Page 1
SPECIFICATIONS
Printed in U.S.A. B10 0412
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
BB700, BB1100, BB1300, BB1600 & BB1300XX
EQUAHEAT BANQUET CARTERS
For Preplated Banquet Meals
Canned or Electric Heat
CONSTRUCTION...Completely welded
double wall cabinet construction with outer
cabinet formed and welded to base. All
seams turned in to eliminate raw edges.
CABINET MATERIAL...All stainless steel
construction; 20 gauge polished exterior and
24 gauge interior.
BASE FRAME...12 gauge stainless steel full
depth bolsters with 1”x1” 16 gauge tubular
stainless steel perimeter supports welded to
bolsters.
CASTERS...6” diameter, industrial grade
casters with polyurethane tread. Sealed
roller axle bearing and double ball bearing
swivel. Zerk grease fittings. Plate mounted
and bolted to base in offset “wheel ahead”
pattern. Two casters fitted with brakes.
BUMPER...Non-marking gray vinyl bumper
set in heavy duty 3/16” extruded aluminum
frame with reinforced corner “cut-outs.”
INSULATION...1” thick high density
continuous wrap-around type fiberglass
insulation with 1 1/2” thickness on top.
DOOR...Welded double stainless steel door.
20 gauge polished exterior and 20 gauge
interior. Filled with 1” thick high-density
fiberglass insulation.
HINGES...Concealed, stainless steel hinge
with 5/16” pin.
GASKET...High temperature silicone gasket
mounted to cabinet.
LATCHES...Flush mounted, heavy-duty
sliding latch with exclusive grip handle.
PUSH HANDLES... Two horizontal full width
1” diameter stainless steel tubular push
handles with back-up plates. Mounted to
each end of the cabinet.
SHELVES...Welded, duplex nickel-plated
removable wire shelves.
THERMOMETER...Dial type with remote
sensing bulb and sensing bulb protector.
CANNED FUEL DRAWERS... Drawers can
be accessed without opening cabinet. Each
is fitted with a safety latch to keep drawer
securely closed during transport. Deflector
shields above drawers direct heat into baffle
on back wall of cabinet to distribute heat
throughout cabinet.
HEATING SYSTEM...Bottom mounted
heater. Stainless steel construction.
Removable without tools. 1600 watt inconelsheathed heating element. High impedance
protected, internally cooled fan motor. Full
range thermostat and power indicating light.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1500 watts, 13 amps. Ten foot
rubber cord with 3 pring grounding plug.
NEMA 5-15P plug.
PERFORMANCE...Capable of heating to
200oF (94oC). Preheat to 160oF (71oC) in
approximately 20 minutes.
ACCESSORIES/OPTIONS...
4 wheel brakes
Alternate electrical configurations
Menu card holder
Top mounted transport latch
Locking paddle latch
Lexan thermometer cover
Alternate caster sizes & types
Cord wrap
Locking door latch with key
Heavy-duty “Las Vegas” package
Reinforced cord strain relief
Tow hitch (except BB700)
Marine package
Donut-style door bumpers
Close-fit bumper
Corner bumpers in lieu of wrap-
around bumper
Pull-up handle(s)
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Plate Capacity* Number Clearance Shelf Size Overall Dimensions Caster Shipping
Number
8.75-11” 11.25-12-75” of Between Shelves Height Depth Width Diameter Weight
diameter diameter Shelves in mm in mm in mm in mm in mm in mm lbs kgs
BB700 60 - 3 16
1
/
2
419 24
3
/8
x21
7
/16
619 x 544 74
3
/
4
1899 32 813 33 838 6 152 378 171
BB1100 96 - 3 13 337 47x22
1
/
8
1194x546 65 1651 32 813 55
5
/
8
1413 6 152 498 226
BB1300 120 - 3 16
1
/
2
419 47x22
1
/
8
1194x546 74
3
/
4
1899 32 813 55
5
/
8
1413 6 152 507 230
BB1600 150 - 3 16
1
/
2
419 58x22
1
/
8
1486x546 74
3
/
4
1899 32 813 67
1
/
8
1705 6 152 658 298
BB1300XX - 120 3 16
1
/
2
419 63x25
5
/
8
1619x651 74
3
/
4
1899 38 965 74 1880 6 152 678 307
FOOD SERVICE EQUIPMENT
BANQUET CARTS
CARTER-HOFFMANN
BB700
Top View
BB1100 & BB1300
Top View
BB1300XX
Top View
BB1600
Top View
Carter-Hoffmann CAD
Drawing Scale: 1/4”=1’
See reverse side
for photo
BB700
Front
View
BB1300
Front
View
BB1600
Front
View
BB1300XX
Front
View
BB1100 Front View
NSF/ANSI 4
* Capacity based on common plate depth and combined plate/cover height of 2.5”. Due to the variety of plate thicknesses and depths, as well as plate cover heights,
actual capacity may vary.
Page 2
BB700, BB1100, BB1300, BB1600 & BB1300XX
EQUAHEAT BANQUET CARTERS
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
Since 1947, Foodservice Equipment That Delivers!
COMPLETELY WELDED
TURNED-IN SEAM
CONSTRUCTION... Adds
rigidity to entire cabinet and
eliminates raw edges for
ease of cleaning and safety.
REMOVABLE WIRE
SHELVES...Welded, duplex
nickel-plated with reinforced
shelf clips. Sturdy for heavy
plate loads and removable for
cleaning.
CANNED FUEL DRAWERS...Allow access to canned
fuel without opening cabinet door. Safety latches keep
drawers securely closed during transport. Canned fuel
is set back from the drawer handle to reduce burn
hazard. Deflector sheilds above drawers force heat to
precision-engineered baffle to evenly distribute heat
throughout cabinet.
WRAP-AROUND
BUMPER...Full perimeter
aluminum bumper with nonmarking gray vinyl insert.
Protects cart and facility walls
from damage.
6” DIAMETER INDUSTRIAL GRADE CASTERS
WITH POLYURETHANE TREAD... Long lasting and
easy rolling for maximum load and minimum
maintenance. Two swivel and two rigid. Swivel casters
fitted with brakes. Mounted to base in offset wheelahead pattern for easy rolling over uneven surfaces.
WHEEL-AHEAD CASTER
CONFIGURATION...
Mounted to base in offset
wheel-ahead pattern for easy
rolling over uneven surfaces.
Allow for easy handling and
steering.
CONCEALED STAINLESS
STEEL HINGE WITH 5/16”
PIN... Keeps door properly
aligned and withstands
rugged use.
NON-MARKING BUMPER
SET IN HEAVY-DUTY
3/16” EXTRUDED
ALUMINUM FRAME...
Floating style, bolted to the
base. Protects doorways,
walls and cart from
damage.
FLUSH MOUNTED
SLIDING DOOR LATCH...
Exclusively designed for
transport applications.
Door remains closed
during transport. Flush
design protects cart from
damage.
HIGH PERFORMANCE
REMOVABLE HEATER...
Blower system for fast heat
up, recovery and even heat
distribution throughout
cabinet. Removable without
tools for easy service and
cabinet cleaning.
HEAVY-DUTY STAINLESS
STEEL BASE FRAME... 12
gauge caster bolsters with
perimeter frame for rugged
use and added durability.
DOUBLE WALL
STAINLESS STEEL
CABINET... Strongest, most
durable materials for long
life. High density 1” thick
fiberglass in walls and door,
1 1/2” thick on top for
maximum heat retention.
BB1300
(shown with optional top-mount transport latch)
NSF/ANSI 4
Specifications subject to
change through product
improvement & innovation.
Loading...