AIR
PURIFIER
Quick Start Guide
RMAP-ST
RMAP-XL
RMAP-SST
RMAP-SXL
This guide is for quick reference only. Please see the User Manual for complete
Note
CAUTION
product information and operational instructions.
•
Be sure to unplug the unit before removing the filter packaging.
•
Remove the plastic packaging from the filter before use.
•
Keep plastic packaging away from children as it may cause suffocation.
How to Prepare/Change the Filter
Hold the top cover of the product with
1
both hands and pull up.
Remove the plastic packaging from the filter.
3 4
Failing to remove the packaging will
►
result in abnormal sounds and the filter
will not work properly; and it may cause
a fire or other damage to the product.
Plastic
packaging
2
Grasp the filter cover hole on the rear and
pull it forward. Remove the filter from the
unit by pulling it straight out.
Filter cover
hole
Slide the filter back into the unit.
Replace filter cover.
5
Insert the cover into the fixed groove at
►
the bottom of the product.
Slide the cover forward so that the cover
►
fits into the top grooves.
Fixed groove at bottom
Cover-positioning
groove at top
Hold the top cover of the product with both
Auto
LED
Auto
hands and slide it back in place,
sure the logo appears in the front.
Display
Smart Auto Mode
Sleep Mode
Filter Replacement Indicator
Wi-Fi
making
When the filter installation is complete,
76
plug the unit into a 120V outlet, press the
+ " " button on the control panel for five
seconds or more to initialize it.
The red filter light will turn off when the
►
product is reset.
Timer
Indoor Air Quality Light
Sleep
Control Panel
Sleep
LED
Control Panel Descriptions
Sleep
Sleep mode / Timer
LED ON/OFF & Wi-Fi® connection Smart automatic operation
Turn down the fan speed and time
(by 1 hour)
Turbo
Auto
Turn up the fan speed and time
(by 1 hour)
Power ON/OFF
Normal Operation
When the air purifier turns on, the sensor is initialized and the display
shows during initialization.
Note
Press the button to turn on.
1
The previously selected operation mode will
►
be displayed.
Press the button on the control panel to
2
select your desired fan speed.
You can adjust the fan speed from level 1 (F1) to
►
level 18 (F18).
Note: The default home display on Wi-Fi® models
will show a PM2.5 reading. Once the button
is pushed, the display will switch to show designated
fan speed.
How to Install Casters (Optional)
Inside of the air purifier package, there is a small box containing four casters and eight screws.
1
Remove the four bottom bases from the air purifier with a screw driver.
2
Replace each base with a caster, utilizing two screws per caster.
3
Retain the removed bottom bases and screws for future use.
4
If there is no caster box inside the product box, please contact customer
service at 1-888-320-0909.
Note
carrierathome.com 1-888-320-0909 01-811-20535-03
©2021 Carrier. All Rights Reserved.
Manufacturer reserves the right to discontinue, or change at any time, specifications
or designs without notice or without incurring obligations. Third-party trademarks and
Third-party trademarks and logos are the property of their respective owners.
Loading...