Carrier TSTATCCPSE01 User's Information Manual
TSTATCCPSE01 PROGRAMMABLE
Carrier
Heating & Cooling
Am
7:00
WAKE
FAN
ON
68
DIGITAL THERMOSTAT
USER INFORMATION MANUAL FOR THE OPERATION AND
MAINTENANCE OF YOUR NEW THERMOSTAT
PROGRAMMABLE DIGITAL
THERMOSTAT
Easy To Read Display
HEAT
72
Thermoglow Backlight
Remote Sensor Ready
Multi-Stage, One for All
Meets California Title 24 Residential
Heat Pump & Heat Cool
NOTE TO INSTALLER: THIS MANUAL MUST BE LEFT WITH THE EQUIPMENT USER.
Table Of Contents
FRONT PANEL
DISPLAY
QUICK START Set the clock and go
BASIC OPERATION
PROGRAMMING 2 Time Periods
ADVANCED SETUP
ABOUT ADVANCED OPERATION
WARRANTY
CAUTION
Follow Installation Instructions before proceeding.
2
3
4
5
7
9
12
16
SET THERMOSTAT TO MODE “OFF” PRIOR TO
CHANGING SETTINGS IN SETUP OR RESTORING
FACTORY DEFAULTS.
Residential Light Commerical Systems Carrier Corporation 10/01
Page 1
Front Panel
Am
7:00
WAKE
FAN
ON
68
HEAT
72
Backlit LCD Display
Warmer or + Button
Cooler or - Button
Mode/ Next Button
Heat or Cool Indicator
Red = Heat, Green = Cool
Easy
STAT
RESIDENTIAL
:
Pm
OUTSIDE
o
OUTSIDE
FAN
FAN
SET
PROGRAM
12:00
WAKE
74
o
OUTSIDE
SET
PROGRAM
PROGRAM
ON/OFF
CLOCK
FAN
SET
HEAT
72
PROGRAM
SET
ON/OFF
PROGRAM
PROGRAM
ON/OFF
MODE/
NEXT
This Big Letter label is also available
for easy identification of the thermostat
buttons.
SET
CLOCK
MODE/NEXT
SET
CLOCK
Page 2
Display
2
12:00
:
Am
Pm
COOL
HEAT
1
1
6
1
Mode Indicators
Selects the operation mode of the equipment.
WAKE/SLEEP - indicates the stored program
is running.
HEAT - indicates the heat mode.
COOL - indicates the air conditioning mode.
OFF - indicates the entire system is turned off.
2
Clock Display
Indicates the current time of day. Page 4.
SLEEP
WAKE
OFF
FAN
ON
88
3
88
OUT
SIDE
I88
1
4
5
3
Room Temperature Display
Indicates the current room temperature.
4
Desired Set Temperature
Indicates desired room temperature. Page 7.
5
Outside Indication
Indicates the temperature displayed is from
the optional outside sensor.
6
Fan Operation Indication
Fan On - indicates constant, continuous fan operation
When Fan On is not lit - indicates the fan will
only operate when necessary to heat or
to cool.
Page 3
Quick Start Set the Clock and Go
During Setup & Programming:
SET CLOCK
Pressing the Up and Down
buttons will modify the flashing
Press the SET CLOCK
button.
:
12:00
Am
selection.
.
(Represented in dark black)
Press the SET CLOCK button as above to
return to normal operation, after setting the clock.
To adjust the
clock use
buttons.
To adjust just the Hours;
hold the Fan button in
pressing the Up or
while
Down buttons.
SET CLOCK
This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
Page 4
Basic Operation
Select Desired Temperature
:
12:00
Am
HEAT
In any mode, adjust the
desired Set Temperature
with
69
70
Pressing the up/down buttons in Heat or Cool modes will adjust only the
heat or cool set temperature.
Fan
Operation
Press
FAN
buttons.
:
12:00
OFF
FAN
ON
65
Am
Fan On indicates constant fan operation.
This feature is active even if the thermostat
is set to Off.
Page 5
Loading...