mm in mm lbs kgs
BR1000 120 96 3 14
5
/
16
364 27
5
/
8
x59 702x1499 63
3
/
8
1610 37
7
/
8
962 69
3
/
8
1762 6 152 608 276
Carter-Hoffmann CAD DrawingScale: 1/4” = 1’
BR1000
FOOD SERVICE EQUIPMENT
BANQUET CARTS
CARTER-HOFFMANN
US Patent Nos.
7,102,103 B2
& 7,394,042 B2
Specifications subject
to change through
product improvement &
innovation.
BR1000
Front View
BR1000
Top View
*Capacity depends on stacking height of plates and covers (see “Clearance Between Shelves”). Maximum diameter includes cover. Due to the wide
variety of plate thicknesses and depths, as well as plate cover heights, actual capacity may vary.
BR1000
ENDURAHEAT
TM
BANQUET CARTER
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED
TURNED-IN SEAM
CONSTRUCTION... Adds
rigidity to entire cabinet and
eliminates raw edges for
ease of cleaning and
safety.
WELDED, DOUBLE
NICKEL-PLATED
REMOVABLE WIRE
SHELVES WITH
REINFORCED SHELF
CLIPS... Wires run from
front to back for easier
plate loading and
unloading.
BALLOON TREAD
CASTERS WITH SEALED
ROLLER BEARING... Long
lasting and easy rolling for
maximum load and
minimum maintenance.
Mounted to base in offset
wheel-ahead pattern for
easy rolling.
HIGH PERFORMANCE HEATER... Blower
system for fast heat up, recovery and even heat
distribution throughput cabinet. One hour
EnduraHeat charge/preheat time. 20 minute
preheat in convection mode. Toggle switch to
select convected heat or EnduraHeat with
indicator lights and EnduraHeat ready light.
Simple dial controls for setting temperature.
Removable without tools for easy cleaning.
HEAVY-DUTY 1” STAINLESS
STEEL TUBULAR HINGE... Full
length eliminates torque on top
hinge. Mounted with 1” bushing
and 12 gauge stainless steel
mounting bracket. Keeps doors
properly aligned and withstands
rugged use.
NON-MARKING BUMPER
SET IN HEAVY-DUTY
3/16” THICK EXTRUDED
ALUMINUM FRAME...
Protects doorways, walls
and cart from damage.
Reinforced with 12 gauge
angle bracket for added
strength.
ERGONOMIC DOOR HANDLES
WITH ROLLER LATCH...
Stainless steel tubular handle for
comfortable grip. Mounted with
backup plates for added
durability. Roller latch design has
been a proven performer for over
10 years.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bolsters with
perimeter frame for rugged
use and added durability.
DOUBLE WALL
STAINLESS STEEL
CABINET... Strongest, most
durable materials for long
life. High density 2” thick
fiberglass in walls, top, floor
and doors for maximum
heat retention.
BR1000
PUSH HANDLES... 1” Tubular
stainless steel mounted to
cabinet with backup plates.
Designed for comfort grip and
easy steering.
Loading...