Adapter
KTA Series
User Manual
1. Introduction ........................................................................................................................................................... 3
2. Sketch....................................................................................................................................................................3
2.1 Ports figure............................................................................................................................................... 3
2.2 LED Indicators........................................................................................................................................ 4
2.3 Application figure................................................................................................................................... 4
3. Installation and Setting.......................................................................................................................................... 4
3.1 Installation................................................................................................................................................4
3.2 Configuration........................................................................................................................................... 5
3.2.1 Configuring Network Parameters from Telephone Handset.............................................. 5
3.2.2 Configuring Network Parameters from Web Browser......................................................... 5
4. Functions ............................................................................................................................................................... 9
4.1 Making and Receiving calls ................................................................................................................. 9
4.1.1 Making outgoing calls......................................................................................................................9
4.1.2 Receiving........................................................................................................................................ 10
4.2 Use digitmap.......................................................................................................................................... 10
4.3 Call Forwarding.................................................................................................................................... 10
5. T ec hnical Parameter............................................................................................................................................. 11
5.1 The electronic specifications.............................................................................................................. 11
5.2 Working/storing environment............................................................................................................. 11
5.3 Dimensions............................................................................................................................................. 12
6. Frequent Problems and Solutions........................................................................................................................ 12
7. Appendix.............................................................................................................................................................. 12
7.1 Features................................................................................................................................................... 12
7.2 Standards and agreements...................................................................................................................13
7.3 Recommend usage net condition....................................................................................................... 13
7.4 Commands For Setting Network Parameters.................................................................................. 13
2
1. Introduction
KTA series is one of VoIP terminal products, with one port connecting with regular PSTN terminal devices and
one port connecting with Internet. It transfers voice through net. By the management of soft-switch platform and
the support of telecom, KTA can communicate with VoIP terminals and dial to regular phone inexpensively.
KTA series’ port
z KTA1000’s port
One LAN port (10 Base-T)
One PC port (10 Base-T)
One PHONE port (FXS)
The relation between LAN port and PC port is not router but hub
z KTA1001’s port
One LAN port (10 Base-T)
One PHONE port (FXS)
z KTA1010’s port
One LAN port (10 Base-T)
One PC port (10 Base-T)
One PHONE port (FXS)
One LINE port (FXO)
KTA1010 has HUB function
The relation between LAN port and PC port is not router but hub
z KTA1011’s port
One LAN port (10 Base-T)
One PHONE port (FXS)
One LINE port (FXO)
2. Sketch
2.1 Ports figure
1——Power Port
2——Setup Button
3——PC port :(10 Base-T Ethernet)
4——LAN port:(10 Base-T Ethernet)
5——PHONE Port (FXS)
6——LINE Port (FXO) (only for KTA1010,KTA1011)
3
RJ45 port to connect with PC (only for KTA1000, KTA1010)
RJ45 port to connect with Internet or Local Network
2.2 LED Indicators
RX TX MSG Phone ServicePower
Power——
TX——
RX——
Service——
Power On LED
Network data being transmitted
Network data being received
Service connected (Remains illuminated when successfully logged-on to server)
Phone——phone in operation (phone in-used when light on means working under VoIP, when light off means
working under PSTN)
MSG——unanswered call LED (unanswered call appeared if light on)
2.3 Application figure
Internet
ISP
Telecom
LANPC
PHONE
LINE
Small PABX
123
456
789
8#
*
123
456
789
8#
*
Instruction:KTA 1000,KTA1001 without LINE port,KTA1001,KTA1011 without PC port
123
456
789
8#
*
3. Installation and Setting
3.1 Installation
(1) Locate your KTA close to your Internet connection and a power outlet.
(2) Plug the RJ-45 connector of the Ethernet 10/100Base-T cable into the KTA’s side input port ④, and plug the
other side into a hub or switch, or wall/ground socket of the structuring cable.
4
(3) Plug one side of the RJ-11 of phone line to the PHONE Port(FXS) ⑤of KTA, plug another side of the phone
line into user terminal (phone, line entrance to PABX, etc.).
(4) If you are the KTA1010,KTA1011’s user, put the phone line to the LINE Port(FXO) ⑥of KTA, you will have
the both function of VoIP and PSTN.
(5) Plug the accessory power-adapter into the power outlet, then connect the output-plug to power-port ① of the
KTA.
(6) Then waiting for KTA’s startup, after hearing short phone ring, KTA is now working.
Notice: Please select different type of Ethernet Cable according to the network devices (devices connec ting
to LAN). Select Straight-through Ethernet Cable for network equipments (router, hub, etc.); Select
Cross-over Ethernet Cable for the PC of ISP server; Select the corresponding Ethernet Cable according to
the instructions of XDSL and Cable Modem (using Straight-through Ethernet Cable in most casts).
3.2 Configuration
3.2.1 Configuring Network Parameters from Telephone Handset
Without PC,users and network technician can set parameter through ordinary phone and KTA,all those operations
can be finished under VoIP model.
Instrucitons for network parameter setting:
Command Format:
Every configuration command from your telephone handset will be similar to the following format:
#*xxxxx#.Commands are a minimum of 3 digits. If a command is prefixed by ”#*” then the
command is a query. If the command is prefixed by just ”#” then it is a programming command.
Use ”##” to cancel a command.
If the command is successful you will hear “di du”. If the command is unsuccessful you will
hear ”du du du…”
Common commands:
Note: Each Command below is followed by its alphanumeric representation to make it easy to
remember.
Query IP Address: pick-up phone handset and key in #*047# or #*0IP#
Set IP address: pick-up handset and key in #73847# xxx*xxx*xxx*xxx# or #SETIP#xxx.xxx.xxx.xxx#
Enable DHCP: pick-up handset,then key in #3427# or #DHCP#
Disable DHCP: pick-up handset, then key in ##3427# or ##DHCP#
Reboot: pick-up handest,then key in #778# or #RST#
Restore default settings: pick-up handset ,then key in #358# or #DLT#
Using H.323:pick-up handset ,then key in #4323# or #H323#
Using SIP:pick-up handset ,then key in #747# or #SIP#
Using adjusting IP:pick-up handset,then key in #3228# or #FACT#.IP type is STATIC IP.IP
address:192.168.1.100,Gateway IP:192.168.1.1,Subnet mask:255.255.255.0.
Note: After performing each of the above commands the KTA will reboot. You should wait
until your telephone rings once to indicate that the reboot process has been completed.
Notice:DHCP is a default setting of KTA Series.
3.2.2 Configuring Network Parameters from Web Browser
Open your web browser and enter the IP Address that has been assigned to the KTA (if necessary
use the “Query IP Address” command in the above section). Log-in page will be displayed. The
default password is 1234.
Browser, such as Microsoft Internet Explorer of Windows operating system, to set up parameters.
5
Loading...