Carreras Consulting FLIP3G User Manual

Users Manual

1

1 Phonebook

The phone offers two memory banks: the SIM card and
mobile phone, the phone's storage capacity is 100, the
storage capacity of the SIM card is decided by the type
of SIM card.

 Enter a number in the standby mode, press the

navigation key to enter the edit save the interface.



 　 If you are saved to the "mobile phone", the user

1.1 contact

select any record in the phone book list will have the
following options:

 Call: Call of the record;
 View: View detailed information on the record.
 Add Contact: Add a new contact into the phonebook.
 Send message: send a message to the record.。

If you saved to the SIM card, the user can edit

the name, telephone number. .

can edit the name, telephone number.。

 Edit: Edit the record.
 Delete: delete the record.
 Copy: copy in the same or a different memory and the

option to save to the file management.

 Mobile: contacts move between the SIM card or phone
 Add to speed dial: set the contact speed dial list.
 mark: mark a single, multiple or all of the contacts,

2

and then execute the delete contacts.

1.2delete all
Delete all contacts from the SIM card or phone；

1.3copy all
Copy all contacts from the SIM card or phone。

Your phone number

1.4
edit or remove your phone number。

1.5 Preferred storage location.

SIM card or phone can be set as the preferred storage
location.

1.6

Store state

view the current phonebook storage status.

1.7

Speed Dial

Set up speed dial state, and set the speed dial list.

3

2 message

The phone supports the sending messages (referred to as
SMS). The message is first sent to the network SMS center,
and then network to the destination user again to send.
If the destination user is not on, or can not receive, the
network will temporarily save this messages, retention
period is the decision by sending the user's settings and
service operators.
If the text messages is not full, it is directly stored
in the SIM card or phone (user settings). If the text
messages capacity is full, you can not receive new messages,
the top there will be a blinking icon in the main screen,
and prompts the SMS storage is full, delete some text
messages, inbox free space, the phone can continue to
receive new SMS.
Standby interface, you can press up and down navigation
keys, press the left soft key "OK" to enter the message
menu interface.

Write Message

2.1

 In the standby screen, select Menu →message →

write message .to enter the edit SMS interface, the
following: text editing, press the left soft key
"Options", you can choose to send, save, using a
template, edit, language, Association options. If
you want to delete the contents written by the

4

navigation key to move the cursor to delete the
contents of the back, and then press the power
button to clear, long press the right function key
to delete all content. When finished, send a message,
press the left soft key "OK".

 Send: sending a number of interface, direct enter

the number you want to send from contacts, call
history, add a number. Selection is complete, press
the left soft key "OK" to send a message. Select a
recipient the option to do the following:

 Send: send a message to the corresponding

recipient.

 Edit: you can edit the recipient's number.
 save
 Save to Drafts.
 using a template: selectable built-in templates to

send SMS.

 Edit Language: set the language need to edit.
 association option: Set to open or close

association function.

2.2 Inbox

In standby screen, select Menu → Message → Inbox,
you can view the SIM card inbox SMS has been received, as
the following options:

 View: You can view a received message.

5

 Reply: You can reply SMS to the sender.
 Forward: to forward this message to others.
 Delete: delete the current SMS.
 Copy to phone / SIM card: SMS Copy to phone / SIM

card.

 Move to phone / SIM card: SMS mobile phone / SIM

card.

 Delete All: Delete all SMS in the Inbox.
 Copy all: copy all message from the SIM card / phone

to the phone / SIM card.

 move all: all message from the SIM card / phone all

mobile phone / SIM card.

 mark: message can be marked a single or multiple

message , perform the deletion.

 Number :use message number to dial or save.

Outbox

2.3

Into the Outbox, you can view the SIM card to send and
save SMS, and can do the following: view, delete, copy to
the phone / SIM card, moving to phone, SIM card, delete
all, copy all, move all, marking multiple.

2.4

Drafts

Into the Drafts, you can view the message stored in
the Drafts, and can conduct the following operations: View,
delete, copy to the phone / SIM card, moving to phone, SIM
card, delete all, copy all, move all, marking multiple.

6

2.5 Template

Into the template, you can edit the template contents,
move the template information to write the message
interface.

2.6 setting

2.6.1 Press the left soft key to enter the message settings,
setting the following options:

 mode settings: select an suitable mode for SMS. To enter

each mode can be set on the SMS center number, the
message validity period, sending format to set it.

 General settings: set whether to open the Send Report

or not, reply the path and save the sent message.

 preferred storage location: select SIM card or phone.

Set the SMS center number, please contact your network

provider to get the SMS service center number. Such as
China Mobile in Shenzhen, the short message service
center number is: [phone]. The specific
operation: select the message center number, enter your
SMS service center number, press "OK" to save the
settings.

Setting state settings: If you have news report is set to

open when the other side to send you SMS is received,
or due to some reason can not received,the message
center will be back to send the status report, you can
conveniently to know each other has received or not.

7