30342
Table of contents
O
N
/
O
F
F
Safety instructions 7
Contents of package 7
Important Information 7
Assembly instructions 7/8
Electrical connection 7
Coding/decoding
of the cars to the according speed controller 8
False start 8
Display and range of functions 8
Training mode 8
Race modes 8
Display Settings 9
Connection PC-Unit 9
Maintenance and care 9
Troubleshooting / Driving tips 9
Technical specifi cations 9
Contents of package
1x
1x
1x 1x
Important Information
1x
8x
EXCLUSIV
EVOLUTION
Carrera DIGITAL 124/132
Carrera DIGITAL 124/132
EXCLUSIV
EVOLUTION
Welcome
Welcome to the Team Carrera!
These operating instructions contain important information regarding the assembly and operation of your Carrera DIGITAL 124 / 132
electronic lap counter. Please read them carefully and keep them in
a safe place afterwards.
If you have any queries, please do not hesitate to contact our distributor or visit our websites:
www.carrera-toys.com · www.carreraclub.com
Please check the contents for completeness and possible transport
damage. The packaging contains important information and should
also be retained.
Please take note that the electronic lap counter is only functioning in
combination with item 30344 Black Box Carrera DIGITAL 124 / 132.
The lap counter can be used with Carrera DIGITAL 124 / 132 cars.
Please refer to the Black Box operating instructions should you
require information for operating the 30344 Black Box Carrera
DIGITAL 124 / 132.
We hope you will derive a lot of pleasure from your new Carrera
DIGITAL 124 / 132 electronic lap counter.
Safety instructions
• WARNING! Not suitable for children under 36 months. Danger of
suff ocation due to small parts which may be swallowed. Caution:
risk of pinching caused by function.
• Regularly check the track and cars for damage to cables, plugs
and housings! Replace defective parts.
• The car racetrack is not suitable for outdoor operation or operation
in wet locations! Keep away from liquids.
• Do not place any metal parts onto the track to avoid short-circuits.
Do not place the track in the immediate vicinity of delicate objects,
as these could be damaged by cars hurled from the track.
• Pull the plug before cleaning the racetrack! Only use a damp cloth
for cleaning, no solvents or chemicals. When it is not in use, store
the track in a dry and dust-protected location, preferably in the original cardboard box.
• Do not operate race track at face- or eye-level – risk of injury due
to cars being catapulted off the track.
1 Standard straight
1 Standard straight with DIGITAL 124 / 132 electronic lap counter
1 End piece right
1 End piece left
8 Track section interlocks
Instructions
Please check the contents for completeness and possible transport
damage. The packaging contains important information and should
also be retained.
Assembly instructions
Carrera DIGITAL 124/132 + 30344
For installation into an existing Carrera DIGITAL 124 / 132 layout a
standard straight
up the distance.
Please note when installing the electronic lap counter 2 that the
Black Box
to the Carrera DIGITAL 124 / 132 Black Box (Art. No. 30344) using
1
is contained in the delivery quantity to make
3
must be in immediate proximity in order to attach it
Please note that Exclusiv/Evolution (analog system) and Carrera
DIGITAL 124/132 (digital system) involve two separate and completely independent systems. We hereby expressly indicate that
both systems must be kept separate when setting up the track, i.e.
no connecting rail from Exclusiv/Evolution may be used together
with the connecting rail and Black Box of the Carrera DIGITAL 124/132,
even if only one of the two connecting rails (Exclusiv/Evolution connecting rail or Carrera DIGITAL 124/132 connecting rail and Black
Box) is attached to the current supply. Furthermore, no other Carrera DIGITAL 124/132 components (switches, electronic lap counter,
pit stop) may be built into an Exclusiv/Evolution course, i.e. via analog operation.
Non-compliance with the above information may result in damage or
destruction of the respective Carrera DIGITAL 124/132 components.
In this case no warranty may be claimed.
1
4
2
a cable connection
switching on the Black Box.
Do not install the electronic lap counter directly after a curve; insert
at least one standard straight in front of the Black Box and the lap
counter.
3
4
. The electronic lap counter is initialized by
Electrical connection
Insert the standard straight with an electronic lap counter Carrera
DIGITAL 124/132 into the track layout as illustrated.
Connect the electronic lap counter to the Black Box as shown in
the illustration.
Note: To avoid short-circuits and electrocution, the toy may not be
connected using foreign devices, plugs, cables or other objects foreign to this toy. The Carrera DIGITAL 124/132 car racetrack only
works properly with an original Carrera DIGITAL 124/132 transformer.
7
Assembly instructions
CK
1 4
2 3
1
in the track as shown in fi gure
base. Move the connecting clips according to fi gure
of the arrow until they audibly snap in. The connecting clip may also
be inserted later. The connecting clips can be removed into both
directions by simply pressing down the clamped nose (see fi g.
4
sary to use the track section fasteners (Item no. 85209, not contained in the package).
Note:
Carpeting is not a suitable foundation on which to build the track because of static charging, formation of fl uff and ready infl ammability.
Before assembling please insert the connecting clips
+ 2 + 3
Fastening: To fasten the track sections on a board, it is neces-
1
. Stick tracks together on a fl at
2
Coding/decoding of the cars to
the according speed controller
1 2
2x CLICK
3
Place car on the track, push lane-change-button twice fi g. 1, lift car
at the front, put car back again fi g.
push lane-change-button twice fi g.
by a tone. All settings are saved until new programming is carried
out.
2x CLICK
2
, while car´s lights are fl ashing
3
. Programming is confi rmed
False start
False start: If a car’s speed controller is actuated during the traffi c
light phase, this is rated as false start. The vehicle that has caused
the false start will travel a short distance and the LED on the relevant vehicle or hand control will fl ash. The race is not released and
the start has to be repeated.
8
in direction
3
Display and
range of functions
1 2
3
4
).
Range of functions
1
Training mode
2
Lap races possible from 0 – 9999 laps (factory setting 50 laps)
3
Time races from 00:00:00’01 – 99:99:99:999 hours
(hh:mm:ss’ms) (factory setting 00:05’00’’00)
The electronic lap counter Carrera DIGITAL 124 / 132 disposes of a
memory function. Once the values of the factory setting are changed
the altered values remain displayed until having been reset.
4
Signal tone and fanfare horn may be switched on and off by ac-
tivating the switch (ON/OFF).
Training mode
1
Training mode
The training mode is used for training and the starting positions for
the race and can be started without setting the laps or time.
The training mode is set as follows:
1. Switch on the Black box (ON/OFF switch).
2. After approx. 1 second the central LED will illuminate perma-
nently and a brief acoustic signal will sound.
3. The Carrera DIGITAL 124 / 132 electronic lap counter automatically switches on in training mode.
4. Press the start button of the Black Box once – all of the LEDs
are constantly lit.
5. Place the pre-coded car/s on the connecting track.
6. Then press the start button again – the starting sequence is initi-
ated, the LEDs are lit and acoustic signals can be heard.
7. The training run begins with elapse of the starting sequence and
the overall time (“TIME”) and counting begins.
8. The display shows the following information:
• Allocation of the individual cars (1-6)
• Total time of training race next to “TIME”
• Lap time currently driven “LAP TIME”
ATTENTION!
Single lap times exceeding 09:59:999 cannot be displayed, illustration see fi g.
“TIME”.
While pushing BUTTON 1 during measuring, further information can
be retrieved.
• Press “BEST TIME” 1x – best lap time. Only beating the current
best time will again be displayed.
• Press “TIME” 2x – displaying the leading car (POS 1) and the other
cars´ time lag to the leading car
< 1 lap:
display of time diff erence “+ m:ss:ms” to the leading car
> 1 lap:
display of lap diff erence to the leading car “+ L 00001”
• Press “POSITION” 3x – current positioning of individual cars
• Press “LAPS” 4x – laps already driven
• Press 5x – change back to the current training race
1
. This does not aff ect the total time illustration under
9. For fi nishing the training race, push BUTTON 3 (“ESC”) once
during the race. You will return to the main menu (the word “TRAINING” fl ashes)
Race modes
Racing mode
1. For being able to switch to the racing mode after the electronic lap
counter Carrera DIGITAL 124 / 132 has automatically turned on via
the Black Box, please push BUTTON 3 (“ESC”).
2. The next display indication allows you to switch between the training- and the racing mode while pushing BUTTON 1 (“CHA”).
3. Confi rm selection of the racing mode (the word “Race” fl ashes) by
BUTTON 2 (“SEL”), the word “LAP” fl ashes.
4. You have the choice between
1
Lap Races
1.
If you like to start a lap race (“LAP”) please confi rm by pushing
BUTTON 2 (“SEL”).
2.
After confi rmation you may set the number of laps you like to complete (it is possible to set lap races from 0000 to 9999 laps, factory
setting 0050 laps).
3.
Basically you have to set the 1`s place fi rst, then the 10`s place
and the 100`s place and fi nally the 1000`s place (display cursor
fl ashes on each place). By pushing BUTTON 1 (“UP”) you increase
the number. In order to change to the next places please push BUTTON 2 (“SEL”) and set the value as described. In case the preset
number of laps shall not be changed, please confi rm by pushing
BUTTON 2 (“SEL”) until the lap display disappears.
4.
After having set the number of laps push the start button of the
Black Box once – alle LEDs will fl ash permanently.
5. Place the pre-coded car/s on the connecting track.
6. Then press the start button again – the starting sequence is initi-
ated, the LEDs are lit and acoustic signals can be heard.
7. The lap race starts after the start sequence has proceeded.
8. The total time “TIME” starts to run. Once the leading car has
passed through, its total time is displayed and updated upon each
passing.
9. The display shows the following information:
• Allocation of the individual cars (1-6)
• Total time of the leading car next to “TIME”
• Lap time currently driven “LAP TIME”
While pushing BUTTON 1 during measuring, further information can
be retrieved.
• Press “BEST TIME” 1x – best lap time. Only beating the current
best time will again be displayed
• Press “TIME” 2x – displaying the leading car (POS 1) and the
other cars´ time lag to the leading car
< 1 lap: display of time diff erence “+ m:ss:ms” to the leading car
> 1 lap: display of lap diff erence to the leading car “+ L 00001”
• Press “POSITION” 3x – current positioning of individual cars
• Press “LAPS” 4x – laps still to go
• Press 5x – change back to the current race
10. As soon as all cars have fi nished the last lap a signal indicating
the end of the race is audible and the display starts to fl ash.
11. For returning to the main menu push BUTTON 3 once („ESC“)
1
Time Racing
1. In order to measure the time of a time race please follow steps
1-3 (see lap races).
2. To start a time race after mode selection lap race (“RACE”) push
BUTTON 1 (“CHA”) for changing from the lap race mode (“LAP”) to
the time race mode (“TIME”).
3. Confi rm selection of time race (“TIME”) by BUTTON 2 (“SEL”).
4. After confi rmation the seconds´ position of the time display will
fl ash (factory setting 00:05:00 min.).
5. Basically you have to set the seconds fi rst, then the minutes
and fi nally the hours (display cursor fl ashes on each position). By
pushing BUTTON 1 (“UP”) you increase the number. In order to
change to the next positions please push BUTTON 2 (“SEL”) and
set the value as described. In case the preset racing time shall not
be changed please confi rm by pushing BUTTON 2 (“SEL”) until the
ltime display disappears.
6. After having set the requested time for the race push the start button of the Black Box once – alle LEDs will fl ash permanently.
7. Place the pre-coded car/s on the connecting track.
8. Then press the start button again – the starting sequence is initi-
ated, the LEDs are lit and acoustic signals can be heard.
9. The time race starts after the start sequence has proceeded.
10. The total time “TIME” starts to run backwards.
11. The display shows the following information:
• Allocation of the individual cars (1-6)
• Total time still to be driven “TIME”
• Lap time currently driven “LAP TIME”
While pushing BUTTON 1 during measuring, further information can
be retrieved
12. After the total time set has expired the race is fi nished. A signal
will be audible and the display starts to fl ash.
13. For returning to the main menu push BUTTON 3 once (“ESC”)
1
lap race and
2
time races.
y
ca b
1 2
Display Settings
Maintenance and care
1
3
1
Contrast-Setting Display
Switch off Black Box. Keep Button 1 (Lap Time Option) pushed
while switching on the Black Box until the display changes according to fi gure.
Line “TIME” (1) indicates the corresponding software version. The
display´s contrast can be changed (max. 20) by
“CHA
“ and “CHA
2
Display Check
Switch off Black Box. Keep Button 3 (ESC) pushed while switching
on the Black Box until the display changes according to fi gure.
3
Factory Setting
For resetting all data please switch off Black Box. Keep Button 2
(RESET) pushed while switching on the Black Box until the display
changes according to fi gure.
”.
Connection PC-Unit
1
A B
2
To ensure a proper operation of the motor-racing circuit, all racetrack components should be regularly cleaned. Pull the plug prior
to cleaning.
1
Racetrack: Keep the track surface and track slots clean with a
dry cloth. Do not use any solvents or chemicals for cleaning. When
it is not in use, store the racetrack in a clean and dust-protected
location, preferably in the original cardboard box.
Troubleshooting
Driving tips
Troubleshooting:
In case of any malfunctions, please check the following:
• Has the connection to the power supply been established correctly?
• Have transformer and speed controllers been connected
correctly?
• Are the track connections faultless?
• Are the racetrack and track slots clean and free of any foreign
objects?
• Are the sliding contacts in order and do they make contact with
the track slot?
• Are the cars correctly coded to the according speed controller?
• The track‘s current feed will be switched off automatically for 5
seconds, if there is an electrical short circuit: this will be notifi ed by
audible and visual signals.
• Are the cars placed on the track in running direction? In case of
non-functioning push the running direction switch which is on the
car´s bottom.
• Are the correct guide keels being used and which mode has been
selected.
• Insert at least one standard straight in front of Black Box and lap
counter.
Note:
During operation small car parts as spoilers or mirrors may get off or
brake due to being original detailed parts of the car model. To avoid
this it is possible to remove them before operation.
All Carrera spare parts are available in the webshop:
www.carrera-toys.com
Delivery exclusively to Germany, Austria, Netherlands, Belgium and
Luxembourg.
For displaying purposes of your lap counter on a computer we recommend the Carrera DIGITAL 124/132 PC-Unit (item no. 30349). In
addition you can manage your own databases for cars and drivers.
Technical specifications
Output voltage · Toy transformer
14,8 V 51,8 VA
18 V
This device is marked by “selective sort throught” symbol related to
sort through domestic, electric and electronic, waste.
This means the product must be treated by a specialized “sorting/
collecting” system in accordance with European directive 2002/96/
CE, to reduce the impact upon environment.
For more precise information, please contact your local administration.
Electronical product which are not going through special collecting, are potentially dangerous for environment and human health,
because of dangerous substance.
54 VA
9
Loading...