CARR 185002 Universal Hitch Step User Manual

MOUNTING INSTRUCTIONS FOR

CARR

MATERIALS NEEDED:

Two adjustable

wrench

es, one

Carr Pattern Co., Inc.

REAR BUMPER STEP

Part No: 185002

WARNINGS!

 Do not over tighten the nuts and bolts or damage to the castings and or stripping of the threads could result.
 FOR SAFE AND PROPER USAGE OF THIS PRODUCT, THE MOUNTING INSTRUCTIONS MUST BE

FOLLOWED CAREFULLY AND COMPLETELY.

 The manufacturer and distributor of this product are in no way responsible for the consumer’s failure to adhere to the

warnings and directions of these instructions in the event of damage to the consumer’s vehicle, other properties and or
personal injury.

This step fits the following vehicles:

Any truck bumper with a ¾” or 1” ball receiver.

9/16” wrench.
MATERIAL FURNISHED: One step casting, one steel

bracket, one hardware pack and instruction sheet.

1. Bolt the step casting to the steel bracket with the

hardware provided. Make sure that the flat washer is
against the castings and the split lock washer is
against the underside of the bolt.

2. Use the center hitch receiver hole on your bumper to

mount the step.

NOTE: You may have to knockout the plastic cover.

3. Place your step on the bumper so that the slotted hole

on the steel bracket lines up with the center hole on
your bumper.

4. Make sure you push the steel bracket up against your

bumper as far as it can go to increase the rigidity of the
step.

5. Place your hitch receiver ball through the slotted hole

in the steel bracket and the hole in your bumper and
use the adjustable wrenches to tighten securely to your
bumper.

6. Your step is now ready to go!

Quality and Style that Endures

Follow the diagram and the

written directions carefully for a

proper, safe installation.

Should you encounter an

unusual, unforeseen problem,

contact our Technical Help Line

7:00 AM – 3:00 PM Pacific

Time

[phone]

Visit our web-site at

www.CARR.com

Carr Pattern Co., Inc.

Finishes: Limited Lifetime
Structural Warranty: Limited Lifetime
Warranty Conditions:

a. All warranties start from consumer’s date of purchase.
b. A new product will be sent out immediately to replace a warranty claim.
c. The above guidelines apply only to the Original Purchaser.
d. Original proof of purchase must be submitted for all warranty and returns issues.

Warranty Limitations:

a. Warranty coverage extends ONLY to repair or replacement of the CARR product. This warranty does not cover the cost of labor, transportation, installation or removal of the product.
b. Warranty coverage does not extend to damage caused by: collision, fire, theft, freezing, vandalism, riot, explosion or object striking the product, or misuse of the product and/or the vehicle on

which the product is being installed.

c. Warranty coverage does not extend to damage caused by: airborne fallout (chemicals, tree sap, etc.), stones, hail, earthquake, water or flood, windstorm, lightning, the application of chemicals or

sealants subsequent to manufacture.

d. Warranty coverage does not extend to damages caused by: normal wear and tear, abuse, modification or improper installation of the product.
e. Warranty coverage does not extend to any economic loss or extra expense including (without limitation), payment for the loss of time or pay, inconvenience, storage, loss of vehicle use, vehicle

rental expense, equipment rental expense, lodging, meals, or other travel costs.

Other Terms:

This warranty gives you specific legal rights and you may also have other rights that vary from state to state. CARR does not authorize any person to create for it any other obligation or liability in
connection with its products. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WRITTEN WARRANTY. PERFORMANCE OF REPAIRS AND NEEDED ADJUSTMENTS IS THE EXCULSIVE REMEDY UNDER THIS
WRITTEN WARRANTY OR ANY IMPLIED WARRANTY. CARR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM BREACH OF
THIS WRITTEN WARRANTY.*
*Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, so that above limitations or exclusions may not
apply to you.
Guarantee: Every attempt has been made to manufacture and distribute the finest quality products available. Our manufactured products are guaranteed to be free of defects due to workmanship or
materials. Distributed products are subject to manufacturer’s warranty only.

Warranty Policy