Carson VERSALOUPE LH-40 Instructions For Use Manual

LH-40

VERSALOUPE

TM

10x LED Lighted
Focusing Loupe

Instructions for Use

PDF: www.carson.com/LH40guide

English / Français / Español / Deutsch /日本語

Customer Service:

If you experience any difficulties, please contact us and

we will be happy to help you.

In the U.S.A.

Phone: [phone]

Email: [e-mail]

In the U.K.

Phone: [phone]

Email: [e-mail]

In the E.U.

Phone: [phone]

Email: [e-mail]

For warranty information, visit www.carson.com/warranty

LH-40 / ©2018

Installing the Battery

Turn loupe over and locate the battery cover inside acrylic base. Unscrew
cover and remove as shown below. Install one CR2032 coin cell battery
with the correct polarity. Reattach battery door and secure with screw.

WARNING: INSPECT ALL BATTERIES FOR SIGNS OF CORROSION OR
LEAKAGE. DO NOT EXPOSE TO FIRE OR EXCESSIVE HEAT. USE ALKALINE
BATTERIES ONLY, RECHARGEABLE BATTERIES NOT RECOMMENDED.
INSERT ALL BATTERIES IN THE DIRECTION INDICATED.

REMOVING
BATTERY
DOOR

REPLACING
BATTERY
DOOR

Activating LED Light

Slide switch to turn on/off LED.

Focusing Loupe

Place loupe over viewing subject
and turn focusing ring until image
is sharp.

Cleaning Your Magnifier

Clean lens with a soft, clean microfiber cloth by rubbing gently in a
circular motion. Moisten the lens cloth with water if necessary. Do not
use harsh chemicals, solvents or abrasives as they may damage the lens.

FIRE HAZARD: KEEP MAGNIFIER AWAY FROM DIRECT SUNLIGHT TO
PREVENT ACCIDENTAL FIRE.

CAUTION: VIEWING THE SUN CAN CAUSE PERMANENT EYE DAMAGE.
DO NOT VIEW THE SUN WITH THIS ITEM. DO NOT PLACE THE LED LIGHTS
DIRECTLY ON YOUR EYE AS THIS MAY CAUSE DAMAGE AS WELL.