Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
•Specification
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
Car compatibility: Volvo XC90, S90 2017
Components : Interface* 1ea, Subboard*1ea
Multimedia interface Input/output spec
Input : Analog RGB*1(Navigation), HDMI*1, A/V*2,
CVBS(Rear camera)*1,
Output : To LCD*1
Power spec
Input power : 8VDC ~ 18VDC
consumption : 5WATT
Switch input mode
External video sources skip function : able to control input
videos on and off via DIP switches.
Able to switch videos via the remote, button switch, and
original buttons.
Able to detect the rear view camera (back up camera) via
Lamp or CAN.
•Features
Control external videos sources (DVD, DTV) via Multi Media
Touch
Adjust external videos screen position
The improved Screen Display (User Friendly Interface)
Switch modes via OEM button
Supply power for rear view camera (Back up camera)
Assist your parking via Dynamic PAS(Parking Assistance
System), moving parking line according movement of
steering wheel
2
•Product Exterior
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
•Components
Power * 1ea
LCD * 2ea
(HLCDCA0017)
RGB * 1ea
(HRGBCA0026)
MULTI * 1ea
(HARETC0240)
AV * 1ea
(HAVCAB0056)
LCD Extension * 1ea
(QCPASS0638)
REAR * 1ea
(HARETC0002)
BUTTON * 1ea
(HARETC0001)
IR * 1ea
(HIRCAB0002)
Remote * 1ea
(REMOTE0001)
3
•DIP SWITCH
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
PIN 기능 Dip S/W 선택
※ ON : DOWN / OFF : UP
1 RGB MODE
2 HDMI MODE
3 AV1 MODE
4 AV2 MODE
5 FRONT CAMERA
6 NO USE-OFF
7 REAR CAMERA MODE
8 NO USE-OFF
※Make sure to disconnect and reconnect the power cable in order to apply the
dip switch setting whenever changing DIP switch. Otherwise, DIP switch setting will
not be applied.
OFF : DISPLAY RGB
ON : SKIP RGB
OFF : DISPLAY HDMI
ON : SKIP HDMI
OFF : DISPLAY AV1
ON : SKIP AV1
OFF : DISPLAY AV2
ON : SKIP AV2
OFF : DISPLAY FRONT CAMERA
ON : SKIP FRONT CAMERA
OFF : OEM REAR CAMERA
ON : EXTERNAL REAR CAMERA
•REMOTE CONTROL SETTING
Key FUNCTION
POWER & PIP NO USE
MENU Activate Factory menu
OK Selection, changing image display
▲ Up
▼ Down
◀
▶
Left( Access the factory mode
if the button is pressed for 2 seconds)
Right (Activate factory reset
if the button is pressed for 2 seconds)
4
•Factory setting
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
Menu of FACTORY
IMAGE
PARK
UTIL1
UTIL2
INFO
H-POSITION
V-POSITION
H-SIZE(NAVI)
Adjust a current screen position and size
H-POSITION : Move display horizontally
V-POSITION : Move display vertically
H-SIZE(NAVI) : Adjust the size of navigation
display horizontally
MENU to Return SEL to Select/Save
Menu of FACTORY
IMAGE
PARK
UTIL1
UTIL2
INFO
MENU to Return SEL to Select/Save
PAS TYPE
PAS SETUP
REAR TYPE
SAFE ENABLE
Adjust rear view camera setting.
PAS TYPE : Select type of parking guide line
- NOT USED : No use parking guide line
- PAS ON : Selecting Dynamic parking guide line
- PAS OFF : Selecting fixed parking guide line
PAS SETUP : Adjusting the position of the parking guide line
<H-POSITION> <V-POSITION>
REAR TYPE : Choose rear camera recognition.
- CAN : By connecting to “CAN” cable of the car gear, changing to
rear camera mode when shifting into reverse. (Connect “CAN”
cable of the power cable to the “CAN” cable of the car gear.)
- LAMP : By connecting to the rear lamp of the car, switch to rear
camera mode when shifting into rear. (Connect “Rear-C” cable of
the power cable to the rear lamp of the car.)
SAFE ENABLE : If it is enable, HDMI, RGB, and A/V mode doesn’t show up
while driving. (Default : OFF)
5
•Factory setting
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
Menu of FACTORY
IMAGE
PARK
UTIL1
UTIL2
INFO
MENU to Return SEL to Select/Save
Menu of FACTORY
IMAGE
PARK
UTIL1
UTIL2
INFO
MENU to Return SEL to Select/Save
NAVI MODEL
AVOUT SELECT
F-CAM FUNC
FACTORY RESET
IR REMOTE SELECT
IR OSD CONTROL
IR MEMORY
Navigation & Car model setting up
NAVI MODEL : Choose RGB Navigation
(Default, Q-ROI)
AVOUT SELECT : Selecting background sound
through car AUX.
(DEFAULT, HDMI1, HDMI2, AV1)
F-CAM FUNC : Time setting for the front camera
(OFF. 3sec, 5sec, 10sec, 15sec)
FACTORY RESET : Reset FACTORY setting
Other options setting up
IR REMOTE SELECT : Able to use remote control
on DVD, DTV by selecting “User”
after IR memory registered.
(Default, User)
IR OSD CONTROL : Selection to use ODS control
IR MEMORY : Enter Remote value of DTV, DVD
Menu of FACTORY
IMAGE
PARK
UTIL1
UTIL2
INFO
MENU to Return SEL to Select/Save
SYSTEM VERSION
(MAIN-130723)
Able to check the version of product
6
•OEM button
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
※ Press Home button to switch the mode
* Long press : mode switch(RGB→HDMI1→A/V1→A/V2→F-CAM→OEM)
* Short press : Back to OEM
7
•Installation diagram
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
ACC
GND
CAN1-H
CAN1-L
CAM2-H
CAN2-L
BUTTON1
BUTTON2
RGB
NAVI BOX
HDMI
Device
V
A
A
V
U
U
I
F
R
C
C
A
A
M
M
R
R
C
A
M
T
E
O
M
G
O
G
T
L
E
E
V
S
R
1
A
E
F
A
I
E
R
R
F
12
V
C
V
2
A
M
S
I
E
R
12
L
V
D
D
D
I
I
E
O
O
O
(R)
(L)
IN
IN
IN
1
1
1
A
A
V
U
U
I
D
D
D
I
E
O
O
O
(R)
(L)
IN
IN
IN
2
2
2
V
I
D
D
E
E
I
O
O
O
O
U
U
T
T
1
2
A
A
I
U
U
D
D
I
I
O
O
(R)
(L)
O
O
U
U
T
T
A/V CABLE
MULTI CABLE
8
•CAN connection(GEAR, PAS)
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
※ Find OBD cable under the driver’s seat
CAN Low : this cable is connected to
CAN1-L(#4 pin) of the supplied power cable
CAN High : this cable is connected to
CAN1-H(#3pin) of the supplied power cable
※ The color of wires may vary
•ADC connection to use OEM button
※ Find the cable behind the monitor
ADC(#11pin) : this cable is connected to
BUTTON1(#7pin) of the supplied power cable
6
12
11
9
•LCD cable connection
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
Find OEM blue cable
on the back side of
the monitor
OEM cable
1
Remove the OEM
blue cable
2
Connect the
supplied LCD cable
to the same place.
Monitor
1. Connect Blue OEM cable to LCD extension connector and the supplied
LCD cable is connected between LCD extension connector and LVDS-IN
of the interface
2. Also, the supplied LCD cable is connected between the monitor and
LVDS-out of the interface
10
•Q-ROI RGB&Uart Touch
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
※Connect IR-NAVI wire from RGB-In cable of QHI-XC90
to Uart wire from RGB-Out of Q-ROI RGB
The first pin from the right of RGB Out is
Uart wire
IR-NAVI label for QHI-XC90
11
•Q-ROI2& Uart Touch
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
※Connect IR-NAVI wire from RGB-In cable of QHI-XC90
to Red wire of Uart-touch cable from QROI2 multi cable
There are three wires for Uart-touch cable
from QROI2 multi cable.
IR-NAVI label for QHI-XC90
12
•Trouble shooting
Car-Solutions.com
support@car-solutions.com
www.car-solutions.com
Q. I cannot change mode
A. Check connection of Ground cable and IR Cable. Check LED lamp
is on, if not check connection of POWER cable.
Q. All I got on the screen is black.
A. Check second LED lamp of the interface is on, if not, check A/V
sources connected are working well.
(Second lamp indicates AV sources connected works well.)
Check interface connection has been done well.
Q. Displayed image color is not proper (too dark or unsuitable color)
A. Press ▶ button on the remote control for 2 seconds and check how
it goes, if it does not work, inform to manufacturer.
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
Q. Set mode not appear
A. Check DIP Switch.
Q. OEM image is not displayed.
A. Check interface’s LCD In/Out cable connection. If the status keeps
on, inform to manufacturer.
Q. Screen only displays white color.
A. Check LCD out cable is connected well, if this status keeps, inform to
manufacturer.
Q. If no image is shown on screen after connecting CAN wire with Park
gear.
A. Go on the “FACTORY MODE”, check “UTIL-Rear Select”. If “LAMP”,
change the setting as “CAN” with the remote control. (※ when
connecting Rear-C wire of LAMP power cable to Backup lights,
Setting should be like this / CAN : if controlling rear camera with
CAN wire)
13
Loading...