Carson HA-150-10 User Manual

Carson Manufacturing Co., Inc.

5451 North Rural Street

Indianapolis, IN 46220

Phone: [phone] Fax: [phone]

www.carson-mfg.com

HA-150-10

WATERPROOF

HORN AMPLIFIER

INSTALLATION AND OPERATING

INSTRUCTIONS

Please consult your state/local vehicle codes to ensure compliance with vehicle horn regulations.

Carson is a trademark of Carson Manufacturing Company, Inc.

Sound Hazard - Sound level from horn speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate unit without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)

This product is legal in most states.

Page 2 of 4 HA-150-10 14 Installation and Operating Instructions

The HA-150 Horn Amplifier is a premium waterproof unit designed for an 11 ohm 100 watt
speaker. The unit produces a simulated air-horn sound. This compact unit utilizes short circuit
and reverse polarity protection systems for maximum service life. A power indicator light is pro­vided for diagnostics. The unit is intended to be mounted under hood of vehicle with the speaker.

SPECIFICATIONS

GENERAL DESCRIPTION

Speaker Load Single 100W 11ohm
Input Voltage 9 - 16 VDC

Input Current 8 AMPS (14 VDC)

Output Power 105 WATTS RMS MAX. (15 VDC)

Short Circuit Current 50 AMPS (supply circuit must be capable of supplying this for 1 second)

Operating Temp. -22° F to +200°F

Size 4-1/8" Long, 2-1/8" Wide, 1-1/2" High

Weight 1 LB.

Due to continuous product improvements, we must reserve the right to change any specifications and information,
contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.

NOTICE

See www.carson-mfg.com for latest information.

INSTALLATION

Proper installation of the unit is essential for years of safe, reliable operation. Please read all
instruction before installing the unit. Failure to follow these instructions can cause serious dam­age to the unit or vehicle and may void warranties.

SAFETY PRECAUTIONS

For the safety of the installer, vehicle operator, passengers and the community please observe
the following safety precautions. Failure to follow all safety precautions and instructions may

result in property damage, injury or death.
Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical

systems and emergency equipment.

Sound Hazard - Sound level from horn speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate unit without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)

Mounting - Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag
deployment area. Assure clearances before drilling in vehicle.
Wiring - Use wiring capable of handling the current required. Make sure all connections are tight.
Route wiring to prevent wear, overheating and interference with air bag deployment. Install and
check all wiring before connection to vehicle battery.

Testing - Test for proper unit operation. Test vehicle operation to assure no damage to vehicle.
Keep These Instructions - Keep these instructions in the vehicle or other safe place for future

reference. Advise the vehicle operator of the location.

UNPACKING

Inspect contents for shipping damage. If found alert carrier immediately
Contact supplier immediately if any components are missing.
Contents of box should include the following items:

Qty Item

1 Amplifier Unit (HA-150-10 14)

1 Instruction Manual (CP5050 This Manual)

01/27/10 CP5050A

.