SPECIFICATIONS
Printed in U.S.A. B55 0412
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
BB96X, BB120X & BB150X
BANQUET CARTERS
for plates up 12” diameter
CONSTRUCTION...Completely welded
double wall cabinet construction with
outer cabinet formed and welded to base.
All seams turned in to eliminate raw
edges.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior
and 24 gauge interior.
BASE FRAME...12 gauge stainless steel
full depth bolsters with 1”x1” stainless
steel perimeter channel supports.
CASTERS...6” diameter, industrial grade
polyurethane casters. Two swivel and two
rigid. Sealed roller axle bearing and
double ball bearing swivel. Zerk grease
fittings. Plate mounted and bolted to
base in offset “wheel ahead” pattern.
Two casters fitted with brakes.
BUMPER...Non-marking gray vinyl
bumper set in heavy duty 3/16” extruded
aluminum frame with reinforced corner
“cut-outs.”
INSULATION...1” thick high density
continuous wrap-around type fiberglass
insulation with 1 1/2” thickness on top.
GASKET...High temperature silicone
gasket mounted to cabinet.
DOOR...Welded double stainless steel
door. Filled with 1” thick fiberglass
insulation.
HINGES...Concealed, stainless steel
hinge with 5/16” pin.
PUSH HANDLES... Two horizontal full
width stainless steel tubular push handles
with back-up plates. Mounted to each
end of the cabinet.
LATCH...Flush mounted, hevy-duty
sliding latch with exclusive grip handle.
SHELVES...Welded, duplex nickel-plated
removable wire shelves.
THERMOMETER...Dial type with remote
sensing bulb and sensing bulb protector.
Mounted to door.
HEATING SYSTEM...Bottom mounted
heater. Stainless steel construction.
Removable without tools. 1600 watt
inconel-sheathed heating element. High
impedance protected, internally cooled
fan motor. Full range thermostat and
power indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1650 watts, 13.7 amps. Ten foot
rubber cord with 3 pring grounding plug.
NEMA 5-15P plug.
PERFORMANCE...Capable of heating to
200OF (94OC). Preheat to 160OF (71OC)
in approximately 20 minutes.
ACCESSORIES/OPTIONS...
4 wheel brakes
Alternate electrical configurations
On/Off heater toggle switch
Top mounted transport latch
Locking paddle latch
Lexan thermometer cover
Canned fuel holder
Humidity pan
Cold plate
Alternate caster sizes & types
Menu card holder
Plate carriers - specify open “P” type
or covered plate “C” type
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Plate Capacity* Number Clearance Shelf Overall Dimensions Caster Shipping
Number
with “P” with “C” without of Between Shelves Size Height Depth Width Diameter Weight
carriers carriers carriers Shelves in mm in mm in mm in mm in mm in mm lbs kgs
BB96X 96 120 120 3 13 330
48 x 25 1219x635 54
7
/
8
1394 33
1
/
2
851 56
1
/
2
1435 6 152 480 218
BB120X 120 144 144 3 16 406
48 x 25 1219x635 64
3
/
8
1635 33
1
/
2
851 56
1
/
2
1435 6 152 505 229
BB150X 150 180 180 3 16 406
59
5
/
8
x25 1514x635 64
3
/
8
1635 33
1
/
2
851 68
1
/
2
1740 6 152 515 233
BB96X
FOOD SERVICE EQUIPMENT
BANQUET CARTS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation.
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
BB96X
Front View
BB96X & BB120X
Top View
BB120X
Front
View
BB150X
Front
View
NSF/ANSI 4
*Capacity based on common plate depth and combined plate/cover height of 2.5”. Due to the variety of plate thicknesses and depths, as well as plate
cover heights, actual capacity may vary. Maximum diameter includes cover.
BB150X
Top View
BB96X, BB120X & BB150X
BANQUET CARTERS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED
TURNED-IN SEAM
CONSTRUCTION... Adds
rigidity to entire cabinet and
eliminates raw edges for
ease of cleaning and
safety.
REMOVABLE WIRE
SHELVES...Welded,
duplex nickel-plated with
reinforced shelf clips.
Sturdy for heavy plate
loads and removable for
cleaning.
WRAP-AROUND
BUMPER...Full perimeter
aluminum bumper with nonmarking gray vinyl insert.
Protects cart and facility
walls from damage.
6” DIAMETER INDUSTRIAL GRADE CASTERS WITH POLYURETHANE TREAD... Long lasting and easy
rolling for maximum load and minimum maintenance. Two swivel and two rigid. Swivel casters fitted with
brakes. Mounted to base in offset wheel-ahead pattern for easy rolling over uneven surfaces.
HIGH PERFORMANCE REMOVABLE HEATER...
Blower system for fast heat up, recovery and even
heat distribution throughout cabinet. Removable
without tools for easy service and cabinet cleaning.
Dual purpose handle for easy lift out also serves as
cord wrap.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bolsters with
perimeter frame for rugged
use and added durability.
DOUBLE WALL
STAINLESS STEEL
CABINET... Strongest, most
durable materials for long
life. High density 1” thick
fiberglass in walls and door,
1 1/2” thick on top for
maximum heat retention.
BB96X
NSF/ANSI 4
CONCEALED STAINLESS
STEEL HINGE WITH 5/16”
PIN...Keeps door properly
aligned and withstands
rugged use.
Loading...