SPECIFICATIONS
Printed in U.S.A. B57 0412
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC
BB96E, BB120E & BB150E
VALUE BANQUET CARTERS
for plates 8-3/4” to 10-1/2” in diameter
CONSTRUCTION...Completely welded
double wall cabinet construction with
outer cabinet formed and welded to base.
All seams turned in to eliminate raw
edges.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior
and 24 gauge interior.
BASE FRAME...12 gauge stainless steel
full depth bolsters with 1”x1” stainless
steel perimeter channel supports.
CASTERS...5” diameter, industrial grade
polyurethane casters. Two swivel and two
rigid. Sealed roller axle bearing and
double ball bearing swivel. Zerk grease
fittings. Plate mounted and bolted to
base in offset “wheel ahead” pattern.
Two casters fitted with brakes.
CORNER BUMPERS...Four snug fit nonmarking gray vinyl corner bumpers are
mounted at the base of the cabinet.
INSULATION...1” thick high density
continuous wrap-around type fiberglass
insulation with 1 1/2” thickness on top.
GASKET...High temperature silicone
gasket mounted to cabinet.
DOORS...Welded double stainless steel
door. Filled with 1” thick fiberglass
insulation.
HINGES...Concealed, stainless steel
hinge with 5/16” pin.
PUSH HANDLES... Two horizontal full
width heavy-duty aluminum push handles
with back-up plates. Mounted to each
end of the cabinet.
LATCH...Flush mounted, hevy-duty
sliding latch with exclusive grip handle.
SHELVES...Welded, duplex nickel-plated
removable wire shelves.
THERMOMETER...Dial type with remote
sensing bulb and sensing bulb protector.
Mounted to door.
HEATING SYSTEM...Bottom mounted
heater. Stainless steel construction.
Removable without tools. 1600 watt
inconel-sheathed heating element. High
impedance protected, internally cooled
fan motor. Full range thermostat and
power indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1650 watts, 13.7 amps. Ten foot
rubber cord with 3 pring grounding plug.
NEMA 5-15P plug.
PERFORMANCE...Capable of heating to
200OF (94OC). Preheat to 160OF (71OC)
in approximately 20 minutes.
ACCESSORIES/OPTIONS...
4 wheel brakes
Alternate electrical configurations
On/Off heater toggle switch
Top mounted transport latch
Locking paddle latch
Lexan thermometer cover
Cold plate
Alternate caster sizes & types
Menu card holder
Plate carriers - specify open plate “P”
type or covered plate “C” type
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Plate Capacity* Number Clearance Shelf Overall Dimensions Caster Shipping
Number with “P” with “C” without of Between Shelves Size Height Depth Width Diameter Weight
carriers carriers carriers
Shelves in mm in mm in mm in mm in mm in mm lbs kgs
BB96E 96 120 120 3 13 330 42
1
/
2
x221080x559 53
7
/
8
1368 28
1
/
2
724 48
1
/
8
1222 5 127 358 162
BB120E 120 144 144 3 16 406 42
1
/
2
x221080x559 63
3
/
8
1610 28
1
/
2
724 48
1
/
8
1222 5 127 390 177
BB150E 150 180 180 3 16 406 53
1
/
4
x221353x559 63
3
/
8
1610 28
1
/
2
724 58
7
/
8
1495 5 127 442 200
BB150E
FOOD SERVICE EQUIPMENT
BANQUET CARTS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation.
*Capacity based on common plate depth and combined plate/cover height of 2.5”. Due to the variety of plate thicknesses and depths, as well as plate cover heights, actual
capacity may vary.
Carter-Hoffmann
CAD Drawing Scale: 1/4” = 1’
BB96E
Front View
BB96E & BB120E
Top View
NSF/ANSI 4
BB120E
Front View
BB150E
Front View
BB150E
Top View
BB96E, BB120E & BB150E
VALUE BANQUET CARTERS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED
TURNED-IN SEAM
CONSTRUCTION... Adds
rigidity to entire cabinet and
eliminates raw edges for
ease of cleaning and
safety.
REMOVABLE WIRE
SHELVES...Welded, duplex
nickel-plated with reinforced
shelf clips. Sturdy for
heavy plate loads and
removable for cleaning.
5” DIAMETER INDUSTRIAL GRADE CASTERS WITH
POLYURETHANE TREAD... Long lasting and easy rolling for
maximum load and minimum maintenance. Two swivel and two
rigid. Swivel casters fitted with brakes. Mounted to base in
offset wheel-ahead pattern for easy rolling over uneven
surfaces.
HIGH PERFORMANCE
REMOVABLE HEATER...
Blower system for fast heat
up, recovery and even heat
distribution throughout
cabinet. Removable
without tools for easy
service and cabinet
cleaning.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bolsters with
perimeter frame for rugged
use and added durability.
DOUBLE WALL
STAINLESS STEEL
CABINET... Strongest, most
durable materials for long
life. High density 1” thick
fiberglass in walls and door,
1 1/2” thick on top for
maximum heat retention.
BB120E
(shown with optional
“P” plate carriers)
NSF/ANSI 4
SNUG FIT CORNER BUMPERS... Protect corners of cart from
damage and reduces cabinet depth vs carts with standard
wrap-around bumper. Cart fits through narrower doorways.
Loading...